ارزیابی بهسازی زیستی خاک‌های آلوده به روغن موتور

Achal V, Mukherjee A, Basu PC, Reddy MS, “Lactose mother liquor as an alternative nutrient source for microbial concrete production by Sporosarcina pasteurii”, Journal of industrial microbiology & biotechnology, 36, 433-438.

Akinwumi, II, Booth C, Diwa D, Mills P, “Cement stabilisation of crude-oil-contaminated soil”, Proceedings of the ICE-Geotechnical Engineering, 2016, 336-345.

Al-Sanad HA, Eid WK, Ismael NF, “Geotechnical properties of oil-contaminated Kuwaiti sand”, Journal of Geotechnical Engineering, 1995, 121, 407-412.

ASTM-D422-63, e2 Standard Test Method for Particle-Size Analysis of Soils (Withdrawn 2016), 2007.

ASTM-D2166, American Society for Testing and Materials D2166 (1999) Standard test method for unconfined compressive strength of cohesive soils, Annual Books of ASTM Standards, 1999.

ASTM-D3080 American Society for Testing and Materials D3080 (1999), Standard test method for direct shear test of soils under consolidated drained conditions, Annual Books of ASTM Standards, 1999.

ASTM-D5084 16a Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter.

Azadi M, Ghayoomi M, Shamskia N, Kalantari H, “Physical and mechanical properties of reconstructed bio-cemented sand”, Soils and Foundations, 2017, 57, 698-706.

Bahmani SH, Farzadnia N, Asadi A, Huat BB, “The effect of size and replacement content of nanosilica on strength development of cement treated residual soil”, Construction and Building Materials, 2016, 118, 294-306.

Baled HO, Gamwo IK, Enick RM, Mchugh MA, “Viscosity models for pure hydrocarbons at extreme conditions: A review and comparative study”, Fuel, 2018, 218, 89-111.

BU C, Wen K, Liu S, Ogbonnaya U, Li L, “Development of bio-cemented constructional materials through microbial induced calcite precipitation”, Materials and Structures, 2018, 51, 30.

Buckley JS, Liu Y, Monsterleet S, “Mechanisms of wetting alteration by crude oils”, SPE Journal, 1998, 3, 54-61.

Canakci H, Sidik W, Kilic IH, “Bacterail Calcium Carbonate Precipitation in Peat”, Arabian Journal for Science and Engineering, 2015, 40, 2251-2260.

Chao C, Genot C, Rodriguez C, Magniez H, Lacourt S, Fievez A, Van Hecke E, “Emollients for cosmetic formulations: Towards relationships between physico-chemical properties and sensory perceptions”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2018, 536, 156-164.

Cheng L, Cord-Ruwisch R, “In situ soil cementation with ureolytic bacteria by surface percolation”, Ecological Engineering, 2012, 42, 64-72.

Cheng L, Cord-Ruwisch R, Shahin MA, “Cementation of sand soil by microbially induced calcite precipitation at various degrees of saturation”, Canadian Geotechnical Journal, 2013, 50, 81-90.

Cheng L, Shahin MA, “Stabilisation of oil-contaminated soils using microbially induced calcite crystals by bacterial flocs”, Géotechnique Letters, 2017, 1-6.

Construction S, Management Commission, In: (DGJ08-37-2002), C.F.I.O.G.E. (ed.). Shanghai (in Chinese), 1997.

Danov KD, Georgiev MT, Kralchevsky PA, Radulova GM, Gurkov TD, Stoyanov SD, Pelan EG, “Hardening of particle/oil/water suspensions due to capillary bridges: Experimental yield stress and theoretical interpretation”, Advances in colloid and interface science, 2017.

Dejong JT, Fritzges MB, Nusslein K, “Microbially induced cementation to control sand response to undrained shear”, Journal of Geotechnical and Geoenvironmental Engineering, 2006, 132, 1381-1392.

Dorobantu LS, Yeung AK, Foght JM, Gray MR, “Stabilization of oil-water emulsions by hydrophobic bacteria”, Applied and environmental microbiology, 2004, 70, 6333-6336.

