مبدل dc- dc افزاینده تک‌ورودی-چندخروجی توسعه‌یافته

[1]      E. Babaei, O. Abbasi, S. Sakhavati, “An overview of different topologies of multi-port dc/dc converters for dc renewable energy source applications. In Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON),” International Conference on IEEE. pp. 1-6, 2016.

[2]      A. Nami, F. Zare, A. Ghosh, F. Blaabjerg, “Multi-output DC–DC converters based on diode-clamped converters configuration: topology and control strategy, ” IET power electronics, vol. 3, no. 2, pp. 197-208, 2010.

[3]      L. Müller, J. W. Kimball, “High gain DC–DC converter based on the Cockcroft–Walton multiplier, ” IEEE Transactions on Power Electronics, vol. 31, no. 9, pp. 6405-6415, 2016.

[4]      لیلا محمدیان، ابراهیم بابائی، محمدباقر بناءشریفیان، "ارائه روش جدیدی برای مدل‌سازی مبدل کاهنده- افزاینده دو سویه با استفاده از شیوه جدیدی از روش گراف سیگنال جریان و به کارگیری آن در سیستم مدیریت انرژی خودروی برقی"، مجله مهندسی برق دانشگاه تبریز، جلد 46، شماره 2، صفحات 221 تا 235، تابستان 1395.

[5]      J. C. Rosas-Caro, J. M. Ramirez, F. Z. Peng, A. Valderrabano, “A DC–DC multilevel boost converter,” IET Power Electronics, vol. 3, no. 1, pp. 129-137, 2010.

[6]      J. Pou, R. Pindado, D. Boroyevich, “Voltage-balance limits in four-level diode-clamped converters with passive front ends,” IEEE Transactions on Industrial Electronics, vol. 52, no. 1, pp. 190-196, 2005.

[7]      H. Ertl, T. Wiesinger, J. W. Kolar, “Active voltage balancing of DC-link electrolytic capacitors,” IET Power Electronics, vol. 1, no. 4, pp. 488-496, 2008.

[8]      A. A. Boora, F. Zare, A. Ghosh, “Multi-output buck–boost converter with enhanced dynamic response to load and input voltage changes,” IET power electronics, vol. 4, no. 2, pp. 194-208, 2011.

[9]      A. Nami, F. Zare, G. Ledwich, A. Ghosh, F. Blaabjerg, “A new configuration for multilevel converters with diode clamped topology,” International Power Engineering Conference IEEE, pp. 661-665, 2007.

[10]      H. Behjati, A. Davoudi, “Single-stage multi-port DC–DC converter topology,” IET Power Electronics, vol. 6, no. 2, pp. 392-403, 2013.

[11]      D. Ma, W. H. Ki, C. Y. Tsui, “A pseudo-CCM/DCM SIMO switching converter with freewheel switching,” IEEE Journal of Solid-State Circuits, vol. 38, no. 6, pp. 1007-1014, 2003.

[12]      H. Behjati, A. Davoudi, A multi-port converter with independent outputs for vehicular applications,” In Vehicle Power and Propulsion Conference (VPPC), pp. 1-5, 2011.

[13]      R. L. Lin, C. R. Pan, K. H.Liu, “Family of single-inductor multi-output DC–DC converters,” in Proc. PEDS, pp. 1216-1221, 2009.

[14]      H. Behjati, A. Davoudi, “A multiple-input multiple-output DC–DC converter,” IEEE Trans. Ind. Appl, vol. 49, no. 3, pp. 1464-1479, 2013.

[15]      D. Trevisan, W. Stefanutti, P. Mattavelli, P. Tenti, “FPGA control of SIMO DC–DC converters using load current estimation,” in Proc. IECON, pp. 6, 2005.

[16]      S. Chakraborty, A. K. Jain, N. Mohan, “A novel converter topology for multiple individually regulated outputs,” IEEE Transactions on Power Electronics, vol. 21, no. 2, pp. 361-369, 2006.

[17]      A. A. Boora, A. Nami, F. Zare, A. Ghosh, F. Blaabjerg, “Voltage-sharing converter to supply single-phase asymmetrical four-level diode-clamped inverter with high power factor loads,” IEEE Transactions on Power Electronics, vol. 25, no. 10, pp. 2507-2520, 2010.

