تحلیل تجربی رفتار فیزیکی/مکانیکی روکش شفاف نانو کامپوزیتی از جنس پلی‌یورتان/ نانو ذرات آلومینا

[1] Khudyakov I. V., ‌ Zopf D. R., and Turro N. J., Polyurethane nanocomposites, Designed Monomers and Polymers, Vol. 12, No.4, pp. 279-290, 2009.

[2] Sen S., and Nugay N.,Uncured and cured state properties of fly ash filled unsaturated polyester composites”, Applied Polymer Science, Vol. 77, No. 5, pp. 1128-1136, 2000.

[3] Park J.-J., Yoon K.-G., and Lee J.-Y., Thermal and Mechanical Properties of Epoxy/Micro- and Nano- Mixed Silica Composites or Insulation Materials of Heavy Electric Equipment, Transactions on Electrical and Electronic Materials, Vol.12, No.3, pp. 98-101, 2011.

[4] Petrovic Z. S., Javni I., and Waddon A., Applied Polymer Science, vol. 76, pp. 133-151, 2000.

[5] Choi  J. W., Kim  S. H., , and Kim  Y. J., Synthesis of chain-extended organifier and properties of polyurethane/clay nanocomposite, Polymer, Vol. 45, pp. 6045-6057, 2004.

[6] Pattanayak A., and Jana S. C., Properties of bulk-polymerized thermoplastic polyurethane nanocompoites, Polymer, Vol. 46, pp. 3394-3406, 2005.

[7] Cheng A., Wu S., Jiang D., Wu F., and Shen J.,Study of elastomeric polyurethane nanocomposites prepared from grafted organic-montmorillonite, Colloid Polymer Science, Vol. 284, pp. 1057-1061, 2006.

[8] Song, H.-J., Zhang Z.-Z., and Men X.-H., Surface-modified carbon nanotubes and the effect of their addition on the tribological behavior of a polyurethane coating, European Polymer Journal, Vol. 43, No. 10, pp. 4092-4102, 2007.

[9] Palimi M. J., Rostami M., Mahdavian M., and Ramezanzadeh B., Surface modification of Cr2O3nanoparticles with 3-amino propyltrimethoxy silane (APTMS). Part 1: Studying the mechanicalproperties of polyurethane/Cr₂O₃ nanocomposites’, Progress in Organic Coatings, Vol. 77, pp. 1663-1673, 2014.

[10] Palimi M. J., Rostami M., Mahdavian M., and Ramezanzadeh B., Surface modification of Fe2O3nanoparticles with 3-aminopropyltrimethoxysilane (APTMS): An attempt to investigate surface treatment on surface chemistry and mechanical properties of polyurethane/Fe₂O₃ nanocomposites, Applied Surface Science, Vol. 320, pp. 60-72, 2014.

[11] Ramezanzadeh B., Ghasemi E., Mahdavian M., Changizi E., and Mohamadzadeh Moghadam M. H., Characterization of covalently-grafted polyisocyanate chains on to graphene oxide for polyurethane composites with improved mechanical properties, Chemical Engineering Journal, Vol. 281, pp. 869-883, 2015.

[12] Javidparvar A. A., Ramezanzadeh B., and Ghasemi E., Effects of surface morphology and treatment of iron oxide nanoparticles on the mechanical properties of an epoxy coating, Progress in Organic Coatings, Vol. 90, pp. 10-20, 2016.

[13] Ramezanzadeha B., Moradian S., Khosravi A., and Tahmasebi N., Studying the role of polysiloxane additives and nano-SiO2 on the mechanical properties of a typical acrylic/melamine clear coat, Progress in Organic Coatings, Vol. 72, No. 4, pp. 621-631, 2011.

[14] Ramezanzadeh B., and Attar M. M., Characterization of the fracture behavior and viscoelastic properties of epoxy-polyamide coating reinforced with nanometer and micrometer sized ZnO Particles, Progress in Organic Coatings, Vol. 71, pp. 242-249, 2011.

[15] Czichos, H., Saito T., and Smith L.R., Springer Handbook of Materials Measurement Methods. Technology & Engineering, pp. 303-304, 2006.

[16] Swain S., Sharma R. A., Bhattacharya S., and Chaudhari L., Effects of Nano-silica/Nano-alumina on Mechanical and Physical Properties of Polyurethane Composites and Coatings, Transactions on Electrical and Electronic Materials, Vol. 14, No. 1, pp. 1-8, 2013.

]17 [جولازاده م.، نوارچیان ا. ح.، و صادقی ف.، مروری بر فرایند نانو کامپوزیت‌های پلی‌یورتان، خاک رس و خواص آن، ماهنامه علمی-ترویجی فرآیند نو, سال 3، شماره 16، صفحه 19-1، 1387.

[18] Skaja, A., Fernando D., and Croll S., “Mechanical property changes and degradation during accelerated weathering of polyester-urethane coatings, Journal of Coatings Technology Research, Vol.3 No. 1, pp. 41-51, 2006.