مطالعه عددی جریان مغشوش و انتقال گرما نانوسیال آب- مس عبوری از روی موانع ناهمسان واقع در ناحیه ابتدائی سطح

[1] Nasiruddind Kamran M. H. S., Heat transfer augmentation in a heat exchanger tube using a baffle,  InternationalJournal of Heat and Fluid Flow, Vol. 28, No.2, pp. 318-328, 2007.

[2] Promvonge P., Sripattanapipat S., Tamna S., Kwankao- meng S. and Thianpong C., Numerical investigation of laminarheat transfer in a square channel with 45° inclined baffles, International Communications in Heat and Mass Transfer,Vol. 37, No. 2, pp. 170-177, 2010.

[3] Nuntadusit C., PiyaI., Wae-hayee M. and Eiamsa-ard S., Heat transfer characteristics in a channel fitted with zigzag-cut baffles, Journal of Mechanical Science and Technology, Vol. 29, No. 6, pp. 2547-2554, 2015.

[4] Promvonge P., Sripattanapipat S. and Kwankaomeng S., Laminar periodic flow and heat transfer in square channel with 45^oinline baffles on two opposite walls, International Journal of Thermal Sciences, Vol. 49, No. 6, pp. 963-975, 2010.

[5] Jedsadaratanachai W., Suwannapan S. and Promvonge P., Numerical study of laminar heat transfer in baffled squarechannel with various pitches, Energy Procedia, Vol. 9, pp. 630-642, 2011.

[6] Sriromreun P., Thianpong C. and Promvonge P., Experimental and numerical study on heat transfer enhancement in a channel with Z-shaped baffles, International Communications in Heat and Mass Transfer., Vol.39, No. 7, pp. 945-952, 2012.

[7] Promvonge P., Heat transfer and pressure drop in a channel with multiple 60° V-baffles, International Communications in Heat and Mass Transfer,Vol. 37, No. 7, pp. 835–840, 2010.

[8] Manca O., Nardini S. and Ricci D., A numerical study of nanofluid forced convection in ribbed channels, Applied Thermal Engineering, Vol. 37, pp. 280-292, 2012.

[9] Mohammadi PirouzM., Farhadi M., Sedighi K., Nemati H. and Fattahi E., Lattice Boltzmann simulation of conjugate heat transfer in a rectangular channel with wall-mounted obstacles, Scientia Iranica B, Vol. 18, No. 2, pp. 213–221, 2011.

[10] Ryu D. N., Choi D. H. and Patel V. C., Analysis of turbulent flow in channels roughened by two-dimensional ribs andthree-dimensional blocks. Part II: Heat transfer, International Journal of Heat and Fluid Flow,Vol. 28, No. 5, pp. 1112–1124, 2007.

[11]Lu H., Zhao W.J., Zhang H.Q., Wang B., Wang X.L., Three-dimensional turbulent flow over cube-obstacles, Chinese Physics B, Vol. 26, No. 1, 2017.

[12]Ben Hamza S.,Ben Kalifa R.,MahjoubSaïd N., Bournot H., Le Palec G., Numerical study of sediment transport in turbulent two-phase flows around an obstacle, Applied Mathematical Modelling, Vol. 45, May 2017, pp. 97-122.

[13]De Marchis M.,Milici B., Napoli E., Solid sediment transport in turbulent channel flow over irregular rough boundaries, International Journal of Heat and Fluid Flow, Vol. 65, June 2017, pp. 114-126.

[14]Hou J., Vajdi Hokmabad B., Ghaemi S., Three-dimensional measurement of turbulent flow over a riblet surface,Experimental Thermal and Fluid Science, Vol. 85, July 2017, pp. 229-239.

[15]Segunda V.M., Ormiston S.J., Tachie M.F.,Experimental and numerical investigation of developing turbulent flow over a wavy wall in a horizontal channel,European Journal of Mechanics – B/Fluids, Vol. 68, March–April 2018, pp. 128-143.

[16] Mirmasoumi S., Behzadmehr A., Effect of nanoparticles mean diameter on mixed convection heat transfer of a nanofluid in a horizontal tube, International Journal of Heat and Fluid Flow, Vol. 29, No. 2, pp. 557–566, 2008.

[17] Pishkar I., Ghasemi B., Effect of nanoparticles on mixed convection heat transfer in a horizontal channel with heat source, modares mechanics journal,Vol. 12, No. 2, pp.95-108, 2012.

[18] Rostamani M., Hosseinizadeh S. F., Gorji M. and Khodadadi J. M., Numerical study of turbulent forced convection flow of nanofluids in a long horizontal duct considering variable properties,International Communications in Heat and Mass Transfer, Vol. 37, No. 10, pp. 1426–1431,2010.

[19] Mohammed H. A., Al-Shamani A. N. and Sheriff J. M., Thermal and hydraulic characteristics of turbulent nanofluids flow in a rib–groove channel, International Communications in Heat and Mass Transfer,Vol. 39, No. 10 , pp. 1584–1594, 2012.

[20] Yuan Z. X., Numerical study of periodically turbulent flow and heat transfer in a channel with transverse fin arrays, International Journal of Numerical Methods for Heat & Fluid Flow,Vol. 10, No. 8, pp. 842-861, 2000.

[21] Wolfshtiein M., The velocity and temperature distribution in one-dimensional flow with turbulence augmentation and pressure gradient, Int. J. Heat Mass transfer, Vol. 12,No. 3, pp. 301-318, 1969.

[22] Patankar S. V., Numerical Heat Transfer and FluidFlow, Hemisphere, Washington D. C., 1980.

[23] Santra A. K., Sen S., chakraborty N., Study of heat transfer due to laminar flow of copper-water nanoflouid through two isothermally heated parallel plates, International journal of thermal sciences, Vol. 48, No. 2, pp. 391-400, 2009.

[24] Khoshvaght-Aliabadi M., Hormozi F., Zamzamanian A., Experimental analysis of thermal–hydraulic performance of copper–water nanofluid flow in different plate-fin channels, Experimental thermal and fluid science, Vol. 52, pp. 248–258, 2014.

[25] Patel H. E., Pradeep T., Sundarrajan T., Dasgupta A., Dasgupta N. and Das S. K., A Micro-Convection Model for Thermal Conductivity of Nanofluid,Pramana - Journal of Physics, Vol. 65, No. 5, pp. 863-869, 2005.

[26] Xuan Y., Roetzel W., Conceptions  for  Heat  Transfer  Correlation  of  Nanofluids, International Journal of Heat and Mass Transfer, Vol. 43, No. 19, pp. 3701-3707, 2000.

[27] Rhie C.M., ChowW.L., Numerical Study of the Turbulent Flow past an Airfoil with Trailing Edge Separation, AIAA Journal, Vol. 21, pp. 1525–1532, 1983.

[28]FerzigerJ.H., Peric M.,Computational Methods for Fluid Dynamics, Springer, 1999.

[29] VersteegH.K., Malalasekera W., An Introduction to Computational FluidDynamics: The Finite Volume Method, Pearson Education Limited, 2007.

[30] Dhiman A.K., Chhabra R.P. and Eswaran V., Flow and heat transfer across a confined square cylinder in the steady flow regime: Effect of Peclet number, International Journal of Heat and Mass Transfer, Vol. 48, No. 21-22, pp. 4598–4614, 2005.