[18]      R. Prem, S. Manmadhan, V. K. Devi, “Wireless control of DC–DC converter,” in Proc. Power and Energy Systems Conference: Towards Sustainable Energy, pp. 1-6, 2014.

[19]      J. D. Dasika, B. Bahrani, M. Saeedifard, A. Karimi, A. Rufer, “Multivariable control of single-inductor dual-output buck converters,” IEEE Transactions on Power Electronics, vol. 29, no. 4, pp. 2061-2070, 2014.

[20]      J. Weinstein, S. C. Huerta, Z. Zhao, J. Mincey, Z. Moussaoui, “Optimized phase positioning for minimizing input filter requirements in single-input multiple-output switch-mode power supplies,” in Proc. APEC, pp. 455-459و2014.

[21]      A. P. Dancy, R. Amirtharajah, A. P. Chandrakasan, “High-efficiency multiple-output DC–DC conversion for low-voltage systems,” IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 8, no. 3, pp. 252-263, 2000.

[22]      E. C. dos Santos, “Dual-output dc–dc buck converters with bidirectional and unidirectional characteristics,” IET Power Electronics, vol. 6, no. 5, pp. 999-1009, 2013.

[23]      M. Belloni, E. Bonizzoni, F. Maloberti, “On the design of single-inductor double-output DC–DC buck , boost and buck-boost converters,” in Proc. ICECS,. pp. 626-629, 2008.

[24]      D. Gunasekaran, L. Qin, U. Karki, Y. Li, F. Z. Peng, “Multi-level capacitor clamped DC–DC multiplier/divider with variable and fractional voltage gain-an (n/m) X DC–DC converter,” in Proc. APEC, pp. 2525-2532, 2016.

[25]      J. Yang, Z. He, H. Pang, G. Tang, “The hybrid-cascaded DC–DC converters suitable for HVDC applications,” IEEE Transactions on Power Electronics, vol. 30, no. 10, pp. 5358-5363, 2015.

[26]      N. Deshpande, R. D. Chavhan, N.Deshpande, “Coupled inductor based single-input multiple-outputs boost converter, ” in Proc. AEEICB, pp. 126-130,2017.

[27]      R.J. Wai, K. H. Jheng, “High-efficiency single-input multiple-output DC–DC converter,” IEEE Transactions on Power Electronics, vol. 28, no. 2, pp. 886-898, 2013.

[28]      W. Huang, J. A. A. Qahouq, Z. Dang, “CCM–DCM power-multiplexed control scheme for single-inductor multiple-output DC–DC power converter with No cross regulation,” IEEE Transactions on Industry Applications, vol. 53, no. 2, pp. 1219-1231, 2017.

[29]      محسن کربعلی زاده، نوید رضا ابجدی، غلامرضا عرب مارکده، جعفرسلطانی، "کنترل تطبیقی با خطی سازی فیدبک ورودی-خروجی یک مبدل تشدیدی سری-موازی مستقیم- مستقیم "، مجله مهندسی برق دانشگاه تبریز، جلد 44، شماره 1، صفحات 33 تا 42، بهار 1393.

[30]      B. Wu, S. Li, Y. Liu, K. M. Smedley, “A new hybrid boosting converter for renewable energy applications,” IEEE Transactions on Power Electronics, vol. 31, no. 2, pp. 1203-1215, 2016.

[31]      S. Bahravar, H. M. Mahery, E. Babaei, M.Sabahi, “Mathematical modeling and transient analysis of DC–DC- buck-boost converter in CCM,” in Proc. IICPE, pp. 1-6,2012.

[32]      S. Bahravar, E. Babaei, S. H.Hosseini, “New cascaded multilevel topology with reduced variety of magnitudes of dc voltage sources,” in Proc. IICPE, pp. 1-6, 2012.

[33]      E. Babaei, S. Laali, S. Bahravar, “A new cascaded multi-level inverter topology with reduced number of components and charge balance control methods capabilities,” Electric Power Components and Systems, vol. 43, no. 19, pp. 2116-2130, 2015.