بررسی اثر افزایش دما بر پدیده‌ پوسته شدن در قطعات بتنی پر مقاومت

Abaeian R, Pesaran Behbahani H, Jalali Moslem S, “Effects of high temperatures on mechanical behavior of high strength concrete reinforced with high performance synthetic macro polypropylene (HPP) fibres”, Construction and Building Materials, 2018, 165, 631-638. https://doi.org/10.1016/j.conbuildmat.2018.01.064

Abaqus “Abaqus Analysis Theory Manual”, Version 6.14, United Kingdom, 2014.

Abaqus-subroutine “Abaqus user subroutines, reference manual”, Dassault Systèmes. USA, 2010.

ACI 318 “Building Code Requirements for Reinforced Concrete”, Volume 2012, American Concrete Institute, US, 2012.

Ali MH, Dinkha YZ, Haido JH, “Mechanical properties and spalling at elevated temperature of high performance concrete made with reactive and waste inert powders”, Engineering Science and Technology, an International Journal, 2016. https://doi.org/10.1016/j.jestch.2016.12.004

ASTM E119 “Test method E119-01: standard methods of fire test of building construction and materials” Report no. E119-01, American Society for Testing and Materials, West Conshohocken, 2001.

Bahr O, Schaumann P, Bollen B, Bracke J, “Young’s modulus and Poisson’s ratio of concrete at high temperatures: Experimental investigations”, Materials and Design, 2013, 45, 421-429. https://doi.org/10.1016/j.matdes.2012.07.070

Behnam B, “Post-earthquake Fire Analysis in Urban Structures”, CRC Press Taylor & Francis Group, Edition 1, 2017.

Breugel K, Van.Veen CJ Braam CR, “Betonconstructies onder temperatuur”, en krimpvervormingen Betonpraktijkreeks, 2, 1998.

CEB-FIP “Model Code 2010”, Final draft Volume 1, Ernst & Sohn publishing house, Germany, 2012.

Consolazio GR, McVay MC, Rish JW, “Measurement and prediction of pore pressures in saturated cement mortar subjected to radiant heating”, ACI Materials Journal, 1998, 95 (5), 525-536. https://doi.org/10.14359/395

de Morais MVG, Pliya P, Noumowé A, Beaucour A, Ortola S, “Contribution to the explanation of the spalling of small specimen without any mechanical restraint exposed to high temperature”, Nuclear Engineering and Design, 2010, 240, 2655-2663. https://doi.org/10.1016/j.nucengdes.2010.04.041

Felicetti R, Lo Monte F, Pimienta P, “A new test method to study the influence of pore pressure on fracture behaviour of concrete during heating”, Cement and Concrete Research, 94, 2017, 13-23. https://doi.org/10.1016/j.cemconres.2017.01.002

Gales J, Bisby LA, MacDougall CC, NMacLean KJ, “Transient High Temperature Stress, Relaxation of prestressing tendons in unbonded construction”, Fire Safety Journal, 2009, 570-579. https://doi.org/10.1016/j.firesaf.2008.11.006

Gawin D, Pesavento F, Schrefer BA, “Modelling of deformations of high strength concrete at elevated temperatures”, Materials and Structures, Concrete Science and Engineering, 2004, 37, 218-236.

Heo YS, Sanjayan JG, Han CG, Han MC, “Critical parameters of nylon and other fibres for spalling protection of high strength concrete in fire”, Materials and Structures, 2011, 44, 599-610.

Iranian Building code “No. 2800 Standard”, Tehran, Iran: Edition 4, 2015.

Jianzhuang X, Gert K, “Study on concrete at high temperature in China-an overview”, Fire Safety Journal, 2004, 39, 89-103. https://doi.org/10.1016/S0379-7112(03)00093-6

Khaliq W, Waheed F, “Mechanical response and spalling sensitivity of air entrained high-strength concrete at elevated temperatures”, Construction and Building Materials, 2017, 150, 747-757. https://doi.org/10.1016/j.conbuildmat.2017.06.039

Khaliq W, Taimur, “Mechanical and  physical response of recycled aggregates high-strength concrete at elevated temperatures”, Fire Safety Journal, 2018, 96, 203-214. https://doi.org/10.1016/j.firesaf.2018.01.009

Khan MI, Lynsdale CJ, “Strength, permeability, and carbonation of high-performance concrete”, Cement and Concrete Research, 2002, 32, 123-131. https://doi.org/10.1016/S0008-8846(01)00641-X

Kodur VKR, McGrath R, “Fire endurance of high strength concrete columns”, Fire Technology, 2003, 39 (1), 73-87.

