[1]       Zhang J., Wang J., Dong S., Yu, X., Han B.,  A review of the current progress and application of 3D printed concrete. Composites Part A: Applied Science and Manufacturing. Vol. 125, No.3, pp. 105-133, 2019.

[2]       Garg V., Mathur J., Bhatia A., Building energy simulation: A workbook using designbuilder™. 2020: CRC Press.

[3]       Syed M., Moeini M., Okumus P., Elhami-Khorasani N., Ross B. E., Kleiss M. C. B.,  Analytical study of tessellated structural-architectural reinforced concrete shear walls. Engineering Structures. Vol. 244, No. 6, pp. 112-138, 2021.

[4]       Eslami E., Zhou L., Yun H.-B., Noncontact Absolute Stress Measurement for UHPC Using Raman Piezospectroscopy. Transportation Research Board 98th Annual Meeting, 2019.

[5]       Yun H. B., Eslami E., Zhou L.,  Noncontact stress measurement from bare UHPC surface using R aman piezospectroscopy. Journal of Raman Spectroscopy. Vol. 49, No. 9, pp. 1540-1551, 2018.

[6]       Esmaeili J., Andalibi K.,  Investigation of the effects of nano-silica on the properties of concrete in comparison with micro-silica. International Journal of Nano Dimension. Vol. 3, No. 4, pp. 321-328, 2013.

[7]       Esmaeili J., Andalibi K., Gencel O.,  Mechanical characteristics of experimental multi-scale steel fiber reinforced polymer concrete and optimization by Taguchi methods. Construction and Building Materials. Vol. 313, No. pp. 125500, 2021.

[8]       Esmaeili J., Aghdam O. R., Andalibi K., Kasaei J., Gencel O.,  Experimental and numerical investigations on a novel plate anchorage system to solve FRP debonding problem in the strengthened RC beams. Journal of Building Engineering. Vol. 45, pp. 103413, 2022.

[9]       Altas, E., Khosravi, F., Gokkaya, H., Maleki, V. A., Akınay Y., Ozdemir O., Bayraktar O., Kandas H.,  Finite element simulation and experimental investigation on the effect of temperature on pseudoelastic behavior of perforated Ni–Ti shape memory alloy strips. Smart Materials and Structures. Vol. 31, No. 2, pp. 025031, 2022.

[10]    Han Y., Yang Z., Ding T., Xiao J.,  Environmental and economic assessment on 3D printed buildings with recycled concrete. Journal of Cleaner Production. Vol. 278, pp. 123884, 2021.

[11]    He Y., Zhang Y., Zhang C., Zhou H.,  Energy-saving potential of 3D printed concrete building with integrated living wall. Energy and Buildings. Vol. 222, pp. 110110, 2020.

[12]    Tian X., Zhou K.,  3D printing of cellular materials for advanced electrochemical energy storage and conversion. Nanoscale. Vol. 12, No. 14, pp. 7416-7432, 2020.

[13]    Ghaderi M., Maleki V. A., Andalibi K.,  Retrofitting of unreinforced masonry walls under blast loading by FRP and spray on polyurea. Cumhuriyet Science Journal. Vol. 36, No. 4, pp. 462-477, 2015.

[14]    Ghaderi M., Ghaffarzadeh H., Maleki V. A.,  Investigation of vibration and stability of cracked columns under axial load. Earthquakes and Structures. Vol. 9, No. 6, pp. 1181-1192, 2015.

[15]    Esmaeili J., Andalibi K., Gencel O., Maleki F. K., Maleki V. A.,  Pull-out and bond-slip performance of steel fibers with various ends shapes embedded in polymer-modified concrete. Construction and Building Materials. Vol. 271, pp. 121531, 2021.

[16]    Vahidi Pashaki P., Pouya M., Maleki V. A.,  High-speed cryogenic machining of the carbon nanotube reinforced nanocomposites: Finite element analysis and simulation. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. Vol. 232, No. 11, pp. 1927-1936, 2018.

[17]    Bondareva N. S., Sheremet M. A.,  Influence of phase change material melting point and its location on heat and mass transfer in a brick. Journal of Energy Storage. Vol. 42, No. pp. 23-32, 2021.

[18]    Pichler, M., Haddadi, B., Jordan, C., Harasek, M.,  Modeling the effective thermal conductivity of hollow bricks at high temperatures. Construction and Building Materials. Vol. 309, pp. 123-140, 2021.

[19]    Boukendil M., Abdelbaki A., Zrikem Z.,  Numerical simulation of coupled heat transfer through double hollow brick walls: Effects of mortar joint thickness and emissivity. Applied Thermal Engineering. Vol. 125, pp. 1228-1238, 2017.

