- Kaur M., Singh K., Review on Titanium and Titanium Based Alloys as Biomaterials for Orthopaedic Applications. Materials Science and Engineering C, 102, pp. 844-862, 2019.
- Reclaru L., Cosmina Ardelean L., Florian Grecu A., Adrian Miu C., Multicomponent Alloys for Biomedical Applications. in: High Entropy Alloy,
- Ansarian I., Microstructure Evolution and Mechanical Behaviour of Severely Deformed Pure Titanium Through Multi Directional Forging. Journal of Alloys and Compounds, Vol. 776, pp. 83-95, 2019.
- Froes F.H.(Sam)., Titanium for Medical and Dental Applications an Introduction, in: Med. Dent. Appl, 2018.
- Agripa H., Botef I., Modern Production Methods for Titanium Alloys: a Review. In Titanium Alloys-Novel Aspects of Their Manufacturing and Processing. IntechOpen, 2019.
- Valiev R.Z., Estrin Y., Horita Z., Langdon T.G., Zehetbauer M.J., Zhu Y., Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation: tenyears later, JOM, Vol. 68, pp. 1216-1226, 2016.
- Mishnaevsky L., Levashov E., Valiev R.Z., Segurado J., Sabirov I., N. Enikeev, Prokoshkin S., Solov’Yov A.V., A. Korotitskiy A., Gutmanas E., Gotman I., Rabkin E., Psakh’E S., Dluhos L., Seefeldt M., Smolin A., Nanostructured Titanium-Based Materials for Medical Implants: modeling and development, Materials Science and Engineering. R Rep, 2014.
- Khodabakhshi F., Haghshenas M., Eskandari H., & Koohbor B. Hardness−Strength Relationships in Fine and Ultra-Fine Grained Metals Processed Through Constrained Groove Pressing. Materials Science and Engineering: A, Vol. 636, pp. 331-339,
- Milner J. L., Abu-Farha F., Bunget C., Kurfess T., Hammond V. H. Grain Refinement and Mechanical Properties of CP-Ti Processed by Warm Accumulative Roll Bonding. Materials Science and Engineering: A, Vol. 561, pp. 109-117, 2013.
- Shirooyeh M., Xu J., Langdon T. G. Microhardness evolution and Mechanical Characteristics of Commercial Purity Titanium Processed by High-Pressure Torsion. Materials Science and Engineering: A, Vol. 614, pp. 223-231, 2014.
- Jager A., artnerova V., Tesa K., Microstructure and Anisotropy of the Mechanical Properties in Commercially Pure Titanium after Equal Channel Angular Pressing with Back Pressure at Room Temperature, Materials Science and Engineering, Vol. 644, pp. 114-120, 2015.
- Segal V., Review: Modes and Processes of Severe Plastic Deformation (SPD), Materials (Basel)
- Valiev R. Z., Zhilyaev A P., Langdon T., Bulk Nanostructured Materials. Chap,Vol. 3, pp. 417-433, 2013.
- Beygelzimer Y., Varyukhin V., Synkov S., Orlov D., Useful Properties of Twist Extrusion. Materials Science and Engineering: A, Vol. 503, No. 1-2, pp. 14-17, 2009.
- Beygelzimer Y., Kulagin R., Latypov M. I., Varyukhin V., Kim H. S., Off-Axis Twist Extrusion for Uniform Processing of Round Bars. Metals and Materials International, Vol. 21, No. 4, pp. 734-740, 2015.
- Beygelzimer Y., Varyukhin V., Kulagin R., Orlov D., Twist extrusion (TE), in: A. Rosochowski (Ed.), Sev. Plast. Deform. Technol., Whittles Publishing, pp. 202-234, 2017.
- Wang L., Qu J., Chen L., Meng Q., Zhang L. C., Qin J., Lu W., Investigation of Deformation Mechanisms in β-Type Ti-35Nb-2Ta-3Zr Alloy via FSP Leading to Surface Strengthening. Metallurgical and Materials Transactions A, Vol. 46, No. 11, pp. 4813-4818, 2015.
- Zhu C., Lv Y., Qian C., Ding Z., Jiao T., Gu X., Lu E., Wang L., Zhang F., Microstructures, Mechanical, and Biological Properties of a Novel Ti-6V-4V/zinc Surface Nanocomposite Prepared by Friction Stir Processing, International Journal of Nanomedicine, 2018.
- Wang L., Xie L., Lv Y., Zhang L. C., Chen L., Meng, Q., Lu W., Microstructure Evolution and Superelastic Behavior in Ti-35Nb-2Ta-3Zr Alloy Processed by Friction Stir Processing. Acta Materialia, Vol. 131, pp. 499-510, 2017.
- Kawałko J., Wronski M., Bieda M., Sztwiertnia K., Wierzbanowski K., Wojtas D., Łagoda M., Stachowski P., Pachla W., Kulczyk M., Microstructure of Titanium on Complex Deformation Paths: Comparison of ECAP, KOBO and HE Techniques, Materials Characterization, Vol. 141, pp. 19-31, 2018.
- Kawałko J., Bobrowski P., Koprowski P., Jarzębska A. N. N. A., Bieda M., Łagoda M., Sztwiertnia K. Microstructure Evolution of CP Titanium During Deformation in KoBo Process Followed by Cold Rolling. Journal of Alloys and Compounds, Vol. 707, pp. 298-303, 2017.
