Sustainable and Eco-Friendly Use of Clay Brick Waste as an Alumina-Silicate Base and Different Fillers for Geopolymer Brick Production

ASTM C62, Standard Specification for Building Brick. In.

Abbas R, Khereby MA, Ghorab HY, Elkhoshkhany N, "Preparation of geopolymer concrete using Egyptian kaolin clay and the study of its environmental effects and economic cost", Clean Technologies and Environmental Policy, 2020, 1-19. https://doi.org/10.1007/s10098-020-01811-4.

Ahmadi R, Souri B, Ebrahimi M, "Evaluation of wheat straw to insulate fired clay hollow bricks as a construction material", Journal of Cleaner Production, 2020, 254, 120043. https://doi.org/10.1016/j.jclepro.2020.120043.

Akhtar A, Sarmah AK, "Construction and demolition waste generation and properties of recycled aggregate concrete: a global perspective", Journal of Cleaner Production, 2018, 186, 262-281. https://doi.org/10.1016/j.jclepro.2018.03.085.

Allahverdi A, Najafi Kani E, "Construction wastes as raw materials for geopolymer binders", International Journal of Civil Engineering, 2009, 7 (3), 154-160.

Boutterin C, Davidovits Journal of Geopolymeric cross-linking (LTGS) and building materials. In: Geopolymer, 1988, 79-88.

Chindaprasirt P, Rattanasak U, "Fire-resistant geopolymer bricks synthesized from high-calcium fly ash with outdoor heat exposure", Clean Technologies and Environmental Policy, 2018, 20 (5), 1097-1103. https://doi.org/10.1007/s10098-018-1532-4.

Dagounaki C, Sikalidis C, Kassoli-Fournaraki A, Tsirambides A, "The influence of carbonates on the technological properties of an industrial red clay", Ind Ceram, 2008, 28, 181-187.

Dai Z, Wu Y, Hu L, Zhang W, Mao L, "Evaluating physical-mechanical properties and long periods environmental risk of fired clay bricks incorporated with electroplating sludge", Construction Building Materials, 2019, 227, 116716.https://doi.org/10.1016/j.conbuildmat.2019.116716.

Esa MR, Halog A, Rigamonti L, "Developing strategies for managing construction and demolition wastes in Malaysia based on the concept of circular economy", Journal of Material Cycles and Waste Management, 2017, 19 (3), 1144-1154. https://doi.org/10.1007/s10163-016-0516-x.

Fahmi A, Babaeian Amini A, Marabi Y, Majnouni-Toutakhane A, "Evaluation the Use of Stone Aggregates with Different Aggregates in Compressive Strength of Geopolymer Concrete by Environmental Assessment Approach Compared to Portland Concrete", Journal of Environmental Science and Technology, 2021. 10.22034/JEST.2021.51073.5003.

Fahmi A, Marabi Y, Zavaragh SR, Majnouni-Toutakhane A, "Effect of Curing Temperature on the Mechanical Strength of Alkali Activated Laterite Geopolymeric Samples", Journal of Engineering Research, 2021. https://doi.org/10.36909/jer.11627.

Gavali HR, Bras A, Ralegaonkar RV, "Cleaner construction of social housing infrastructure with load-bearing alkali-activated masonry", Clean Technologies and Environmental Policy, 2021, 1-16. https://doi.org/10.1007/s10098-021-02138-4.

Islam R, Nazifa TH, Yuniarto A, Uddin AS, Salmiati S, Shahid S, "An empirical study of construction and demolition waste generation and implication of recycling", Waste Management, 2019, 95, 10-21. https://doi.org/10.1016/j.wasman.2019.05.049.

Katebi H, Fahmi A, Kafil HS, Bonab MH, "Stabilization of calcareous sand dunes using phosphoric acid mulching liquid", Journal of Arid Environments, 2018, 148, 34-44. https://doi.org/10.1016/j.jaridenv.2017.09.011.

Khater HM, El Nagar AM, Ezzat M, "Optimization of alkali activated grog/ceramic wastes geopolymer bricks", Optimization, 2016, 5 (1).

Limami H, Manssouri I, Cherkaoui K, Khaldoun A, "Study of the suitability of unfired clay bricks with polymeric HDPE & PET wastes additives as a construction material", Journal of Building Engineering, 2020, 27, 100956. https://doi.org/10.1016/j.jobe.2019.100956.

Liu H, Zhang J, Li B, Zhou N, Xiao X, Li M, Zhu C, "Environmental behavior of construction and demolition waste as recycled aggregates for backfilling in mines: Leaching toxicity and surface subsidence studies", Journal of Hazardous Materials, 2020, 389, 121870. https://doi.org/10.1016/j.jhazmat.2019.121870.

Liu S, Zhu P, Li X, "Design approach for improving fire-resistance performance of tunnel lining based on sio 2 aerogel coating", Journal of Performance of Constructed Facilities, 2020, 34 (3), 04020031. https://doi.org/10.1061/(ASCE)CF.19435509.000143.

Mahmoodi O, Siad H, Lachemi M, Dadsetan S, Sahmaran M, "Optimization of brick waste-based geopolymer binders at ambient temperature and pre-targeted chemical parameters", Journal of Cleaner Production, 2020, 268, 122285. https://doi.org/10.1016/j.jclepro.2020.122285.

Mansourghanaei M, Biklaryan M, Mardookhpour A, "Evaluation of impact strength of heated slag geopolymer concrete", Journal of Civil and Environmental Engineering, 2021. 10.22034/JCEE.2021.46011.2034.

