بررسی عددی جریان و انتقال گرما در گردآور خورشیدی سهموی SEGS LS2 تحت شرایط ورودی پله ای- سینوسی

[1]  Mostafaeipour A., Zarezade M., Goudarzi H., Rezaei-Shouroki M., & Qolipour M. (2017). Investigating the factors on using the solar water heaters for dry arid regions: A case study. Renewable and Sustainable Energy Reviews, 78, 157-166.‏

[2]  Dudley V., Premkumaran S. P., Kumar S. R., & Rajapandian R. (2017). SOLAR WATER HEATER THROUGH ALUMINIUM FOIL-A REVIEW. International Research Journal of Engineering and Technology (IRJET), 4(10), 2033-2037.‏

[3]  Moss T. A., & Brosseau D. A. (2005). Final test results for the Schott HCE on a LS-2 collector (No. SAND2005-4034). Sandia National Laboratories.‏

[4]  Karimi Sadaghiyani O., Mehdi Pesteei S., & Mirzaee I. (2014). Numerical study on heat transfer enhancement and friction factor of LS-2 parabolic solar collector. Journal of Thermal Science and Engineering Applications, 6(1).‏

[5]  Cheng Z. D., He Y. L., Cui F. Q., Xu R. J., & Tao Y. B. (2012). Numerical simulation of a parabolic trough solar collector with nonuniform solar flux conditions by coupling FVM and MCRT method. Solar Energy, 86(6), 1770-1784.‏

[6]  Mwesigye A., Bello-Ochende T., & Meyer J. P. (2015). Multi-objective and thermodynamic optimization of a parabolic trough receiver with perforated plate inserts. Applied Thermal Engineering, 77, 42-56.‏

[7]  Wang Y., Liu Q., Lei J., & Jin H. (2015). Performance analysis of a parabolic trough solar collector with non-uniform solar flux conditions. International Journal of Heat and Mass Transfer, 82, 236-249.‏

[8]  Jafar K. S. J., & Sivaraman B. (2015). Thermal performance of solar parabolic trough collector using nanofluids and the absorber with nail twisted tapes inserts. International Energy Journal, 14(4).‏

[9]  Turkyilmazoglu M. (2015). Anomalous heat transfer enhancement by slip due to nanofluids in circular concentric pipes. International Journal of Heat and Mass Transfer, 85, 609-614.‏

[10]             Kasaeian A., Daviran S., Azarian R. D., & Rashidi A. (2015). Performance evaluation and nanofluid using capability study of a solar parabolic trough collector. Energy conversion and management, 89, 368-375.‏

[11]             Moghari R. M., Akbarinia A., Shariat M., Talebi F., & Laur, R. (2011). Two phase mixed convection Al2O3–water nanofluid flow in an annulus. International Journal of Multiphase Flow, 37(6), 585-595.‏

[12]             Sokhansefat T., Kasaeian A. B., & Kowsary F. (2014). Heat transfer enhancement in parabolic trough collector tube using Al2O3/synthetic oil nanofluid. Renewable and Sustainable Energy Reviews, 33, 636-644.‏

[13]             Gambit User Guide, 2005. Fluent Inc., Lebanon, New Hampshire

[14]             Fluent 6.2 User Guide, 2005. Fluent Inc., Lebanon, New Hampshire

[15]             Naeeni N., & Yaghoubi M. (2007). Analysis of wind flow around a parabolic collector (2) heat transfer from receiver tube. Renewable Energy, 32(8), 1259-1272.‏