بررسی تأثیر پارامترهای جاذب ضربه بر دینامیک هواپیما در هنگام فرود بر روی باند ناهموار

[1] Currey, Norman. S. “Aircraft Landing Gear Design: Principles and Practices”, AIAA Education Series, USA, 1998.

[2] Choi, Y. T., Wereley, N. M, “Vibration Control of a Landing Gear System Featuring Electro rheological Magneto rheological Fluids”, Journal of Aircraft, Vol. 40, No. 3, pp. 432–439, 2003.

[3] Flugge, W., “Landing-Gear Impact”, NACA TN 2743, 1952.

[4] Milwitzky, B., Cook, F. E., “Analysis of Landing-Gear Behavior”, NACA Report 1154, 1953.

[5] Yadov, D., Ramamoorthy, R. P., “Nonlinear Landing Gear Behavior at Touchdown”, Journal of Dynamic Systems Measurement and Control, Vol. 113, pp. 677–683, 1991.

[6] Moreland, W.J., “Landing Gear Vibration”, AF Technical Report, No. 6590, 1951.

[7] Ottens, H.H., “Predicted and Measured Landing Gear Loads for the NF-5 Aircraft Taxiing Over Bumpy Runway”, Aircraft Dynamic Response to Damage and Repaired Runways, AGARD CP-326, 1982.

“Predicted and Measured Landing Gear Loads for the NF-5 Aircraft Taxiing Over Bumpy Runway”, Aircraft Dynamic Response to Damage and Repaired Runways, AGARD CP-326, 1982. “An Experimental-Analytical Routine for the Dynamic Qualification of Aircraft Operating on Rough Runway Surfaces”, AGARD R-731, 1987.

[9] Gerardi, Tony G., Minnetyan, L., “Status of Computer Simulations of USAF Aircraft and an Alternative Simulation Technique”, Aircraft Dynamic Response to Damaged and Repaired Runways, AGARD-CP-326, pp. 1 I-1-11-10, 1982.

[10] Shepherd, A., Catt, T., Cowling, D., ., “An Aircraft Landing Gear Simulation Parametric Leg Model”, SDL Rept. No. 234, Stirling Dynamics Limited, 1993.

[11] Catt, T., Cowling, D., and Shepherd, A., “Active Landing Gear Control for Improved Ride Quality during Ground Roll”, SDL Rept. No. 232, Stirling Dynamics Limited, 1992.

[12] Wriggers, P., “Computational Contact Mechanics”, John Wiley & Sons, USA, 2001. [13] Dam, A.A. ten, “Unilaterally Constrained Dynamical Systems”, PhD Thesis, University of Groningen, 1997.

[14] Dam, A.A. ten, Lammen, W.F., and Rozema, G., “Real-time simulation of hybrid aerospace systems”, Proceedings ENOC 2005 Conference, Eindhoven, The Netherlands, 2005.

[15] Lee, T.W., “Dynamic response of landing gears on rough repaired runway”, Menasco Aero Systems Division, pp.124–135, 1998.

[16] Wang. H., Xing. J.T., Price. W.G.,Weiji. Li, “An investigation of an active landing gear system to reduce aircraft vibration caused by landing impacts and runway excitation”, Journal of Sound and Vibration, Vol. 317, pp. 50-66, 2008.

[17] Yueping, G., “A statistical model for landing gear noise prediction”, Journal of Sound and Vibration, Vol. 285, pp. 61-87, 2004.

[18] Freymann, R., “Actively damped landing gear system”, Landing Gear Design Loads Conference, No. 20, AGARD CP-484, 1991.

[19] Niezgoda T., Malachowski J., Kowalski W., “Numerical Simulation of Landing Gear dynamics”, Mechanical Computation, Vol. 21, pp. 2579-2586, 2002.

[20] Sharp J.J., “Basic Fluid Mechanics”, Butterworths, London, 1988.

[21] Nel, East Kilbride, Glasgow, “The orifice plate discharge coefficient equation-further work”, Flow Mea. Instrum., Vol. 6, No. 2, pp. 101-114, 1995.

[22] Houten, M.H. van, “Crash and impact at NLR(1990-2006)”, Proceedings IMechE conference Design for impact and Crashworthiness in Aerospace and Automotive Vehicle Structures, Loughborough University, UK, NLR-TP-2007-770, 2006.

[23] Lammen, W., Van Houten, R., “Predictive Simulation of Impact Phenomena for Innovations in aircraft Component Design”, ENOC, Saint Petersburg, Russia, 30-July 2008.