تحلیل تجربی و عددی رشد ترک خستگی در پیچ‏ های کربونیزه شده سرسیلندر موتور بنزینی

[1]  Pilar V. G., Ana P.M. and María G.M., Failure analysis study on a fractured bolt. Engineering Failure Analysis, Vol. 109, pp. 104355, 2020.

[2]  Yuchen Song Y., Wang J., Uy B. and Li D., Experimental behaviour and fracture prediction of austenitic stainless steel bolts under combined tension and shear. Journal of Constructional Steel Research, Vol. 166, pp. 105916, 2020.

[3]  Yu Z., Xu X., Failure analysis of diesel engine cylinder head bolts. Engineering Failure Analysis, Vol. 13, pp. 826–834, 2006.

[4]  Fonte M., Reis L., Infante V. and Freitas M., Failure analysis of cylinder head studs of a four stroke marine diesel engine. Engineering Failure Analysis, Vol. 101, pp. 298–308, 2019.

[5]  Aliakbari K. and Akbarpour Mamaghani T., Analysis of fatigue crack growth in cylinder head bolts of gasoline engine based on experimental data. Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 42(5), pp. 244, 2020.

[6]  Qin C., He S., Zhong L., Feng W., Pang J., Li Q. and He W., Fracture failure analysis of pressure gauge bolt on fuel gas system of offshore platform. Engineering Failure Analysis, Vol. 117, pp. 104959, 2020.

[7]  Li L. and Wang R., Failure analysis on fracture of worm gear connecting bolts. Engineering Failure Analysis, Vol. 36, pp. 439–446, 2014.

[8]  Aliakbari K., Failure Analysis of Base Plate Bolts of Radial Forging Machine. Journal of Stress Analysis, Vol. 4(1): 89–98, 2019.

[9]  ASTM E415-17, Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry (ASTM International, Philadelphia, 2017).

[10]              ASTM E1086-14, Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry (ASTM International, Philadelphia, 2014).

[11]             ASTM E8/E8M-16ae1, Standard Test Methods for Tension Testing of Metallic Materials (ASTM International, Philadelphia, 2016).

[12]             Aliakbari K. and Farhangdoost KH., Plastic deformation influence on material properties of autofrettaged tubes used in diesel engines injection system. J Press Vessel Technol, Vol. 136, pp. 041402-1, 2014.

[13]             Aliakbari K. and Farhangdoost KH., The investigation of modelling material behavior in autofrettaged tubes made from aluminium alloys. Int J Eng, Vol. 27, pp. 803–810, 2014.

[14]             ASTM E384-17, Standard Test Method for Knoop and Vickers Hardness of Materials (ASTM International, Philadelphia, 2017).

[15]             Farahmand B., Chapter 3: Fatigue Crack Growth and Applications. Fracture Mechanics of Metals, Composites, Welds, and Bolted Joints. Springer, pp. 118-179, 2001.

[16]             ASTM E647-11, Standard Test Method for Measurement of Fatigue Crack Growth Rates. (ASTM International, Philadelphia, 2011).

[17]             Witek L., Sikora M., Stachowicz F. and Trzepiecinski T., Stress and failure analysis of the crankshaft of diesel engine. Engineering Failure Analysis, Vol. 82, pp. 703-712, 2017.

[18]             DIN EN 10083-3, Steels for quenching and tempering - Part 1: General technical delivery conditions (German National Standard, Berlin, 2007). 

[19]             Colombo R.L., Fusani F. and Lamberto M., On the soft layer in carburized gears. Journal of Heat Treating, Vol. 3, pp. 126-8, 1983.

[20]             Yu Z. W., Xu X. L., Yang Z. and Li Y. Y., Case internal oxidation and intergranular fracture of carburized splined-shaft. Engineering Failure Analysis, Vol. 22, pp. 141–151, 2012.

[21]             ISO 898-1:2013 (en), Mechanical properties of fasteners made of carbon steel and alloy steel- Part 1: bolts, screws and studs with specified property classes—coarse thread and fine pitch thread, 2013.

[22]             Taylor C. F., The Internal-Combustion Engine in Theory and Practice: Volume 2: Combustion, Fuels, Materials, Design, MIT Press, Cambridge, 1985.

[23]             Kodur V., Yahyai M., Rezaeian A., Eslami M. A. and Poormohamadi A., Residual mechanical properties of high strength steel bolts subjected to heating-cooling cycle. Journal of Constructional Steel Research, Vol. 131, pp. 122–131, 2017.

[24]             Li Y., Lu P., Wang B., Xiang Q. and Ma B., Failure analysis of bolts on fatigue test bench for excavator stick, Engineering Failure Analysis, Vol. 118, pp. 104863, 2020.

