تحلیل تجربی و عددی اثر همسانگردی و ناهمسانگردی ورق فلزی بر فرآیند شکل‌دهی استوانه برنجی

[1] Bača J., Bilík J., Technology of forming process, STU, Bratislava, 2000.

[2] Vin Callcut. Brasses Properties and Application. CDA Publication No. 117, 1996.

[3] El-Danaf E., Kalidindi S.R., Dohert R.D., Influence of stacking fault energy and grain size on deformation twinning in low SFE FCC metals, Metall. Mater. Trans, 1999.

[4] Baudin T., Etter A.L., Penelle R., Annealing twin formation and recrystallization study of cold-drawn copper wires from EBSD measurements, Mater. Charact, 2007.

[5] Humphereys F.J., Hatherly M., Recrystallization and Related Annealing Phenomena, second ed., Elsevier Ltd., Amsterdam, 2004.

[6] Ragab M.S., Orban H.Z., Effect of ironing on the residual stresses in deep drawn cups, Journal of Materials Processing Technology, 2000.

[7] Lange K., Bruckner L., Deformation induced residual stresses and stress corrosion in deep drawn components of brass materials, Transaction of NAMRI/SME, 1990.

[8] William F., Hosford, Robert M., Caddell, Metal Forming, 3^rd Edition. Prentice Hall, 2007.

[9] ASM Metals Handbook, Vol14.

[10] Hall E. O., Proc. Phys. Soc. London, 1951.

[11] Petch N. J., Iron Steel Inst. London, 1953.

[12] Meyers M. A., Chawla K. K., Mechanical Behavior of Materials, prentice Hall, New Jersey, 1999.

[13] Avitzur B., Ironing with unlimited reduction, Proc. 18th Machine Tool Design and Res. Conf., McMillan, London, 1977.

[14] Marciniak Z., Duncan JL., Hu SJ., Mechanics of sheet metal forming. 2nd ed. Butterworth Heinemann, 2002.