Estabragh AR, Kholoosi M, Ghaziani F, Javadi AA, “Mechanical and leaching behavior of a stabilized and solidified anthracene-contaminated soil”, Journal of Environmental Engineering, 2017, 144, 04017098.

Evgin E Das BM, “Mechanical behavior of an oil contaminated sand”, Environmental Geotechnology, Usmen & Acar (eds), Balkema, Rotterdam, 1992.

George S, Aswathy EA, Sabu B, Krishnaprabha NP, George M, “Stabilization of diesel oil contaminated soil using fly ash”, International Journal of Civil and Structural Engineering Research, 2015, 2, 118-123.

Ghaly AM “Strength remediation of oil contaminated sands”, In The Seventeenth International Conference on Solid Waste Technology and Management, 2001, Philadelphia.

Ghasemzadeh H, Tabaiyan M, “The effect of diesel fuel pollution on the efficiency of soil stabilization method”, Geotechnical and Geological Engineering, 2017, 35, 475-484.

Ghobadi MH, Abdilor Y, Babazadeh R, “Stabilization of clay soils using lime and effect of pH variations on shear strength parameters”, Bulletin of Engineering Geology and the Environment, 2014, 73, 611-619.

Hamzah A, Zarin MA, Hamid AA, Omar O, Senafi S, “Optimal physical and nutrient parameters for growth of Trichoderma virens UKMP-1M for heavy crude oil degradation”, Sains Malaysiana, 2012.

Holtz RD, Kovacs WD, “An Introduction to geotechnical engineering”, Prentice-Hall, Inc. Englewood Cliffs, 1981, New Jersey, 2012.

Huang Y, Wang L, “Experimental studies on nanomaterials for soil improvement: a review”, Environmental Earth Sciences, 2016, 75, 497.

Ivanov V, Chu J, “Applications of microorganisms to geotechnical engineering for bioclogging and biocementation of soil in situ”, Reviews in Environmental Science and Bio/Technology, 2008, 7, 139-153.

Ivanov V, Chu J, Stabnikov V, “Basics of construction microbial biotechnology”, In Biotechnologies and Biomimetics for Civil Engineering, Springer International Publishing, 2015, 21-56.

Kermani M, Ebadi T, “The effect of oil contamination on the geotechnical properties of fine-grained soils”, Soil and Sediment Contamination: An International Journal, 2012, 21, 655-671.

Khamehchiyan M, Charkhabi AH, Tajik M, “Effects of crude oil contamination on geotechnical properties of clayey and sandy soils”, Engineering Geology, 2007, 89, 220-229.

Khosravi E, Ghasemzadeh H, Sabour MR, Yazdani H, “Geotechnical properties of gas oil-contaminated kaolinite”, Engineering Geology, 2013, 166.

Kogbara RB, “A review of the mechanical and leaching performance of stabilized/solidified contaminated soils”, Environmental Reviews, 2013.

Li M, Wen K, Li Y, Zhu L, “Impact of oxygen availability on microbially induced calcite precipitation (MICP) treatment”, Geomicrobiology Journal, 2018, 35, 15-22.

Liu C, Yu XJ, “The Interaction between Contaminant and Soil, and Its Mechanism”, 2017.

Meegoda NJ, Ratnaweera P, “Compressibility of contaminated fine-grained soils”, 1994.

Mitarai N, Nori F, “Wet granular materials”, Advances in Physics, 2006, 55-45-1.

Nasehi SA, Uromeihy A, Nikudel MR, Morsali A, “Influence of gas oil contamination on geotechnical properties of fine and coarse-grained soils”, Geotechnical and Geological Engineering, 2016, 34, 333-345.

Nasr AM, “Utilisation of oil-contaminated sand stabilised with cement kiln dust in the construction of rural roads”, International Journal of Pavement Engineering, 2014, 15, 889-905.

Nazir AK, “Effect of motor oil contamination on geotechnical properties of over consolidated clay”, Alexandria Engineering Journal, 2011, 50, 331-335.

Nespeca MG, Piassalonga GB, De Oliveira JE, “Infrared spectroscopy and multivariate methods as a tool for identification and quantification of fuels and lubricant oils in soil”, Environmental monitoring and assessment, 2018, 190, 72.

