بررسی ترکیب زیست‌توده‌های باگاس نیشکر و کاه برنج با مواد پیونددهنده‌ طبیعی بر خصوصیات مکانیکی و حرارتی پلت‌های سوختی

Adapa, P., Tabil, L., and Shoenau, G. (2009). Comparison characteristics of barley, canola and wheat straw. Biosystems Engineering, 104, 335-344.

APHA, "Standard methods for the examination of water and wastewater, 20^th ed", American Public Health Association 1998, Washington DC.

Atli, A., Candelier, K., and Alteyrac, J. (2018). Mechanical, thermal and biodegradable properties of bioplast-spruce green wood polymer composites. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 12(5), 226.

Chou, C.S., Lin, S.H., Peng, C.C., and Lu, W.C. (2009). The optimum conditions for preparing solid fuel briquette of rice straw by a piston-mold process using the Taguchi method. Fuel Process. Technol. 90 (7–8), 1041–1046.

Farsi, M., and Janpour, J. (2013). Cultivation and improvement of oyster mushrooms. Mashhad Jihade-daneshgahi publications, Mashhad, Iran (In Persian)

Garsia, R., Gil, M.V., Rubiera, F., and Perida, C. (2019). Pelletization of wood and alternative biomass blends for producing industrial quality pellets. Fuel, 251: 739-753.

Garsia-Maraver, A., Rodriguez, M.L., Serrano-Bernardo, F.,

Jamradloedluk, J., and Lertsatitthanakorn, C. (2017). Influence of mixing ratios and binder types on properties of biomass pellets. Energy Procida, 138, 1147-1152.

Harun, N.Y., and Afzal, M.T. (2016). Effect of particle size on mechanical properties of pellets made from biomass blends. Procedia Engineering, 148, 93-99.

Hills, D.J., and Roberts, D.W. 1981. Anaerobic digestion of dairy manure and field crop residues. Agricultural Wastes. 3(3): 179-89.

Ishii, K., and Furuichi, T. (2014). Influence of moisture content, particle size and forming temperature on productivity and quality of rice straw pellets. Waste Management, 34, 2621-2626.

Kaliyan, N., and Morey, R.V. (2010). Natural binders and solid bridge type binding mechanisms in briquettes and pellets made from corn Stover and switch grass. Bioresource Technology ,101, 1082-1090

Krohn K, Rao MS, Raman NV and Khalilullah M. (2001). HPTLC analysis of anti-inflammatory triterpenoids from Boswellia serrata Roxb. Phytochemical Analysis, 12: 374 – 6.

Liu, Z., Fei, B., Jiang, Z., Cai, Z., and Yu, Y. (2013). The properties of pellets from mixing bamboo and rice straw. Renewable Energy, 55, 1-5.

Liu, Zh., Quek, A., and Balasubramanian, R. (2014). Preparation and characterization of fuel pellets from woody biomass, agro-residue and their corresponding hydrochars. Applied Energy, 113, 1315-1322.

Mishra, R. K., and Mohanty, K. (2018). Pyrolysis kinetics and thermal behavior of waste sawdust biomass using thermogravimetric analysis. Bioresource Technology, 251, 63-74.

McMullen, J., Fasina, O., Wood, W., Feng, Y.C., and Mills, G. (2004). Physical characteristics of pellets from poultry litter. ASABE Paper No. 046005. St. Joseph, Michigan: American Society of Agricultural and Biological Engineers; 2004.

Pound, B., Done, F., and Preston, T. R., (1981). Biogas production from mixtures of cattle slurry and pressed sugar cane stalk, with and without urea. Trop anim prod. 6:1.

Pradhan, P., Mahajani, S. M., and Arora, A. (2018). Production and utilization of fuel pellets from biomass: A review. Fuel Processing Technology, 181, 215-232.

Puig-Arnavat, M., Shang, L., Sárossy, Z., Ahrenfeldt, J., and Henriksen, U.B. (2016). From a single pellet press to a bench scale pellet mill—Pelletizing six different biomass feedstock. Fuel Processing Technology, 142, 27-33.

Rezende, C.A., de Lima, M.A., Maziero, P., deAzevedo, E.R., Garcia, W., Polikarpov, I. (2011). Chemical and morphological characterization of sugarcane bagasse submitted to a delignification process for enhanced enzymatic digestibility. Biotechnol. Biofuels, 4, 54-62.

Rhen, C., Gref, R., and Wasterlund, M. (2005). Effects of raw material moisture content, densification pressure and temperature on some properties of Norway spruce pellets. Fuel Process Technology, 87,111-116.

Said, N., Abdel daiem, M.M., Garcia-Maraver, A., and Zamorano, M. (2015). Influence of densification parameters on quality properties for rice straw pellets. Fuel Processing Technology. 138, 56-65.

Shaw, M.D., Karunkaran, C., and Tabil, L.G. (2009). Physicochemical characteristics of densified untreated and steam exploded poplar wood and wheat straw grinds. Biosystems Engineering, 103,198-207.

Singh, A., Singh, N., and Bishnoi, N. R., (2010). Enzymatic hydrolysis of chemically pretreated rice straw by two indigenous fungal strains: a comparative study. Journal of Scientific and Industrial Research. 69: 232-237.

Taherzadeh, M.J., and Karimi, K. (2008). Pretreatment of lignocellulose waste to improve ethanol and biogas production: A Review. Int J. Mol. Sci.

Temmerman, M., Rabier, F., Jensen, P.D., Hartmann, H., and Böhm, T.  (2006). Comparative study of durability test methods for pellets and briquettes. Biomass and Bioenergy 30: 964-972.

Tsuchiya, Y., and Yoshida, T. (2017). Pelletization of brown coal and rice bran in Indonesia. Fuel Processing Technology, 156, 68-71.

Zuwala, J. (2012). Life cycle approach for energy and environmental analysis of biomass and coal co-firing in CHP plant with backpressure turbine. Journal of cleaner production, 35, 164-175.