بررسی رفتار گرمایی و سیالاتی مبادله‌کن‌گرمایی هوا ‌خنک‌شو برای به‌کارگیری در سامانه شبیه ساز ارتفاع

[1]  Ballough, J.J., Correlation, Operation, Design, and Modification of Turbofan/Jet Engine Test Cells, Federal Aviation Administration, Advisory circular AC, 2002

[2]  Japan Aerospace Exploration Agency, Altitude Test Facility, 7 2010. [Online]. Available: http://global.jaxa.jp/. [Accessed 5 May 2018].

[3]  K. Hyung Do, B. Choi, Y.-S. Han and T. Kim, Experimental investigation on the pressure drop and heat transfer characteristics of a recuperator with offset strip fins for a micro gas turbine, International Journal of Heat and Mass Transfer, Vol. 103, pp. 457-467, 2016.

[4]  Vick M., Young T., Kelly M., Hinnant K. M. and Tuttle S. G, "A Simple Recuperated Ceramic Microturbine: Design Concept, Cycle Analysis, and Recuperator Component Prototype Tests, In Proceedings of ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Seoul, South Korea, 2016.

[5]  Babu T. P. A. and Talekala M. S., Evaluation of heat transfer surfaces for compact recuperator using a CFD code, Heat Mass Transfer, Vol. 45, pp. 767-774, 2009.

[6]   Brown, R., A Procedure for Preliminary Estimates of Air Cooled Heat Exchangers, Chemical Engineering McGraw-Hill Publication Book Co., Newyork, 1979.

[7]  Ganapathy V., Process-Design Criteria of Air Cooled Heat Exchangers, Chemical Engineering, McGraw-Hill Publication Book Co., NewYork, 1979.

[8]  Tarrad A. H. Khudor and D. S., A Correlation for the Air-Side Heat Transfer Coefficient Assessment in Continuous Flat-Plate Finned Heat Exchangers, Journal of Thermal Science and Engineering Applications, p. 9, 2015.

[9]  Kessen, M.J., Optimal Design of an Air-Cooled Condenser for Flue Gas from a Power Plant, PhD. Thesis, Lehigh University, 2012.

[10]             Wongwises S. and Chokeman Y., Effect of fin pitch and number of tube rows on the air side performance of herringbone wavy fin and tube heat exchangers, Energy Conversion and Management, Vol. 46, pp. 2216-2231, 2004

[11]             Eckels P. W, and Rabas T., Heat Transfer and Pressure Drop of Typical Air Cooler Finned Tubes, Journal of Heat Transfer, Vol. 107, pp. 198-204, 1985.

[12]             Kim Y., Kim Y., Heat transfer characteristics of flat plate finned-tube heat exchangers with large fin pitch, International Journal of Refrigeration, Vol. 28, pp. 851-858, 2005.

[13]             Wang C. C., Liaw J. S. and Yang B. C., Airside performance of herringbone wavy fin-and-tube heat exchangers – data with larger diameter tube, International Journal of Heat and Mass Transfer, Vol. 54, pp. 1024-1029, 2011.

[14]             Cen Z. L., Zhao J. G. and Shen X. B., Comparative Study of Omega RSM and RNG k–ε Model for the Numerical Simulation of a Hydrocyclone, Iranian Journal of Chemistry and Chemical Engineering (IJCCE), Vol. 33, pp. 53-61, 2014.

[15]             ANSYS CFX-Solver Theory Guide, ANSYS, lnc, Canonsburg, 2013.

[16]             Khaghani Nezhad H. and Jafari Nasr M., Thermal and hydraulic analysis of compact heat exchanger with Wavy fins, Iran Journal of Chemistry and Chemical Engineering (in persian), Vol. 34, pp. 104-77, 2015.

[17]             Cengel Y., Turner R. and Cimbala J., Fundamentals of Thermal-fluid Sciences, 4th edition, McGraw Hill Higher Education, London, 2012.

[18]             Bhutta M. M. A., Hayat N., Bashir M. H. and Khan A. R., CFD applications in various heat exchangers design: A review, Applied Thermal Engineering, Vol. 32, pp. 1-12, 2012.

[19]             Farhad N. T., Sirous Z. M., kazem R. and Reza T. A. , Baffle space impact on the performance of helical baffle shell and tube heat exchangers, Applied Thermal Engineering, Vol. 44, pp. 143-149, 2012.

[20]             Al-attab K. and Zainal Z., Performance of high-temperature heat exchangers in biomass fuel powered externally fired gas turbine systems, Renewable Energy, Vol. 35, pp. 913-920, 2010

[21]             Jorisch, W. (Ed.), Vacuum Technology in the Chemical Industry (Chapter 2: Condensation under Vacuum), Wiley-VCH Verlag GmbH & Co, 2015.

[22]             API RP14E, Recommended Practice for Design and Installation of Offshore Products Platform Piping Systems. 5th ed., American Petroleum Institute, Washington, 1991.