بررسی تجربی عملکرد سیستم سرمایش تبخیری دو‌مرحله‌ای

[1]  Fouda A. and Melikyan Z., A Simplified Model for Analysis of Heat and Mass Transfer in a Direct Evaporative Cooler, Applied Thermal Engineering, Vol. 31, pp. 932-936, 2011.

[2]  Wu J. M., Huang X. and Zhang H., Theoretical Analysis on Heat and Mass Transfer in a Direct Evaporative Cooler. Applied Thermal Engineering, Vol. 29, No.5, pp. 980-984, 2009.

[3]  Malli A., Seyf H. R, Layeghi M., Sharifian S. and Behravesh H., Investigating the Performance of Cellulosic Evaporative Cooling Pads. Energy Conversion and Management, Vol. 52, No.7, pp. 2598-2603, 2011.

[4]  Sheng C. and Agwu Nnanna A. C., Empirical Correlation of Cooling Efficiency and Transport Phenomena of Direct Evaporative Cooler. Applied Thermal Engineerin, Vol. 40, pp. 48-55, 2012.

[5]  Rawangkul R., Khedari J., Hirunlabh J. and Zeghmati B., Performance Analysis of a New Sustainable Evaporative Cooling pad Made From Coconut Coir. International Journal of Sustainable Engineering, Vol. 1, No.2, pp. 117-131, 2008.

[6]  Waleed A., Fadeel A. and Attalla M., Experimental Study on the Palm Fiber Using as a Direct Evaporative Cooler. International Journal of Mechanical & Mechatronics Engineering, Vol. 14, No.14, pp. 14-19, 2014.

[7]  Al-Sulaiman F., Evaluation of the Performance of Local Fibers in Evaporative Cooling. Energy Conversion and Management, Vol. 43, pp. 2263-2273, 2002.

[8]  Antonellis S. D., Joppolo C. M., Liberati P., Milani S. and Romano F., Modeling and Experimental Sudy of an Indirect Evaporative Cooler. Energy and Buildings, Vol. 142, No.1, pp. 147-157, 2017.

[9]  Maheshvari J. B., Al-Ragom F. and Suri R. K, Energy Saving Potential of an Indirect Evaporative Cooler. Applied Energy, Vol. 69, pp. 69-76, 2001.

[10]             Cui X., Chua K. J. and Yang W. M., Numerical Simulation of a Novel Energy-Efficient Dew-Point Evaporative Air Cooler. Strength of Materials, Vol. 136, pp. 979-988, 2014.

[11]             Riangvilaiku R. and Kumar S., An Experimental Study of a Novel Dew Point Evaporative Cooling System. Energy and Buildings, Vol. 42, pp. 637-644, 2010.

[12]             Riangvilaiku R. and Kumar S., Numerical Study of a Novel Dew Point Evaporative Cooling System. Energy and Buildings, Vol. 42, pp. 2241-2250, 2010.

[13]             Zhao X, Li J. M. and Riffat S. B., Numerical Study of a Novel Counter-Flow Heat and Mass Exchanger for Dew Point Evaporative Cooling. Applied Thermal Engineering, Vol. 28, pp. 1942-1951, 2008.

[14]             Alklaibi A. M., Experimental and Theoretical Investigation of Internal Two-Stage Evaporative Cooler. Energy Conversion and Management, Vol. 95, pp. 140-148, 2015.

[15]             El-Dessouky H., Ettouney H. and Al-Zeefari A., Performance Analysis of Two-Stage Evaporative Coolers. Chemical Engineering Journal, Vol. 10, pp. 255-266, 2004.

[16]             El-Dessouky H., Al-Hadad A. and AL-JUWAYHEL F., Thermal and Hydraulic Performance of Modified Two-Stage Evaporative Cooler . Renewable Energy, Vol. 7, No.2, pp. 165-176, 1996.

[17]             Jain D., Development and Testing of Two-Stage Evaporative Cooler. Building and Environment, Vol. 42, pp. 2549-2554, 2007.

[18]             Kulkarni R. K. and Rajput S. P. S., Performance Evaluation of Two Stage Indirect/Direct Evaporative Cooler With Alternative Shapes and Cooling Media in Direct Stage. International Journal of Applied Engineering Research, Vol. 1, No.4, pp. 800-812, 2011.

[19]             Al-Juwayhel F. I., Al-haddad A. A., Shaban H. I. and El-Desouky H. T. A., Experimental Investigation of The Performance of Two-Stage Evaporative Coolers. Heat Transfer Engineerin, Vol. 18, No.2, pp. 21-33, 1997.

[20]             Wu J. M., Huang X. and Zhang H., Numerical Investigation on Ihe Heat and Mass Transfer in a Direct Evaporative Cooler. Applied Thermal Engineering, Vol. 29, pp. 195-201, 2009.