آمار
| تعداد نشریات | 44 |
| تعداد شماره‌ها | 1,303 |
| تعداد مقالات | 16,020 |
| تعداد مشاهده مقاله | 52,489,839 |
| تعداد دریافت فایل اصل مقاله | 15,217,411 |
An Efficient Metasurface-Based Wireless Power Transfer System for Implantable Medical Devices | ||
| مجله مهندسی برق دانشگاه تبریز | ||
| دوره 54، شماره 4 - شماره پیاپی 110، آذر 1403، صفحه 487-494 اصل مقاله (873.23 K) | ||
| نوع مقاله: علمی-پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22034/tjee.2024.57636.4671 | ||
| نویسندگان | ||
| سید ابوالفضل حسینی1؛ محمد یزدی* 2 | ||
| 1دانشکده مهندسی برق و کامپیوتر، دانشگاه صنعتی نوشیروانی بابل، بابل، ایران | ||
| 2گروه مخابرات، دانشکده مهندسی برق و کامپیوتر، دانشگاه صنعتی نوشیروانی بابل، بابل، ایران | ||
| چکیده | ||
| In this paper, by designing a double metasurface, an efficient wireless power transfer system is proposed for implementable medical applications. This system operates at 2.45 GHz in the medical frequency band and consists of two antennas, a transmitter, and a receiver, along with a double metasurface structure embedded between them. A circular patch antenna for the transmitting end and a small loop antenna on the receiving side are designed. To enhance the efficiency of the system, a double metasurface consisting of two arrays of hexagonal ring unit cells is located between the receiver and transmitter antennas. As the receiver antenna is designed for operation in a human body medium, the effects of antenna displacement as well as material uncertainty on the efficiency of total structure are investigated in which reasonable stability concerning these variations is observed. Finally, as this system is aimed to operate in the human body, the safety of this system has also been approved through the calculation of the specific absorption rate (SAR). The proposed wireless power transfer system can overcome the challenges of using implementable medical electronic devices such as battery-replacing surgeries. | ||
| کلیدواژه‌ها | ||
| Metasurface؛ Wireless power transfer؛ Implantable antenna | ||
| مراجع | ||
|
[1] Y. Zhou, C. Liu, and Y. Huang, “Wireless power transfer (WPT) for implanted medical application: A review”, Energies, vol. 13, no. 11, pp. 2837, 2020. [2] C. Xiao, D. Cheng, and K. Wei, “An LCC-C compensated wireless charging system for implantable cardiac pacemakers: Theory, experiment, and safety evaluation”, IEEE Transactions on Power Electronics, vol. 33, no. 6, pp. 4894-4905, 2017. [3] K. Agarwal, R. Jegadeesan, Y. Guo, N. V. Thakor “Wireless power transfer (WPT) strategies for implantable bioelectronics”, IEEE Reviews in Biomedical Engineering, vol. 10, pp. 136-161, 2017. [4] M.R. Usikalu1, S.A. Adewole1, J.A. Achuka1, T.A. Adagunodo1, T.J. Abodunrin1 and L.N. Obafemi. “Investigation into wireless power transfer (WPT) in the near field using induction technique”, in Journal of Physics, Conference Series, vol. 1299, no. 1, pp. 012047, 2019. [5] M. Wang, L. Ren, Y. Shi, W. Liu, H. R. Wang, “Analysis of a nonlinear magnetic Coupling Wireless power transfer (WPT) system”, Progress In Electromagnetics Research C, vol. 110, pp. 15-26, 2021. [6] Y. Wang, C. Zhao, and L. Zhang, “Adaptive High-Power Laser-Based Simultaneous Wireless Information and Power Transfer System With Current-Fed Boost MPPT Converter”. IEEE Photonics Journal, vol. 13, no. 4, pp. 1-11, 2021. [7] C.M. Song, S. Trinh-Van, S.H. Yi, J. Bae, Y. Yang, K.Y. Lee, K.C. Hwang, “Analysis of received power in RF wireless power transfer (WPT) system with array antennas”, IEEE Access, vol. 9, pp. 76315-76324, 2021. [8] B.J. DeLong, A. Kiourti, J.L. Volakis, “A radiating near-field patch rectenna for wireless power transfer (WPT) to medical implants at 2.4 GHz”, IEEE Journal of Electromagnetics, RF, and Microwaves in Medicine and Biology, vol. 2, no. 1, p. 64-69, 2018. [9] T.C. Beh, T. Imura, M. Kato, Y. Hori, “Basic study of improving efficiency of wireless power transfer (WPT) via magnetic resonance coupling based on impedance matching”, IEEE International Symposium on Industrial Electronics. pp. 2011-2016, 2010. [10] L. Chen, S. Liu; Y.C. Zhou; T.J Cui, “An optimizable circuit structure for high-efficiency wireless power transfer”, IEEE Transactions on Industrial Electronics, vol. 60, no. 1, pp. 339-349, 2011. [11] B. Wang, K.H. Teo, T. Nishino, W. Yerazunis, J. Barnwell, J. Zhang, “Experiments on wireless power transfer (WPT) with metamaterials”, Applied Physics Letters, vol. 98, no. 25, pp. 254101, 2011. [12] Y. Yang, L. Jing, B. Zheng, R. Hao, W. Yin, E. Li, C.M. Soukoulis, H. Chen, “Full‐polarization 3D metasurface