Omoregie AI, Khoshdelnezamiha G, Senian N, Ong DEL, Nissom PM, “Experimental optimisation of various cultural conditions on urease activity for isolated Sporosarcina pasteurii strains and evaluation of their biocement potentials”, Ecological Engineering, 2017, 109, 65-75.

Puri VK, “Geotechnical aspects of oil-contaminated sands”, Soil and Sediment Contamination, 2000, 9, 359-374.

Qabany A, Soga K, “Effect of chemical treatment used in MICP on engineering properties of cemented soils”, Géotechnique, 2013, 63, 331.

Ratnaweera P, Meegoda JN, “Shear strength and stress-strain behavior of contaminated soils”, 2005.

Shibuichi S, Yamamoto T, Onda T, Tsujii K, “Super water-and oil-repellent surfaces resulting from fractal structure”, Journal of Colloid and Interface Science, 1998, 28, 287-294.

Shin EC, Omar MT, Tahmaz AA, Das BM, Atalar C, “Shear strength and hydraulic conductivity of oil-contaminated sand”, Proceedings of Environmental Geotechnics IV (ICEG), 2002 Rio de Janeiro, Brazil, 1998, 11-15.

Simpson B, Tatsuoka F, “Geotechnics: the next 60 years”, Géotechnique, 2008, 58, 357-368.

Singh SK, Srivastava RK, John S, “Settlement characteristics of clayey soils contaminated with petroleum hydrocarbons”, Soil & sediment contamination, 2008, 17, 290-300.

Stevens J, “Unified soil classification system”, Civil Engineering, ASCE, 1982, 52, 61-62.

Tabarsa A, Latifi N, Meehan CL, Manahiloh KN, “Laboratory investigation and field evaluation of loess improvement using nanoclay- A sustainable material for construction”, Construction and Building Materials, 2018, 158, 454-463.

Udiwal KH, Patel VM, “Restoration of oil contaminated soil by bioremediation for ground water management and environment protection”, International Journal of Chemical Environmental and Pharmaceutical Research, 2010, 1, 17-26.

Van Paassen LA, Ghose R, Van Der Linden TJ, Van Der Star WR, Van Loosdrecht MC, “Quantifying biomediated ground improvement by ureolysis: large-scale biogrout experiment”, Journal of Geotechnical and Geoenvironmental Engineering, 2010, 136, 1721-1728.

Vankova N, Tcholakova S, Denkov ND, Ivanov IB, Vulchev VD, Danner T, “Emulsification in turbulent flow: Mean and maximum drop diameters in inertial and viscous regimes”, Journal of Colloid and Interface Science, 2007, 312, 363-380.

Whiffin VS, Van Paassen LA, Harkes MP, “Microbial carbonate precipitation as a soil improvement technique”, Geomicrobiology Journal, 2007, 24, 417-423.

Yan N, Gray MR, Masliyah JH, “On water-in-oil emulsions stabilized by fine solids”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2001, 193, 97-107.

Yasuhara H, Hayashi K, Okamura M, “Evolution in mechanical and hydraulic properties of calcite-cemented sand mediated by biocatalyst”, In Geo-Frontiers 2011: Advances in Geotechnical Engineering, 2011, 3984-3992.

Zamani A, Montoya BM, “Permeability Reduction Due to Microbial Induced Calcite Precipitation in Sand”, Geo-Chicago, 2016, 103-94.

Zhang G, “Soil nanoparticles and their influence on engineering properties of soils”, In Advances in Measurement and Modeling of Soil Behavior, 2007, 13-1.

Zhao Q, Li L, Li C, Li M, Amini F, Zhang H, “Factors affecting improvement of engineering properties of MICP-treated soil catalyzed by bacteria and urease”, Journal of Materials in Civil Engineering, 2014, 26, 04014094.

Zomorodian SA, Shabnam M, Armina S, O'kelly BC, “Strength enhancement of clean and kerosene-contaminated sandy lean clay using nanoclay and nanosilica as additives”, Applied Clay Science, 2017, 140, 140-147.