Condition monitoring of slider crank mechanism of a linear servo mechanism using encoder sensor signal harmonics | ||
| مهندسی مکانیک دانشگاه تبریز | ||
| Article 12, Volume 50, Issue 1 - Serial Number 90, March 2019, Pages 101-108 PDF (981.26 K) | ||
| Document Type: Original Article | ||
| DOI: 10.22034/jmeut.2020.9764 | ||
| Authors | ||
| Mahdi Danesh* 1; Ali Akbar Mohammadi2 | ||
| 1Department of Mechanical Engineering, Buein Zahra Technical University, Buein Zahra, Iran | ||
| 2Islamic Azad University, East Tehran Branch, Tehran, Iran | ||
| References | ||
|
[1] Sang Y., Karayaka H. B., Yan Y., Zhang J. Z., Bogucki D. and Yu Y., A Rule-Based Phase Control Methodology for a Slider-Crank Wave Energy Converter Power Take-Off System, International jounal of marine energy, Vol. 19, PP. 124-144,2017. [2] Ha J. L., Fong R. F., Chen K.Y. and Hsien S. C., Dynamic modeling and identification of a slider-crank mechanism, Journal of Sound and Vibration, Vol.289, pp.1019–1044, 2006. [3] Erkaya S. and Uzmay I., Effects of balancing and link flexibility on dynamics of a planar mechanism having joint clearance, Scientia Iranica, Vol 19, No. 3, PP. 483-490 2012. [4] Erkaya S., Dogan S. and Ulus S., Effects of joint clearance on the dynamics of a partly compliant mechanism. Numerical and experimental studies, Mechanism and Machine Theory, Vol. 88, PP. 125-140, 2015. [5] Simionescu A., Optimum Synthesis of Oscillating Slide Actuators for Mechatronic Applications, Journal of computation design and engineering, Vol. 5, No. 2, pp. 215-231, 2018. [6] Varedi S.M., Daniali H.M., Dardel M. and Fathi A., Optimal dynamic design of a planar slider-crank mechanism with a joint clearance, Mechanism and Machine Theory, Vol. 86, PP. 191–200, 2015. [7] Aslambakhsh M., Analysis of the load torque effect on the dynamic behavior of linear and servomechanism, Yamahdi publications, pp10-15, 2010(In Persian). [8] Ahmad S.M.i, Design of linear servomechanism for enhancement of an existing PWM system, M.S Thesis, Electrical engineering faculty, K.N Toosi university of technology, Tehran, 2003(In Persian). [9] Ahmadi B., Servomotors and encoders automation motion control complete reference, Aylar publications pp160-167, 2014(In Persian). [10] Danesh M., Khalili K., Tool wear condition monitoring using time frequency marginal integral of motor current signal, Tarbitmodarres mechanical engineering journal, No.16, pp.183, 2014(In Persian). [11] Akbari A., Danesh M., Khalili K., A method based on spindle motor current harmonic distortion measurements for tool wear monitoring, Journal of the Brazilian Society of Mechanical Sciences and Engineering,Vol. 39, No. 12, pp 5049–5055, 2017. | ||
|
Statistics Article View: 400 PDF Download: 444 |
||