- Lindroos M., and et al., The Deformation, Strain Hardening, and Wear Behavior of Chromium-Alloyed Hadfield Steel in Abrasive and Impact Conditions. Tribology Letters, Vol. 57, pp. 1-11, 2015.
- Barannikova S. A., Li Y., Malinovsky A., Pestsov D., Study of Localized Plastic Deformation of Hadfield Steel Single Crystals Using Speckle Photography Technique. Key Engineering Materials, Vol. 683, pp. 84-89, 2016.
- Limooei M.B., Hosseini SH., Optimization of Heat Treatment in Manganese Steel by Taguchi Method. Applied Mechanics and Materials, Vol. 598, pp. 43-46, 2014.
- Magdaluyo E. R. and et al., Gouging Abrasion Resistance of Austenitic Manganese Steel with Varying Titanium. of the World Congress on Engineering 2015, London, English, London, Vol. 2, pp. 1-4, 2015.
- Limooei M.B., and Hosseini Sh., Optimization of properties and structure with addition of titanium in hadfield steels. Proceedings of Metal 2012, Czech Republic, Vol. 1, pp. 1-6, 2012.
- Srivastava A.K. and et al., Corrosion Behaviour of TiC-Reinforced Hadfield Manganese Austenitic Steel Matrix In-Situ Composites. Open Journal of Metal, Vol. 5, pp. 11-17, 2015.
- Najafabadi V.N., Amini K. and Alamdarlo M.B., Investigating the effect of titanium addition on the wear resistance of Hadfield steel. Metallurgical Research Technologe, Vol. 111, No. 6, pp. 375-382, 2014.
- Ervina Efzan M. N., Vigram Kovalan K. and Suriati G., A review of welding parameter on corrosion behavior of Aluminum, J. Eng. Appl. Sci., Vol. 1, pp. 17-22, 2012.
- Afolabi A.S., Effect of Electric Arc Welding Parameters on Corrosion Behaviour of Austenitic Stainless Steel in Chloride Medium. AU J. T., Vol. 11, No. 3, pp. 171-180, 2008.
- Kumar S., Shahi A. S., Effect of heat input on the microstructure and mechanical properties of gas tungsten arc welded AISI 304 stainless steel joints, Materials & Design, Vol. 32, pp. 3617–3623, 2011.
- Dong H., Hao X., Deng D., Effect of Welding Heat Input on Microstructure and Mechanical Properties of HSLA Steel Joint, Metallography, Microstructure and Analysis, Vol. 3, pp. 138–146, 2014.
- سبزی م.، معینی‌فر ص. و نجفی‌بیرگانی ا.، بررسی تأثیر حرارت ورودی بر رفتار خوردگی اتصالات جوش فولاد هادفیلد در فرآیند SMAW ، مجله علوم و فناوری جوشکاری ایران، سال اول، شماره 1، ص 23 - 13، 1394.
- سبزی م. و کلانتری‌پور ر.، بررسی تأثیر حرارت ورودی بر ریزساختار و خواص مکانیکی اتصالات جوش فولاد هادفیلد در فرآیندSMAW ، مجله علوم و فناوری جوشکاری ایران، شماره 2، ص. 88 – 78، 1395.
- ترحم‌نژاد م.ع.، دهملائی ر. و معینی‌فر ص.، بررسی تأثیر حرارت ورودی فرآیند GTAW بر خوردگی اتصالات جوش فولاد زنگ نزن دوفازی 2205، مجله مواد نوین، شماره 5، ص. 110- 95، 1393.
- Mendez J. and et al., Weldability of austenitic manganese steel, Journal of Materials Processing Technology, Vol. 153-154, pp. 596-602, 2004.
- Curiel-Reyna E. and et al., Influence of cooling rate on the structure of heat affected zone after welding a high manganese steel, Materials and Manufacturing Processes, Vol. 20, pp. 813-822, 2005.
- Annual book of ASTM standards, ASTM 128 A / 128 M, Standard specification for steel castings, austenitic manganese. ASTM International, Vol. 1, 2012.
- Annual book of AWS standards, Standard Welding Procedure Specification, Shielded Metal Arc Welding of Carbon Steel, AWS In., Vol. 1, 2005.
- Annual book of AWS Standards, Welding Science and Technology, 9th Edition, Vol. 1, 2015.
- Lee T.K. and Choi C.S., Driving Force for γ→ε Martensitic Transformation and Stacking Fault Energy of γ in Fe-Mn Binary System. Metallurgical and Material Transaction A, Vol. 31A, pp. 355-360, 2000.
- Hong J. H., Lee S. H., Kim J. G. and Yoon J. B., Corrosion behaviour of copper containing low alloy steels in sulphuric acid. Corrosion Science, Vol. 54, pp. 174-182, 2012.
- Hou R. Q. and et al., Localized Corrosion of Binary Mg-Ca Alloy in 0.9 wt% Sodium Chloride Solution. Acta Metallurgica Sinica(English Letters), Vol. 29, No. 1, pp. 46-57, 2016.
- Lim M. L. C., Kelly R. G. and Scully J. R., Overview of Intergranular Corrosion Mechanisms, Phenomenological Observations, and Modeling of AA5083. Corrosion, Vol. 72, No. 2, pp. 198-220, 2016.
|