- Bazarnika P., Nosewiczb S., Effect of Spark Plasma Sintering and High-Pressure Torsion on the Microstructural and Mechanical Properties of a Cu–SiC Composite, Materials Science & Engineering A, 766, 2019.
- Eze A.A., Jamiru T., Sadiku E.R., Mondiu.Ọ. Durowoju, Kupolati W.K., Ibrahim I.D., Obadele B., Olubambi P.A., S. Diouf, Effect of titanium addition on the Microstructure, Electrical Conductivity, Thermal Conductivity and Mechanical Properties of Copper by Using SPS for the Preparation of Cu-Ti alloys, Journal of Alloys and Compounds,
- Zhang X.J., Song F., Wei Z.P., Yang W.C., Dai Z.K., Microstructural and Mechanical Characterization of In-situ TiC/Ti Titanium Matrix Composites Fabricated by Graphene/Ti Sintering Reaction, Materials Science and Engineering A, Vol. 705, pp. 153-159, 2017.
- Sajadifar S. V., Atli C., Yapici G., Effect of Severe Plastic Deformation on the Damping Behavior of Titanium. Materials Letters, Vol. 244, pp. 100-103, 2019.
- Sheikh H., Ebrahimi R., Bagherpour E. Crystal Plasticity Finite Element Modeling of Crystallographic Textures in Simple Shear Extrusion (SSE) Process. Materials & Design, Vol. 109, pp. 289-299, 2016.
- Tork N. B., Saghafian H., Razavi S. H., Al-Fadhalah K. J., Ebrahimi R., Mahmudi R. Microstructure and Texture Characterization of Mg–Al and Mg–Gd binary Alloys Processed by Simple Shear Extrusion. Journal of Materials Research and Technology, Vol. 8, No. 1, pp. 1288-1299, 2 0 1 9.
- Dong, L. L., Xiao, B., Liu, Y., Li, Y. L., Fu, Y. Q., Zhao, Y. Q., Zhang, Y. S., Sintering Effect on Microstructural Evolution and Mechanical Properties of Spark Plasma Sintered Ti Matrix Composites Reinforced by Reduced Graphene Oxides. Ceramics International, Vol. 44, No. 15, pp. 17835-17844, 2018.
- Bagherpour E., Qods F., Ebrahimi R., Miyamoto H., Microstructure Evolution of Pure Copper During a Single Pass of Simple Shear Extrusion (SSE): Role of Shear reversal, Materials Science and Engineering: A, Vol. 666, pp. 324-338, 2016.
- Shirooyeh M., Xu J., Langdon T.G., Micro Hardness Evolution and Mechanical Characteristics of Commercial Purity Titanium Processed by High-Pressure Torsion, Materials Science and Engineering: A, Vol. 614, pp. 223-231, 2014.
- Standard Test Methods for Tension Testing of Metallic Materials, American Association State Highway and Transportation Officials Standard AASHTO No.: T68 An American National Standard
- Mahmoudi M., Shokuhfar A., Nakhodchi S.,new Severe Plastic Deformation Technique Based on Simple and Pure Shear, Modares Mechanical Engineering, Vol.16, No.4, pp.145-154, 2016 (in Persian)
- Knacke, Kubaschewski O., Hesselmann K., Thermaochemical Properties of Inorganic Substance, Vol. 264, 2nd ed. New York: Springer-Verlag, pp. 2501–104, 1991.
- Popov V.A., Shelekhova E.V., Prosviryakov A.S., Presniakov M.Y., Senatulin B.R.， Kotov A.D., Khomutov M.G., Particulate Metal Matrix Composites Development on the Basis of in Situ synthesis of TiC Reinforcing Nanoparticles During Mechanical Alloying, Journal of Alloys and Compounds, Vol. 707, pp. 365-370, 2017.
- Wang F., Li Y., Wang X., Koizumi Y., Kenta Y., Chiba A., In-situ Fabrication and Characterization of Ultrafine Structured Cu-TiC Composites with High Strength and High Conductivity by Mechanical Milling, Journal of Alloys and Compounds, Vol. 657, pp. 122-132, 2016.
- Kwon H., Takamichi M., Kawasaki A., Leparoux M., Investigation of the Interfacial Phases Formed Between Carbon Nanotubes and Aluminum in a Bulk Material, Materials Chemistry and Physics, Vol. 138, pp. 787-793, 2013.
- Sergueeva A. V., Stolyarov V., Valiev R., Mukherjee A. K., Advanced Mechanical Properties of Pure Titanium with Ultrafine Grained Structure, Scripta Materialia, Vol. 45, No. 7, pp. 747-752,2001.
- Phaniraj M. P., Prasad M. J. N. V., Chokshi A. H., Grain-Size Distribution Effects in Plastic Flow and Failure, Materials Science and Engineering: A, Vol. 463, No. 1–2, pp. 231-237, 2007.
- Torabzadeh H., Faraji G., A Review of the Production of Ultrafine Grained and Nanograined Metals by Applying Severe Plastic Deformation, Modares Mechanical Engineering, Vol. 16, No. 6, pp. 271-282, 2016.
|
2؛ یدالله یعقوبی نژاد3؛ حمید بهلولی4