Mohajerani A, Suter D, Jeffrey-Bailey T, Song T, Arulrajah A, "Recycling waste materials in geopolymer concrete", Clean Technologies and Environmental Policy, 2019, 21 (3), 493-515. https://doi.org/10.1007/s10098-018-01660-2.

Mymrin V, Aibuldinov EK, Alekseev K, Avanci MA, Rolim PH, Catai RE, Carvalho KQ, "Sustainable material manufacturing from hazardous bauxite red mud in composites with clay slate waste and lime production waste", The International Journal of Advanced Manufacturing Technology, 2020, 111 (5), 1375-1385. https://doi.org/10.1007/s00170-020-06187-9.

Parathi S, Nagarajan P, Pallikkara SA, "Ecofriendly geopolymer concrete: a comprehensive review", Clean Technologies and Environmental Policy, 2021, 1-13. https://doi.org/10.1007/s10098-021-02085-0.

Quedou PG, Wirquin E, Bokhoree C, "A sustainable approach in using construction and demolition waste materials in concrete", World Journal of Engineering, 2021. https://doi.org/10.1108/WJE-05-2020-0161.

Reig L, Tashima MM, Borrachero M, Monzó J, Cheeseman C, Payá J, "Properties and microstructure of alkali-activated red clay brick waste", Construction Building Materials, 2013, 43, 98-106. https://doi.org/10.1016/j.conbuildmat.2013.01.031.

Shi C, Jiménez AF, Palomo A, "New cements for the 21st century: The pursuit of an alternative to Portland cement", Cement and concrete research, 2011, 41 (7), 750-763. https://doi.org/10.1016/j.cemconres.2011.03.016.

Silva R, de Brito J, Dhir R, "Use of recycled aggregates arising from construction and demolition waste in new construction applications", Journal of Cleaner Production, 2019, 236, 117629. https://doi.org/10.1016/j.jclepro.2019.117629.

Singh PS, Trigg M, Burgar I, Bastow T, "Geopolymer formation processes at room temperature studied by 29Si and 27Al MAS-NMR", Materials Science and Engineering, A, 2005, 396 (1-2), 392-402. https://doi.org/10.1016/j.msea.2005.02.002.

Sormunen P, Kärki T, "Recycled construction and demolition waste as a possible source of materials for composite manufacturing", Journal of Building Engineering, 2019, 24, 100742. https://doi.org/10.1016/j.jobe.2019.100742.

Tabit K, Hajjou H, Waqif M, Saâdi L, "Effect of CaO/SiO2 ratio on phase transformation and properties of anorthite-based ceramics from coal fly ash and steel slag", Ceramics International, 2020, 46 (6), 7550-7558. https://doi.org/10.1016/j.ceramint.2019.11.254.

Tam VW, Tam CM, "A review on the viable technology for construction waste recycling", Resources, Conservation Recycling, 2006, 47 (3), 209-221. https://doi.org/10.1016/j.resconrec.2005.12.002.

Tang Z, Li W, Tam VW, Xue C, "Advanced progress in recycling municipal and construction solid wastes for manufacturing sustainable construction materials", Resources, Conservation & Recycling: X, 2020, 6, 100036. https://doi.org/10.1016/j.rcrx.2020.100036.

Tavira J, Jiménez JR, Ayuso J, López-Uceda A, Ledesma EF, "Recycling screening waste and recycled mixed aggregates from construction and demolition waste in paved bike lanes", Journal of Cleaner Production, 2018, 190, 211-220. https://doi.org/10.1016/j.jclepro.2018.04.128.

Thaarrini J, Dhivya S, "Comparative study on the production cost of geopolymer and conventional concretes", International Journal of Civil Engineering Research, 2016, 7 (2), 117-124.

Tuyan M, Andiç-Çakir Ö, Ramyar K, "Effect of alkali activator concentration and curing condition on strength and microstructure of waste clay brick powder-based geopolymer", Composites Part B: Engineering, 2018, 135, 242-252. https://doi.org/10.1016/j.compositesb.2017.10.013.

Wang X, Yu R, Shui Z, Song Q, Liu Z, Liu Z, Wu S, "Optimized treatment of recycled construction and demolition waste in developing sustainable ultra-high performance concrete", Journal of Cleaner Production, 2019, 221, 805-816. https://doi.org/10.1016/j.jclepro.2019.02.201.

Wong CL, Mo KH, Yap SP, Alengaram UJ, Ling T-C, "Potential use of brick waste as alternate concrete-making materials: A review", Journal of Cleaner Production, 2018, 195, 226-239. https://doi.org/10.1016/j.jclepro.2018.05.193.

Xu H, Van Deventer J, "The geopolymerisation of alumino-silicate minerals", International Journal of Mineral Processing, 2000, 59 (3), 247-266. https://doi.org/10.1016/S0301-7516(99)00074-5.

Yao J, Qiu H, He H, Chen X, Hao G, "Application of a Soft Soil Stabilized by Composite Geopolymer", Journal of Performance of Constructed Facilities, 2021, 35 (4), 04021018. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001586.

Yehualaw MD, Hwang C-L, Vo D-H, Koyenga A, "Effect of alkali activator concentration on waste brick powder-based ecofriendly mortar cured at ambient temperature", Journal of Material Cycles and Waste Management, 2021, 23 (2), 727-740. 10.1007/s10163-020-01164-6.

Zawrah MF, Gado RA, Feltin N, Ducourtieux S, Devoille L, "Recycling and utilization assessment of waste fired clay bricks (Grog) with granulated blast-furnace slag for geopolymer production", Process Safety and Environmental Protection, 2016, 103, 237-251. https://doi.org/10.1016/j.psep.2016.08.001.