Li Y, Kang HT, Yang EH, “Influence of aggregate size and inclusion of polypropylene and steel fibers on the hot permeability of ultra-high performance concrete (UHPC) at elevated temperature”, Construction and Building Materials, 2018, 169, 629-637. https://doi.org/10.1016/j.conbuildmat.2018.01.105

Liu C, Liu Ch, Xu W, Zhang X, Lan Y, “A fractal-interpolation model for diagnosing spalling risk in concrete at elevated temperatures”, KSCE Journal of Civil Engineering, 2018, 22 (12), 5154-5163. https://doi.org/10.1007/s12205-018-0697-z

Lo Monte F, Felicetti R, Rossino C, “Fire spalling sensitivity of high-performance concrete in heated slabs under biaxial compressive loading”, Materials and Structures, 2019, 52 (14).

Matesova´ D, Bonen D, Shah SP, “Factors affecting the resistance of cementitious materials at high temperatures and medium heating rates”, Materials and Structures, 2006, 39, 455-469.

Mindeguia J, Pimienta P, Carré H, La Borderie C, “Experimental analysis of concrete spalling due to fire exposure”, European Journal of Environmental and Civil Engineering, 17 April 2013. https://doi.org/10.1080/19648189.2013.786245

Mindeguia JC, Pimienta P, Carré H, La Borderie C, “On the influence of aggregate nature on concrete behaviour at high temperature”, European Journal of Environmental and Civil Engineering, 2012, 16 (2), 236-253. https://doi.org/10.1016/j.cemconres.2011.01.005

Mohammed A, Al-Saadi NTK, Al-Mahaidi R, “Bond behaviour between NSM CFRP strips and concrete at high temperature using innovative high-strength self-compacting cementitious adhesive (IHSSC-CA) made with graphene oxide”, Construction and Building Materials, 2016, 127, 872-883. https://doi.org/10.1016/j.conbuildmat.2016.10.066

Mohd Ali AZ, Sanjayan J, Guerrieri M, “Performance of geopolymer high strength concrete wall panels and cylinders when exposed to a hydrocarbon fire”, Construction and Building Materials, 2017, 137, 195-207. https://doi.org/10.1016/j.conbuildmat.2017.01.099

Ozawa M, Morimoto H, “Effects of various fibres on high-temperature spalling in high-performance concrete”, Construction and Building Materials, 2014, 71, 83-92. https://doi.org/10.1016/j.conbuildmat.2014.07.068

L Phan, “Spalling and mechanical properties of high strength concrete at high temperature”, Concrete under Severe Conditions, Environment and Loading, 2007.

Raut NK, Kodur VKR, “Response of High-Strength Concrete Columns under Design Fire Exposure”, Journal of Structural Engineering @ ASCE, January 2011, 69-79. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000265

Shah S, Akashah F, Shafigh P, “Performance of high strength concrete subjected to elevated temperatures: a review”, Fire Techno, 2019, 55 (5), 1571-1597.

Thakre N, Rajput H, Saxena J, Mitangale H, “Comparative Study on Strength and Permeability of Pervious Concrete by Using Nylon and Polypropylene Fiber”, International Journal of Computing and Technology, 2014, 1 (4).

Thanaraj DP, Anand N, Prince Arulraj G, Zalok E, “Post-fire damage assessment and capacity based modeling of concrete exposed to elevated temperature”, International Journal of Damage Mechanic, 2020, 29 (5), 748-779. https://doi.org/10.1177/1056789519881484

Wang Y, Duan Y, Ma S, Huang Z, “Behaviour of continuous reinforced concrete floor slabs subjected to different compartment fires”, Engineering Structures, 197, 2019, 109445. https://doi.org/10.1016/j.engstruct.2019.109445

Xu Q, Chen L, Li X, Han C, Wang Y, Zhang Y, “Comparative experimental study of fire resistance of two-way restrained and unrestrained precast concrete composite slabs”, Fire Safety Journal, 118, December 2020, 103225. https://doi.org/10.1016/j.firesaf.2020.103225

Zeiml M, Leithner D, Lackner R, Manh HA, “How do polypropylene fibers improve the spalling behavior of in-situconcrete”, Cement and Concrete Research, 36, 2006, 929-942. https://doi.org/10.1016/j.cemconres.2005.12.018

Zhao J, “Fire-Induced Spalling Modeling of High-Performance Concrete”, Master of Science aan de Beijing University of Technology, China, 2012.

Zhao J, Zheng J, Peng G, Breugel KV, “Numerical analysis of heating rate effect on spalling of high-performance concrete under high temperature conditions”, Construction and Building Materials, 2017, 152, 456-466. https://doi.org/10.1016/j.conbuildmat.2017.07.023