[20]    Sassine E., Cherif Y., Dgheim J., Antczak E.,  Experimental and Numerical Thermal Assessment of Lebanese Traditional Hollow Blocks. International Journal of Thermophysics. Vol. 41, No. 4, pp. 47-59, 2020.

[21]    Al-Hazmy M. M.,  Analysis of coupled natural convection–conduction effects on the heat transport through hollow building blocks. Energy and Buildings. Vol. 38, No. 5, pp. 515-521, 2006.

[22]    Sun J., Fang L.,  Numerical simulation of concrete hollow bricks by the finite volume method. International Journal of Heat and Mass Transfer. Vol. 52, No. 23-24, pp. 5598-5607, 2009.

[23]    del Coz Díaz J., Nieto P. G., Biempica C. B., Gero M. P.,  Analysis and optimization of the heat-insulating light concrete hollow brick walls design by the finite element method. Applied thermal engineering. Vol. 27, No. 8-9, pp. 1445-1456, 2007.

[24]    Antar, M. A.,  Thermal radiation role in conjugate heat transfer across a multiple-cavity building block. Energy. Vol. 35, No. 8, pp. 3508-3516, 2010.

[25]    del Coz Díaz J., Nieto P. G., Hernández J. D., Rabanal F. Á.,  A FEM comparative analysis of the thermal efficiency among floors made up of clay, concrete and lightweight concrete hollow blocks. Applied Thermal Engineering. Vol. 30, No. 17-18, pp. 2822-2826, 2010.

[26]    Huang, J., Yu, J., Yang, H.,  Effects of key factors on the heat insulation performance of a hollow block ventilated wall. Applied Energy. Vol. 232, No. pp. 409-423, 2018.

[27]    Alghamdi A. A., Alharthi H. A.,  Multiscale 3D finite-element modelling of the thermal conductivity of clay brick walls. Construction and Building Materials. Vol. 157, No. pp. 1-9, 2017.

[28]    Jamal B., Boukendil M., El moutaouakil L., Abdelbaki A., Zrikem Z.,  Numerical investigation of combined heat transfer through hollow brick walls. The European Physical Journal Plus. Vol. 135, No. 10, pp. 813, 2020.

[29]    Ouakarrouch M., El Azhary K., Laaroussi N., Garoum M., Feiz A.,  Three-dimensional numerical simulation of conduction, natural convection, and radiation through alveolar building walls. Case Studies in Construction Materials. Vol. 11, pp. 34-42, 2019.

[30]    Suntharalingam, T., Upasiri, I., Gatheeshgar, P., Poologanathan, K., Nagaratnam, B., Santos, P., Rajanayagam, H.,  Energy Performance of 3D-Printed Concrete Walls: A Numerical Study. Buildings. Vol. 11, No. 10, pp. 432-445, 2021.

[31]    Sambucci M., Valente M.,  Thermal Insulation Performance Optimization of Hollow Bricks Made up of 3D Printable Rubber-Cement Mortars: Material Properties and FEM-based Modelling. IOP Conference Series: Materials Science and Engineering. Vol. 1044, No. 1, pp. 34-42, 2021.

[32]    Jamal B., Boukendil M., El Moutaouakil L., Abdelbaki A., Zrikem Z.,  Thermal analysis of hollow clay bricks submitted to a sinusoidal heating. Materials Today: Proceedings. Vol. 45, pp. 7399-7403, 2021.

[33]    Suntharalingam T., Gatheeshgar P., Upasiri I., Poologanathan K., Nagaratnam B., Rajanayagam H., Navaratnam S.,  Numerical Study of Fire and Energy Performance of Innovative Light-Weight 3D Printed Concrete Wall Configurations in Modular Building System. Sustainability. Vol. 13, No. 4, pp. 2314-2326, 2021.

[34]    Freddi A., Salmon M., Design of Experiment, in Design Principles and Methodologies. 2019, Springer. p. 127-158.

[35]    Park, G.-J.,  Design of experiments. British Medical Journal Vol. 23, pp. 309-391, 2007.

[36]    Condra, L., Reliability improvement with design of experiment. 2001: CRC Press.

[37]    Suntharalingam T., Gatheeshgar P., Upasiri I., Poologanathan K., Nagaratnam B., Corradi M., Nuwanthika D.,  Fire performance of innovative 3D printed concrete composite wall panels–A Numerical Study. Case Studies in Construction Materials. Vol. 15, pp. e00586, 2021.