Parametric Study and Formulation of Scfs in Axially Loaded Multi-Planar Tubular XT-Joints Reinforced with Internal Ring Stiffeners

Ahmadi H, Kouhi A, “Stress concentration factors of multi-planar tubular XT-joints subjected to out-of-plane bending moments”, Applied Ocean Research, 2020, 96, 102058.

Ahmadi H, Lotfollahi-Yaghin MA, Aminfar MH, “Distribution of weld toe stress concentration factors on the central brace in two-planar CHS DKT-connections of steel offshore structures”, Thin-Walled Structures, 2011a, 49, 1225-1236.

Ahmadi H, Lotfollahi-Yaghin MA, Aminfar MH, “Effect of stress concentration factors on the structural integrity assessment of multi-planar offshore tubular DKT-joints based on the fracture mechanics fatigue reliability approach”, Ocean Engineering, 2011b, 38, 1883-1893.

Ahmadi H, Lotfollahi-Yaghin MA, Aminfar MH, “Geometrical effect on SCF distribution in uni-planar tubular DKT-joints under axial loads”, Journal of Constructional Steel Research, 2011c, 67, 1282-1291.

Ahmadi H, Lotfollahi-Yaghin MA, Aminfar MH, “The development of fatigue design formulas for the outer brace SCFs in offshore three-planar tubular KT-joints”, Thin-Walled Structures, 2012a, 58, 67-78.

Ahmadi H, Lotfollahi-Yaghin MA, Shao YB, Aminfar MH, “Parametric study and formulation of outer-brace geometric stress concentration factors in internally ring-stiffened tubular KT-joints of offshore structures”, Applied Ocean Research, 2012b, 38, 74-91.

Ahmadi H, Lotfollahi-Yaghin MA, Shao YB, “Chord-side SCF distribution of central brace in internally ring-stiffened tubular KT-joints: A geometrically parametric study”, Thin-Walled Structures, 2013, 70, 93-105.

Ahmadi H, Lotfollahi-Yaghin MA, “A probability distribution model for stress concentration factors in multi-planar tubular DKT-joints of steel offshore structures”, Applied Ocean Research, 2012a, 34, 21-32.

Ahmadi H, Lotfollahi-Yaghin MA, “Effect of SCFs on S–N based fatigue reliability of multi-planar tubular DKT-joints of offshore jacket-type structures”, Ships and Offshore Structures, 2013, 8, 55-72.

Ahmadi H, Lotfollahi-Yaghin MA, “Geometrically parametric study of central brace SCFs in offshore three-planar tubular KT-joints”, Journal of Constructional Steel Research, 2012b, 71, 149-161.

Ahmadi H, Lotfollahi-Yaghin MA, “Stress concentration due to in-plane bending (IPB) loads in ring-stiffened tubular KT-joints of offshore structures: Parametric study and design formulation”, Applied Ocean Research, 2015, 51, 54-66.   

Ahmadi H, Mousavi Nejad Benam MA, “Probabilistic analysis of SCFs in unstiffened gap tubular KT-joints of jacket structures under the OPB moment loads”, Advances in Structural Engineering, 2017, 20, 595-615.

Ahmadi H, Zavvar E, “Stress concentration factors induced by out-of-plane bending loads in ring-stiffened tubular KT-joints of jacket structures”, Thin-Walled Structures, 2015, 91, 82–95.

Ahmadi H, Zavvar E, “The effect of multi-planarity on the SCFs in offshore tubular KT-joints subjected to in-plane and out-of-plane bending loads”, Thin-Walled Structures, 2016, 106, 148-165.

Ahmadi H, “A probability distribution model for SCFs in internally ring-stiffened tubular KT-joints of offshore structures subjected to out-of-plane bending loads”, Ocean Engineering, 2016, 116, 184-199.

Ahmadi H. Mohammadi AH, Yeganeh A, Zavvar E, “Probabilistic analysis of stress concentration factors in tubular KT-joints reinforced with internal ring stiffeners under in-plane bending loads”, Thin-Walled Structures, 2016, 99, 58-75.

Ahmadi H, Mohammadi AH, Yeganeh A, “Probability density functions of SCFs in internally ring-stiffened tubular KT-joints of offshore structures subjected to axial load”, Thin-Walled Structures, 2015, 94, 485-499.