cloak with preserved amplitude and phase”, Advanced Materials, vol. 28, no. 32, pp. 6866-6871, 2016. [13] Y. Cheng, F. Chen, H. Luo, “Triple-band perfect light absorber based on hybrid metasurface for sensing application”, Nanoscale research letters, vol. 15, no. 1, pp. 1-10, 2020. [14] J.B. Mueller, N.A. Rubin, R.C. Devlin, B. Grover, F. Capasso, “Metasurface polarization optics: independent phase control of arbitrary orthogonal states of polarization”, Physical Review Letters, vol. 118, no. 11, pp. 113901, 2017. [15] S.E. Hosseininejad, K. Rouhi, M. Neshat, A.C. Aparicio, S. Abadal, E. Alarcón, “Digital metasurface based on graphene: An application to beam steering in terahertz plasmonic antennas”. IEEE Transactions on Nanotechnology, vol. 18, pp. 734-746, 2019. [16] B. R. Rezvan, M. Yazdi, S.E. Hosseininejad, “A 2-bit programmable metasurface for dynamic beam steering applications”, Tabriz Journal of Electrical Engineering, vol. 51, no. 2, pp. 277-284, 2021. [17] R. Asgharian, B. Zakeri, M. Yazdi, S. Samadi “Design of Steerable Passive Reflect array Using Non-uniform Elements for main beam and Side Lobe Level improvement”, Tabriz Journal of Electrical Engineering, vol. 49, no. 3, pp. 985-993, 2019. [18] Z. Zhang, D. Wen, C. Zhang, M. Chen, W. Wang, S. Chen, and, X. Chen, “Multifunctional light sword metasurface lens”, ACS Photonics, vol. 5, no. 5, pp. 1794-1799, 2018. [19] M. Bozorgi, and, M. Rafaei-Booket, “Reconfigurable planar metasurface lens using TiO2: design and simulation”, Tabriz Journal of Electrical Engineering, vol. 52, no. 4, pp. 229-237, 2022. [20] X. Jiang, R.K. Pokharel, A. Barakat, K. Yoshitomi, “A multimode metamaterial for a compact and robust dual-band wireless power transfer (WPT) system”, Scientific Reports, vol. 11, no. 1, pp. 1-10. 2021. [21] P. Zhang, L. Li, X. Zhang, H. Liu, Y. Shi, “Design, measurement, and analysis of near-field focusing reflective metasurface for dual-polarization and multi-focus wireless power transfer”, IEEE Access, vol. 7, pp. 110387-110399. 2019. [22] N.M. Tran, M.M. Amri, J.H. Park, S.II. Hwang, D.I. Kim, K.W. Choi, “A novel coding metasurface for wireless power transfer (WPT) applications”. Energies, vol. 12, no. 23, pp. 4488. 2019. [23] L. Li, H. Liu, H. Zhang, and W. Xue, “Efficient wireless power transfer (WPT) system integrating with metasurface for biological applications”, IEEE Transactions on Industrial Electronics, vol. 65, no. 4, pp. 3230-3239, 2017. [24] R.K. Pokharel, A. Barakat, S. Alshhawy, K. Yoshitomi, C. Sarris, Wireless power transfer (WPT) system rigid to tissue characteristics using metamaterial inspired geometry for biomedical implant applications. Scientific Reports, vol. 11, no. 1, pp. 1-10, 2021. [25] M. Wang, H. Liu, P. Zhang, X. Zhang, H. Yang, G. Zhou, L. Li, “Broadband implantable antenna for wireless power transfer (WPT) in cardiac pacemaker applications”, IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology, vol. 5, no 1, pp. 2-8. 2020. [26] T. Shaw, G. Samanta, D. Mitra, B. Mandal, and, R. Augustine, “Design of metamaterial based efficient wireless power transfer system utilizing antenna topology for wearable devices”. Sensors, vol. 21, no. 10, 3448, (2021). [27] I. A. Shah, M. Zada, S. A. A. Shah, A. Basir, and H. Yoo, “Flexible metasurface-coupled efficient wireless power transfer system for implantable devices”, IEEE Transactions on Microwave Theory and Techniques. 2023. [28] http://www.cst.com/products/cstmws. [29] http://www.aonesoft.net/ansys/hfss.html. [30] Z. J. Yang, S. Q. Xiao, L. Zhu, B. Z. Wang, H. L. Tu, A circularly polarized implantable antenna for 2.4-GHz ISM band biomedical applications. IEEE Antennas and Wireless Propagation Letters, vol. 16, pp. 2554-2557, 2017. [31] T. Shaw, D. Mitra, “Metasurface‐based radiative near‐field wireless power transfer (WPT) system for implantable medical devices”. IET Microwaves, Antennas & Propagation, vol. 13, no. 12, pp. 1974-1982, 2019. [32] D.R. Smith, D.C. Vier, Th. Koschny, and C.M. Soukoulis, “Electromagnetic parameter retrieval from inhomogeneous metamaterials”, Physical Review E, vol. 71, no. 3, pp. 036617, 2005. [33] G. Gonzalez, “Analysis and design microwave transistor amplifiers”, 1997. [34] IEEE Recommended Practice for Measurements and Computations of Electric, Magnetic, and Electromagnetic Fields with Respect to Human Exposure to Such Fields, 0 Hz to 300 GHz," in IEEE Std C95.3-2021 (Revision of IEEE Std C95.3-2002 and IEEE Std C95.3.1-2010), vol., no., pp.1-240, 2021. | ||
|
آمار تعداد مشاهده مقاله: 154 تعداد دریافت فایل اصل مقاله: 52 |
||