مطالعه آزمایشگاهی تأثیر فاصله مانع سکویی مستغرق جلوی موج‌شکن توده‌سنگی شکل‌پذیر در کاهش عدد آسیب

Andersen TL, “Hydraulic response of rubble mound breakwaters (scale effects- berm breakwaters)”, University of Alborg, Denmark, 2006.

Bungin ER, “The effect of square submerged breakwater on wave transmission in the coastal area”, AC2SET (2020), IOP Conf. series: Materials Science and Engineering, 2021.

Burcharth HF, “Design of breakwaters”, Department of Civil Engineering, Alborg University, Denmark, 1993.

Campos A, Castillo C, Sanchez RM, “Damage in rubble mound breakwaters. Part I: Historical review of damage models”, Journal of Marine Science and Engineering, 2020, 8, 317.

Cox JC, Clark GR, “Design and development of a tandem breakwater system for Hammond Indiana”, Coastal structures and breakwaters. Thomas Telford, London, 1992, 111-121.

He F, Huang Z, Law AW, “Hydrodynamic performance of a rectangular floating breakwater with and without pneumatic chambers: An experimental study”, Ocean Engineering, 2012, 51, 16-27.

Janardhan P, Harish N, Rao S, Shirlal KG, “Performance of variable selection method for the damage level prediction of reshaped berm breakwater”, ICWRCOE, Aquatic Procedia, 2015, 4, 302-307.

Jian Xu T, Wang XR, Guo WJ, Dong H, Hou HM, “Numerical simulation of combined effect of pneumatic breakwater and submerged breakwater on wave damping”, Taylor and Francis: Ships and offshore structures, 2020.

Juhl J, Jensen OJ, “Features of berm breakwaters and practical experience”, Proceeding of International Conference on coastal and port Eng. in developing countries. RJ Brazil, 1307-1320.

Lamberti A, Tomasicchio GR, Guiducci F, “Reshaping breakwaters in deep and shallow water conditions”, Proceeding of 24th International Conference on Coastal Engineering Kobe, Japan, ASCE, 1994, 1343-1358.

Neves AC, Veloso Gomes F, Taveira Pinto F, “Analysis of the wave-flow interaction with submerged breakwaters”, WIT Transactions on Modelling and Simulation, 2007, 46, 147-154.

Panagiota G, Christos M, Panayotis P, “Optimized reliability-based upgrading of rubble mound breakwaters in a changing climate”, Journal of Marine Science and Engineering, 2018, 6 (92).

Qin H, Mu L, Tang W, Hu Z, “Numerical study of the interaction between peregrine breather based freak waves and twin-plate breakwater”, Journal of Fluids and Structures, 2019, 87, 206-227.

Quiroga I, Vidal C, Lara J, Gonzalez M, Sainz A, “Stability of rubble-mound breakwaters under tsunami first impact and overflow based on laboratory experiments”, Coastal Engineering, 2018, 135, 39-54.

Rao S, Pramod rao B, “Stability of berm breakwater with reduced armour stone weight”, Ocean Engineering, 2003, 31, 1577-1589.

Sayao O, Da Silva RF, “Analysis of rubble mound breakwater damage: Case study of existing breakwater rehabilitation”, IX Pinac Copedec Conference, 2016.

Sayao O, “On the profile reshaping of berm breakwaters”, Coastal structures, 1998, 99, 224-265.

Smith DAY, Warner PS, Sorensen RM, “Submerged-crest breakwater design, advances in coastal structures and breakwaters”, Thomas Telford, London, 1996, 208-219.

Stefanutti Stocks Marine, “Rubble mound breakwater vs tandem breakwater cost estimation”, Cape Town, Stefanutti Stocks Marine, 2015.

Tulsi K, Phelp D, “Monitoring and maintenance of breakwaters which protect port entrances”, Proceeding of the 28th South African Transport Conference, 2009, 317-332.

Twu SW, Liu CC, Hsu WH, “Wave damping characteristics of deeply submerged breakwaters”, ASCE Journal of Waterway, Port, Coastal, and Ocean Engineering, 2001, 127 (2), 97-105.

Van der Meer JW, “Conceptual design of rubble mound breakwaters”, Delft Hydraulics, Report No. 483, 1993.