American Petroleum Institute (API), “Recommended practice for planning, designing and constructing fixed offshore platforms: Working stress design: RP 2A-WSD”, 21^st Edition, Errata and Supplement 3, Washington DC, US; 2007.

American Welding Society (AWS), “Structural welding code: AWS D 1.1”, Miami (FL), US; 2002.

Bomel Consulting Engineers, “Assessment of SCF equations using Shell/KSEPL finite element data”, C5970R02.01 REV C; 1994.

Cao JJ, Yang GJ, Packer JA, “FE mesh generation for circular tubular joints with or without cracks”, Proceedings of the 7^th International Offshore and Polar Engineering Conference, Honolulu (HI), US; 1997.

Chang E, Dover WD, “Parametric equations to predict stress distributions along the intersection of tubular X and DT-joints”, International Journal of Fatigue, 1999a, 21, 619-635.

Chang E, Dover WD, “Prediction of stress distributions along the intersection of tubular Y and T-joints”, International Journal of Fatigue, 1999b, 21, 361-381.

Chiew SP, Soh CK, Wu NW, “Experimental and numerical stress analyses of tubular XT-joint”, Journal of Structural Engineering, 1999, 125, 1239-1248.

Chiew SP, Soh CK, Wu NW, “General SCF design equations for steel multiplanar tubular XX-joints”, International Journal of Fatigue, 2000, 22, 283-293.

Efthymiou M, “Development of SCF formulae and generalized influence functions for use in fatigue analysis”, OTJ 88, Surrey, UK; 1988.

Gao F, Shao YB, Gho WM, “Stress and strain concentration factors of completely overlapped tubular joints under lap brace IPB load”, Journal of Constructional Steel Research, 2007, 63, 305-316.

Gao F, “Stress and strain concentrations of completely overlapped tubular joints under lap brace OPB load”, Thin-Walled Structures, 2006, 44, 861-871.

Gaspar B, Garbatov Y, Guedes Soares C, “Effect of weld shape imperfections on the structural hot-spot stress distribution”, Ships and Offshore Structures, 2011, 6 (1−2), 145-159.

Gho WM, Gao F, “Parametric equations for stress concentration factors in completely overlapped tubular K(N)-joints”, Journal of Constructional Steel Research, 2004, 60, 1761-1782.

Hellier AK, Connolly M, Dover WD, “Stress concentration factors for tubular Y and T-joints”, International Journal of Fatigue, 1990, 12, 13-23.

Hoon KH, Wong LK, Soh AK, “Experimental investigation of a doubler-plate reinforced tubular T-joint subjected to combined loadings”, Journal of Constructional Steel Research, 2001, 57, 1015-1039.

IIW-XV-E, “Recommended fatigue design procedure for welded hollow section joints, IIW Docs, XV-1035-99/XIII-1804-99”, International Institute of Welding, France; 1999.

Karamanos SA, Romeijn A, Wardenier J, “SCF equations in multi-planar welded tubular DT-joints including bending effects”, Marine Structures, 2002, 15, 157-173.

Karamanos SA, Romeijn A, Wardenier J, “Stress concentrations in multi-planar welded CHS XX-connections”, Journal of Constructional Steel Research, 1999, 50, 259-282.

Karamanos SA, Romeijn A, Wardenier J, “Stress concentrations in tubular gap K-joints: mechanics and fatigue design”, Engineering Structures, 2000, 22, 4-14.

Kuang JG, Potvin AB, Leick RD, “Stress concentration in tubular joints”, Proceedings of the Offshore Technology Conference, Paper OTC 2205, Houston (TX), US; 1975.

Lee MK, Wilmshurst SR, “Numerical modeling of CHS joints with multiplanar double-K configuration”, Journal of Constructional Steel Research, 1995, 32, 281-301.

Lee MMK, “Strength, stress and fracture analyses of offshore tubular joints using finite elements”, Journal of Constructional Steel Research, 1999, 51, 265-286.

Liu G, Zhao X, Huang Y, “Prediction of stress distribution along the intersection of tubular T-joints by a novel structural stress approach”, International Journal of Fatigue, 2015, 80, 216-230.

