معرفی و ارزیابی جامع نسل نوینی از مهار مکانیکی با قابلیت استفاده در پایدارسازی‌های ژئوتکنیکی

BLAKE A, O’LOUGHLIN C, “Installation of dynamically embedded plate anchors as assessed through field tests”, Canadian Geotechnical Journal, 2015, 52, 1270-1282.

BLAKE A, O’LOUGHLIN C, GAUDIN C, “Capacity of dynamically embedded plate anchors as assessed through field tests”, Canadian Geotechnical Journal, 2014, 52, 87-95.

CASSIDY M, GAUDIN C, Randolph M, Wong P, Wang D, Tian Y, “A plasticity model to assess the keying of plate anchors”, Géotechnique, 2012, 62, 825.

Copstead RL, Studier DD, “An earth anchor system: installation and design guide”, Gen. Tech. Rep. PNW-GTR-257. Portland, OR: US Department of Agriculture, Forest Service, Pacific Northwest Research Station, 1990, 35, 257.

DAS BM, Shukla SK, “Earth anchors”, Journal of Ross Publishing, 2013.

Gaudin C, O’loughlin C, Randolph M, Cassidy M, Wang D, Tian Y, Hambleton J, Merifield R, “Advances in offshore and onshore anchoring solutions”, Australian Geomechanics, 2014, 49, 59-72.

Gaudin C, O'loughlin C, Randolph M, Lowmass A, “Influence of the installation process on the performance of suction embedded plate anchors”, Géotechnique, 2006, 56, 381-391.

Gaudin C, Simkin M, White DJ, O’loughlin CD, “Experimental investigation into the influence of a keying flap on the keying behaviour of plate anchors”, The Twentieth International Offshore and Polar Engineering Conference, 2010. International Society of Offshore and Polar Engineers.

Gaudin C, Tian Y, Cassidy M, Randolph M, O’loughlin C, “Design and performance of suction embedded plate anchors”, Proceedings of 3rd International Symposium on Frontiers in Offshore Geotechnics. Oslo: CRC Press, 2015. 863-868.

Han C, Wang D, Gaudin C, O'loughlin C, Cassidy M, “Behaviour of vertically loaded plate anchors under sustained uplift”, Géotechnique, 2016, 66, 681-693.

Hoek E, Kaiser PK, Bawden WF, “Support of underground excavations in hard rock”, CRC Press, 2000.

Hung CJ, Monsees J, Munfah N, Wisniewski J, “Technical manual for design and construction of road tunnels-civil elements”, US Department of Transportation, Federal Highway Administration, National Highway Institute, New York, 2009.

Kulhawy FH, Trautmann CH, Nicolaides CN, “Spread foundations in uplift: experimental study”, Foundations for Transmission Line Towers, 1987. ASCE, 96-109.

Liu J, Liu M, Zhu Z, “Sand deformation around an uplift plate anchor”, Journal of Geotechnical and Geoenvironmental Engineering, 2011, 138, 728-737.

Moghadam MJ, Zad A, Mehrannia N, Dastaran N, “Experimental evaluation of mechanically stabilized earth walls with recycled crumb rubbers”, Journal of Rock Mechanics and Geotechnical Engineering, 2018a, 10, 947-957.

Moghadam MJ, Zad A, Mehrannia N, Dastaran N, “Experimental study of the influence of the shape and configuration of plate anchors on retaining walls”, International Journal of Physical Modelling in Geotechnics, 2018b, 1-49.

O’loughlin C, Blake A, Richardson M, Randolph M, Gaudin C, “Installation and capacity of dynamically embedded plate anchors as assessed through centrifuge tests”, Ocean Engineering, 2014, 88, 204-213.

O'loughlin C, Blake A, Gaudin C, “Towards a simple design procedure for dynamically embedded plate anchors”, Géotechnique, 2016, 66, 741-753.

O'loughlin C, White D, Stanier S, “Novel Anchoring Solutions for FLNG-Opportunities Driven by Scale”, Offshore Technology Conference, 2015, Offshore Technology Conference.

Randolph M, Gourvenec S, White D, Cassidy M, “Offshore geotechnical engineering”, Spon Press New York, 2011.

Shelton JT, “OMNI-Maxtrade anchor development and technology”, OCEANS 2007, 2007, IEEE, 1-10.

Song, Z, Hu Y, O’loughlin C, Randolph MF, “Loss in anchor embedment during plate anchor keying in clay”, Journal of Geotechnical and Geoenvironmental Engineering, 2009, 135, 1475-1485.

Tsuha CDHC, Aoki N, Rault G, Thorel L, Garnier J, “Evaluation of the efficiencies of helical anchor plates in sand by centrifuge model tests”, Canadian Geotechnical Journal, 2012, 49, 1102-1114.

Wang D, Merifield R, Gaudin C, “Uplift behaviour of helical anchors in clay”, Canadian Geotechnical Journal, 2013, 50, 575-584.

Wang D, O’loughlin C, “Numerical study of pull-out capacities of dynamically embedded plate anchors”, Canadian Geotechnical Journal, 2014, 51, 1263-1272.