شبیه سازی عددی و مطالعه پارامتری انتقال گرمای جابجایی در یک چاه گرمایی میکروکانالی با پره های پین شده بیضوی

[1]       Seyf H.R., Layeghi M., Numerical analysis of convective heat transfer from an elliptic pin fin heat sink with and without metal foam insert. J. of Heat Transfer, 132: 1-9, 2010.

[2]       Knight R.W., Goodling J.S., Hall D.J., Optimal thermal design of forced convection heat sinks – analytical. ASMEJournal of Electron. Packaging, 113: 313–321, 1991.

[3]       Bejan A., Morega A.M., Optimal arrays of pin fins and plate fins in laminar forced convection. ASME Journal of Heat Transfer, 115: 75–81, 1993.

[4]       Lee D.Y., Vafai K., Comparative analysis of jet impingement and microchannel cooling for high heat flux applications, Int J Heat Mass Transf , 42: 1555–1568, 1999.

[5]       Mudawar I., Sung-Min K., Analytical heat diffusion models for different micro-channel heat sink cross-sectional geometries. Int J Heat Mass Transf, 53 (19–20(: 4002– 4016, 2010.

[6]       Zulk ., Koneke T., Mertens A., Analytical modeling of plate fin heat sinks for natural convection cooling in power electronics, Vehicle Power and Propulsion Conference, China, 2016.

[7]       Chen H., Wang C., Analytical analysis and experimental verification of interleaved parallelogram heat sink. Appl Therm Eng, 112: 739-749, 2017.

[8]       Babaelahi M., Eshraghi H., Optimum analytical design of medical heat sink with convex parabolic fin including variable thermal conductivity and mass transfer. Extreme Mechanics Letters, (accepted), 2017.

[9]       Go JS, Kim SJ, Lim G, Yun H, Lee J, Song I, Pak YE, Heat Transfer Enhancement Using Flow-induced Vibration of a Micro fin Array. Sens Actuators A Phys 90: 232-239, 2001.

[10]    Prasher R.S., Dirner J., Chang I.-Y., Myers A., Chau D., He D., Prstic S., Pfefferkorn F., Nusselt Number and Friction Factor of Staggered Arrays of Low Aspect Ratio Micro pin-Fins Under Cross Flow For Water as Fluid. J. of Heat Transfer, 129: 141-153, 2007.

[11]    Chiu H, Jang J, Yeh H, Wu M, The heat transfer characteristics of liquid cooling heat sink containing micro channels. Int J Heat Mass Transf, 54 (1–3): 34–42, 2011.

[12]    Shaalan M.R., Saleh M.A., Mesalhy O., Elsayed M.L., Thermo/fluid performance of a shielded heat sink.  Int J Therm Sci 60: 171–181, 2012.

[13]    Mousa MM, Mostafa AA, Air cooling of mini-channel heat sink in electronic devices. Journal of Electronics Cooling and Thermal Control, 10: 49-57, 2013.

[14]    Srikanth R., Balaji C., Experimental investigation on the heat transfer performance of a PCM based pin fin heat sink with discrete heating. Int J Therm Sci, 111: 183-203, 2017.

[15]    Jadhav S.V., Pawar P.M., Ronge B.P., Effect of pin-fin geometry on microchannel performance. Chem Prod Process Model, 20180016, 2018.

[16]    Ermagan H., Rafee R., Geometric optimization of an enhanced microchannel heat sink with superhydrophobic walls. Appl Therm Eng, 130, 384-394, 2018.

[17]    Ermagan H., Rafee R., Effect of pumping power on the thermal design of converging microchannels with superhydrophobic walls. Int J Therm Sci, 132, 104-116, 2018.

[18]    Shalchi-Tabrizi A., Seyf H.R., Analysis of entropy generation and convective heat transfer of Al2O3 nanofluid flow in a tangential micro heat sink. Int J Heat Mass Transf, 55: 4366–4375, 2012.

[19]    Shafeie H, Abouali O, Jafarpur K, Ahmadi G, Numerical study of heat transfer performance of single-phase heat sinks with micro pin-fin structures. Appl Therm Eng 58 (1–2): 68–76, 2013.

[20]    Matsumoto N., Tomimura T., Koito Y., Heat Transfer characteristics of square micro pin fins under natural convection. Journal of Electronics Cooling and Thermal Control, 4: 56-59, 2014.

[21]    Riera S., Barrau J., Omri M., Fréchette LG, Rosell JI, Stepwise varying width microchannel cooling device for uniform wall temperature: Experimental and numerical study. Appl Therm Eng, 78: 30–38, 2015.

[22]    Zhao J., Huang S., Gong L., Huang Z., Numerical study and optimizing on micro square pin-fin heat sink for electronic cooling, Appl Therm Eng, 93: 1347–1359, 2016.

[23]    Jianxin Z., Lixia S., Modelling and numerical simulations of heat distribution for LED heat sink. Discrete Dyn Nat Soc, 3468246: 1-8, 2016.

[24]    Wen M., Yeh C., Numerical study of thermal performance of perforated circular pin fin heat sinks in forced convection. Heat Mass Transfer, 53 (6): 2031-2044, 2017.

[25]    Dhaidan N.S.,  Khodadadi J.M., Improved performance of latent heat energy storage systems utilizing high thermal conductivity fins: A review. Journal of Renewable and Sustainable Energy, 9(3), 2017.

[26]    Sundaram A.S., Bhaskaran A., Thermal modeling of thermosyphon integrated heat sink for CPU cooling. Journal of Electronics Cooling and Thermal Control, 15-21, 2011.

[27]    Kosar A, Peles Y, Thermal-Hydraulic Performance of MEMS-based Pin Fin Heat Sink. J. of Heat Transfer, 128 (2): 121-131, 2006.

[28]    H.H. Jasim, M.S. Söylemez, Thermal enhancement from pin fins by using elliptical perforations with different inclination angles. Heat Tran Asian Res, 47, 165-184, 2018.

[29]    Yang K., Chu W., Chen I., Wang C., A comparative study of the airside performance of heat sinks having pin fin configurations. Int J Heat Mass Transf, 50: 4661–4667, 2007.

[30]   ANSYS Fluent Theory Guide, Release 17.0, ANSYS, Inc., 2016.