بررسی اثر اعمال شیار محیطی در پوسته بر رفتار جریان و عملکرد یک کمپرسور چرخش معکوس

[1] Day I. J. Stall, surge, and 75 years of research. Journal of        Turbomachinery,138, No. 1. 2016.

[2] Epstein A. H. Ffowcs-Williams JE, and Greitzer E. M. Active Suppression of erodynamic Instabilities in Turbomachines, AIAA Journal of Propulsion and Power, 5, 204-211.‏ 1989.

[3] Paduano J.D., Greitzer E.M. and Epstein A.H., Compression system stability and active control, Annual review of fluid mechanics, 33, p.491. 2001.

 [4] Day I. J., Review of stall, surge and active control in axial compressors. ISABE93-7011. 1993.

 [5] Zhang H. G., Chu W. L., and Wu Y. H., Numerical investigation of the circumferential grooved casing treatment as well as analyzing the mechanism of improve stall margin, In New Trends in Fluid Mechanics Research, pp. 448-451. Springer, Berlin, Heidelberg, 2007.

[6] Yu Qing, Qiushi Li, and Ling Li, The experimental researches on improving operating stability of a single stage transonic fan, In Turbo Expo: Power for Land, Sea, and Air, Vol. 3610, pp. 1133-1139. 2002.

[7] Xu Wei, Tong Wang. and ChuanGang Gu., Performance of a centrifugal compressor with holed casing treatment in the large flowrate condition, Science China Technological Sciences 54, No. 9, pp. 2483-2492. 2011.

[8] Lu X., Zhu J. and Chu W., Numerical and experimental investigation of stepped tip gap effects on a subsonic axial-flow compressor rotor. Proceedings of the institution of mechanical engineers, part a: journal of power and energy, 219(8), pp.605-615. 2005.

[9] Koch C. C. Experimental evaluation of outer case blowing or bleeding of single stage axial flow compressor, part 6 Final report. No. NASA-CR-54592. 1970.

[10] Fujita, H. and Takata, H., A study on configurations of casing treatment for axial flow compressors. Bulletin of JSME, 27(230), pp.1675-1681. 1984.

 [11] Takata H., and Tsukuda Y., Stall margin improvement by casing treatment—its mechanism and effectiveness, pp.121-133. 1977.

[12] Gourdain Nicolas, and Francis Leboeuf, Unsteady simulation of an axial compressor stage with casing and blade passive treatments, 021013. 2009.

[13] Legras Guillaume, Gourdain N. and Isabelle Trebinjac. Numerical analysis of the tip leakage flow field in a transonic axial compressor with circumferential casing treatment, Journal of Thermal Science 19, No. 3, pp.198-205. 2010.

[14] Crook A. J., Edward M. Greitzer C. S. Tan. and Adamczyk J. J., Numerical simulation of compressor endwall and casing treatment flow phenomena, pp.501-512. 1993.

[15] Wilke I., and H-P Kau., A numerical investigation of the flow mechanisms in a HPC front stage with axial slots, In Turbo Expo: Power for Land, Sea, and Air, Vol. 36894, pp. 465-477. 2003.

[16] Lu, Xingen, Wuli Chu, Junqiang Zhu, and Yangfeng Zhang. "Numerical investigations of the coupled flow through a subsonic compressor rotor and axial skewed slot." 011001. 2009.

[17] Lu Jialing, Wuli Chu, and Yanhui Wu. "Investigation of skewed slot casing on transonic axial-flow fan stage." In Turbo Expo: Power for Land, Sea, and Air, Vol. 48883, pp. 133-144. 2009.

[18] Djeghri, Noureddine, Huu Duc Vo, and Hong Yu. "Parametric study for lossless casing treatment on a mixed-flow compressor rotor." In Turbo Expo: Power for Land, Sea, and Air, Vol. 56635, p. V02AT37A025. American Society of Mechanical Engineers, 2015.

[19] Du Juan and Joerg R. Seume, Design of casing treatment on a mixed-flow compressor, In Turbo Expo: Power for Land, Sea, and Air, Vol. 50787, p. V02AT39A045. American Society of Mechanical Engineers, 2017.