Lotfollahi-Yaghin MA, Ahmadi H, “Effect of geometrical parameters on SCF distribution along the weld toe of tubular KT-joints under balanced axial loads”, International Journal of Fatigue, 2010, 32, 703-719.

Lotfollahi-Yaghin MA, Ahmadi H, “Geometric stress distribution along the weld toe of the outer brace in two-planar tubular DKT-joints: parametric study and deriving the SCF design equations”, Marine Structures, 2011, 24, 239-260.

Morgan MR, Lee MMK, “Parametric equations for distributions of stress concentration factors in tubular K-joints under out-of-plane moment loading”, International Journal of Fatigue, 1998a, 20, 449-461.

Morgan MR, Lee MMK, “Prediction of stress concentrations and degrees of bending in axially loaded tubular K-joints”, Journal of Constructional Steel Research, 1998b, 45 (1), 67-97.

Myers PT, Brennan FP, Dover WD, “The effect of rack/rib plate on the stress concentration factors in jack-up chords”, Marine Structures, 2001, 14, 485-505.

N’Diaye A, Hariri S, Pluvinage G, Azari Z, “Stress concentration factor analysis for notched welded tubular T-joints”, International Journal of Fatigue, 2007, 29, 1554-1570.

Nwosu DI, Swamidas ASJ, Munaswamy K, “Numerical stress analysis of internal ring-stiffened tubular T-joints”, Journal of Offshore Mechanics and Arctic Engineering, 1995, 117, 113-125.

Shao YB, Du ZF, Lie ST, “Prediction of hot spot stress distribution for tubular K-joints under basic loadings”, Journal of Constructional Steel Research, 2009, 65, 2011-2026.

Shao YB, “Fatigue behaviour of uni-planar CHS gap K-joints under axial and in-plane bending loads”, PhD Thesis, School of Civil & Environmental Engineering, Nanyang Technological University, Singapore; 2004.

Shao YB, “Geometrical effect on the stress distribution along weld toe for tubular T- and K-joints under axial loading”, Journal of Constructional Steel Research, 2007, 63, 1351-1360.

Shao YB, “Proposed equations of stress concentration factor (SCF) for gap tubular K-joints subjected to bending load”, International Journal of Space Structures, 2004, 19, 137-147.

Smedley P, Fisher P, “Stress concentration factors for simple tubular joints”, Proceedings of the International Offshore and Polar Engineering Conference (ISOPE), Edinburgh; 1991. p. 475-483.

Swanson Analysis Systems Inc., “ANSYS contact technology guide”, Canonsburg (PA), US; 2009.

UK Department of Energy (DoE), “Background notes to the fatigue guidance of offshore tubular joints”, UK DoE, London, UK; 1983.

UK Health and Safety Executive (HSE), “OTH 354: Stress concentration factors for simple tubular joints − assessment of existing and development of new parametric formulae”, UK HSE, London, UK; 1997.

UK Health and Safety Executive, “Offshore installations: guidance on design, construction and certification”, 3^rd amendment to 4^th edition, London, UK; 1995.

Underwater Engineering Group, “Design of tubular joints for offshore structures”, London (UK): UEG/CIRIA; 1985.

Wimpey Offshore, “In-service database for ring-stiffened tubular joints”, Report WOL 035/91; 1991.

Wingerde AM, Packer JA, Wardenier J, “Simplified SCF formulae and graphs for CHS and RHS K- and KK-connections”, Journal of Constructional Steel Research, 2001, 57, 221-252.

Woghiren CO, Brennan FP, “Weld toe stress concentrations in multi planar stiffened tubular KK Joints”, International Journal of Fatigue, 2009, 31, 164-172.

Xu F, Chen J, Jin W, “Experimental investigation of SCF distribution for thin-walled concrete-filled CHS joints under axial tension loading”, Thin-Walled Structures, 2015, 93, 149-157.

Yang J, Chen Y, Hu K, “Stress concentration factors of negative large eccentricity tubular N-joints under axial compressive loading in vertical brace”, Thin-Walled Structures, 2015, 96, 359-371.

Zhao XL, Herion S, Packer JA, Puthli R, Sedlacek G, Wardenier J, “Design guide for circular and rectangular hollow section joints under fatigue loading”, CIDECT Publication No. 8, Germany: TUV Verlag; 2000.