[25]             Park J. H. and Kim D. S., Effect of CaO–Al2O3–MgO slags on the formation of MgO–Al2O3 inclusions in ferritic stainless steel. Metall. Mater. Trans B., Vol. 36, pp. 495–502, 2005.

[26]             Lyu S., Ma X., Chen M., Huang Z., Yao Z., Wang G. and Zhao B., Application of phase equilibrium studies of CaO–SiO2–Al2O3–MgO system for oxide inclusions in Si-deoxidized steels. Calphad, Vol. 68(101721), pp. 1–8, 2020.

[27]             Shigley's, Mechanical Engineering Design, ninth edition, Mc-Graw-Hill, Chap. 8, 2012.

[28]             Bowman, Distribution–Barnes Group, Fastener Facts, Cleveland. 1985.

[29]             ASM Metals Hand Book Volume 12 - Fractography. Second printing, 1992.

[30]             Infante V., Silva J. M., Silvestre M. and Baptista R., Failure of a crankshafts of an aeroengine: a contribution for an accident investigation, Engineering Failure Analysis, Vol. 35, pp. 286–293, 2013.

[31]             Freitas M. D. and François D., Analysis of fatigue crack growth in rotary bend specimens and railway axles, Fatigue Fract. Eng. Mater. Struct. Vol. 18, pp. 171–178, 1995.

[32]             Fonte M. and Freitas M., Semi-elliptical crack growth under rotating or reversed bending combined with steady torsion, Fatigue Fract. Eng. Mater. Struct., 20:895–906, 1997.

[33]             Fonte M, Freitas M (1999) Stress intensity factors for semi-elliptical surface cracks in round bars under bending and torsion. International Journal of Fatigue, Vol. 21, pp. 457–463, 1999.

[34]             Shiratori M., Miyoshi T., Sakay Y. and Zhang G. R., Factors analysis and application of influence coefficients for round bar with a semi-elliptical surface crack, in: Y. Murakami (Ed.), Handbook of Stress Intensity Factors, vol. II, Pergamon Press, Oxford 659–665, 1987.

[35]             Hellen T.K., On the method of virtual crack extension. International Journal for Numerical methods in Engineering, Vol. 9, pp. 187–207, 1975.

[36]             Parks D. M., A stiffness derivative finite element technique for determination of elastic crack tip stress intensity factor. International Journal of Fracture, Vol. 10, pp. 487–502, 1974.

[37]             Forman R. G., Kearney V. E. and Engel R. M., Numerical analysis of crack propagation in cyclic-loaded structures, Journal of Basic Engineering, Vol. 89, pp. 459-463, 1976.

[38]             Elber W., The significance of fatigue crack closure, in damage tolerance in aircraft structures. ASTM STP., Vol.  486, pp. 230-242, 1971.

[39]             NASA, Fatigue Crack Growth Computer Program NASGRO Version 3.0, Reference Manual. JSC-22267B, NASA, Lyndon B. Johnson Space Center, Texas, 2000.

[40]             Anderson T. L., Fracture Mechanics, fundamentals and applications, second edition, CRC press, 1994.

[41]             Newman J.J., A crack opening stress equation for fatigue crack growth, International Journal of Fracture, Vol. 24(4), pp. 131-135, 1984.

[42]             Murakami Y., Stress intensity factors handbook, Vol. 1. Oxford: Pergamon Press, 1987.

[43]             Mehrzadi M. and Taheri F., The influence of negative and positive stress ratios on crack growth rate in AM60B magnesium alloy, Materials Science and Engineering A, Vol. 545, pp. 68– 77, 2012.

[44]             Meguid S. A., Engineering Fracture Mechanics, Springer Netherlands, 1989.

[45]             Campbell F. C., Fatigue and Fracture: Understanding the Basics. ASM, 2012.

[46]             Fukumura N., Suzuki T., Hamada S., Tsuzaki K. and Noguchi H., Mechanical examination of crack length dependency and material dependency on threshold stress intensity factor range with Dugdale model. Engineering Fracture Mechanics, Vol. 135, pp. 168-186, 2015.

[47]             Masoudi Nejad R., Farhangdoost KH. and Shariati M., Numerical study on fatigue crack growth in railway wheels un-der the influence of residual stresses, Engineering Failure Analysis 52:75–89, 2015.

[48]             Aliakbari K., Imanparast M. and Masoudi Nejad R., Micro-structure and fatigue fracture mechanism for a heavy-duty truck diesel engine crankshaft. Scientia Iranica B, Vol. 26(6), pp. 3313-3324, 2019.