[20] Sri P.U. and Krishna J.D., Computational analysis of centrifugal compressor with grooves on casing. International Journal of Mechanical Engineering and Technology, 6(2), pp.01-09. 2015.

[21] Shivayogi A.K., Nagpurwala Q.H. and Deshpande M.D., Numerical studies on the effect of slotted casing treatment on the performance of a transonic axial flow compressor. SASTech-Technical Journal of RUAS, 8(2), pp.63-70. 2009.

[22] Alone, Dilipkumar B., Subramani Satish Kumar, Shobhavathy Thimmaiah, Janaki Rami Reddy Mudipalli, A. M. Pradeep, Srinivasan Ramamurthy and Venkat S. Iyengar, Performance characterization of the effect of axial positioning of bend skewed casing treatment retrofitted to a transonic axial flow compressor." In Turbo Expo: Power for Land, Sea, and Air, Vol. 45608, p. V02AT37A026. American Society of Mechanical Engineers, 2014.

[23] Hembera M., Kau H.P. and Johann E., 2008. Simulation of casing treatments of a transonic compressor stage. International Journal of Rotating Machinery, 2008.

[24] Dong, Xu, Xiaohua Liu, Dakun Sun, and Xiaofeng Sun. "Experimental investigation on SPS casing treatment with bias flow, Chinese Journal of Aeronautics 27, No. 6, pp.1352-1362. 2014.

[25] Yu W.W., Wang X.Y. and Sun X.F., Investigation on the Theoretical Model Combined with the Novel Casting Treatment with Rotating Stall. Hangkong Dongli Xuebao/Journal of Aerospace Power, 20(5), pp.873-881. 2005.

[26] Dong X., Liu X., Sun D. and Sun X., Experimental investigation on SPS casing treatment with bias flow. Chinese Journal of Aeronautics, 27(6), pp.1352-1362. 2014.

 [27] Hathaway Michael D. Passive endwall treatments for enhancing stability. No. ARL-TR-3878. 2007.

[28] Mao X., Liu B. and Zhao H., Numerical analysis of the circumferential grooves casing treatment in a counter-rotating axial flow compressor. Applied Thermal Engineering, 130, pp.29-39. 2018.

[29] Mao X., Liu B., Abdul R. and Zhao H., Numerical investigation into the effects of casing aspiration on the overall performance and flow unsteadiness in a counter-rotating axial flow compressor. Aerospace Science and Technology, 78, pp.671-681. 2018.

[30] Mao X. and Liu B., Investigation of the casing groove location effect for a large tip clearance in a counter-rotating axial flow compressor. Aerospace Science and Technology, 105, p.106059. 2020.

[31] Mao X., Liu B., Tang T. and Zhao H., The impact of casing groove location on the flow instability in a counter-rotating axial flow compressor. Aerospace Science and Technology, 76, pp.250-259. 2018.

[32] Pundhir D.S.,  Sharma P.B. and Chaudhary K.K., Effect of casing treatment on aerodynamic performance of a contrarotating axial compressor stage. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 204(1), pp.47-55. 1990.

[33] Pundhir D.S., A study of some factors affecting the effectiveness of casing treatment in a contra-rotating axial compressor stage. 1994.

[34] Heinrich Martin, Hossein Khaleghi. and Christian Friebe. Numerical Investigation of Circumferential Groove Casing Treatment on a Low Speed Contra-Rotating Fan., In Turbo Expo: Power for Land, Sea, and Air, Vol. 58547, p. V001T09A011. American Society of Mechanical Engineers, 2019.

[35] Day I. J., Active suppression of rotating stall and surge in axial compressors., In Turbo Expo: Power for Land, Sea, and Air, Vol. 78989, p. V001T01A035. American Society of Mechanical Engineers, 1991.

[36] Abbasi S., alizadeh M., Investigation of the effect of speed variations on the contra-rotating axial compressor stages. Sharif Journal of Mechanical Engineering, 36(2), pp.21-30. 2020.

[37] Tiwari, Madhur. Axial Compressor Design with Counter-Rotation and Variable RPM for Stall Mitigation., 2014.