بررسی تجربی تأثیر نسبت منظر بر انتقال گرمای یک لوله بادامکی در جریان عرضی

[1]     Hilpert R., Forsch geb ingenieurwes. Vol. 4, pp. 215-224, 1933.

[2]     Zukauskas A., Heat transfer from tubes in crossflow. Advances in Heat Transfer, Academic Press, Vol. 8, pp. 93-160, 1972.

[3]     Churchill S.W., and Bernstein M., A correlating equation for forced convection from gases and liquids to a circular cylinder in crossflow. Journal of Heat Transfer, Vol. 99, pp. 300-306, 1977.

[4]     Morgan V.T., The Overall convective heat transfer from smooth circular cylinders. Advances in Heat Transfer, Vol. 11, pp. 199-264, 1975.

[5]     Kays W.S., and London A.L., Compact Heat Exchangers. 3rd ed, McGraw-Hill, New York, 1984.

[6]     Schlichting H., Boundary layer theory. 8th ed, Springer, 2000.

[7]     Whitaker S., Forced convection heat transfer correlations for flow in pipes, past flat plates, single cylinders, single spheres, and for flow in packed beds and tube bundles. An official Publication of the American Institute of Chemical Engineers, Vol 18, pp. 361-371, 1972.

[8]     Zdravkovich M.M., Flow Around Circular Cylinder Volume 1: Fundamental. Vol. 350, pp. 375-378, 1997.

[9]     Nouri-Borujerdi A., and Lavasani A.M., Experimental study of forced convection heat transfer from a cam shaped tube in cross flows. International Journal of Heat and Mass Transfer, Vol. 50, pp. 2605–2611, 2007.

[10] Lavasani A.M., and Bayat H., Heat transfer from two cam shaped cylinders in side-by-side arrangement. International Science Index, Mechanical and Mechatronics Engineering, Vol. 6, No 7, pp. 1298-1301, 2012.

[11] Lavasani A.M., and Bayat H., Heat transfer from two cam shaped cylinders in tandem arrangement. International Science Index, Mechanical and Mechatronics Engineering, Vol. 6, No 1, pp. 330-333, 2012.

[12] Bayat H., Lavasani A.M., and Maarefdoost T., Experimental study of thermal-hydraulic performance of cam-shaped tube bundle with staggered arrangement. Energy Conversion and Management, Vol. 85, pp. 470–476, 2014.

[13] Lavasani A.M., Bayat H., and Maarefdoost T., Experimental study of convective heat transfer from in-line cam shaped tube bank in crossflow. Applied Thermal Engineering, Vol. 65, pp. 85–93, 2014.

[14] Lavasani A.M., Maarefdoost T., and Bayat H., Effect of blockage ratio on pressure drag and heat transfer of a cam‑shaped tube.  Heat and Mass Transfer, Vol. 52, pp. 1935– 1942, 2016.

[15] Mangrulkar C.K., Dhoble A.S., Deshmukh A.R., and Mandavgane S.A., Numerical investigation of heat transfer and friction factor characteristics from in-line cam shaped tube bank in crossflow. Applied Thermal Engineering, Vol. 110, pp. 521-538, 2017.

[16] Zhang G., Flow and heat transfer characteristics around egg-shaped tube. Journal of hydrodynamics, Vol. 27, pp. 76-84, 2015.

[17] Ahmed S.E.S., Ibrahiem E.Z., Mesalhy O.M., and Abdelatief M.A., Effect of attack and cone angels on air flow characteristics for staggered wing shaped tubes bundle. Heat and Mass Transfer, Vol. 51, pp. 1001–1016, 2015.

[18] Mangrulkar C.K., Dhoble A.S., Chakrabarty S.G., and Wankhede U.S., Experimental and CFD prediction of heat transfer and friction factor characteristics in cross flow tube bank with integral splitter plate. International Journal of Heat and Mass Transfer, Vol. 104, pp. 964–978, 2017.

[19] El-Maghlany W.M., Alnakeeb M.A., Teamah M.A., and Sorour M.M., Experimental and numerical study of laminar mixed convection from a horizontal isothermal elliptic cylinder. International Journal of Thermal Sciences, Vol. 130, pp. 116-127, 2018.

[20] Deepakkumar R., and Jayavel S., Air side performance of finned-tube heat exchanger with combination of circular and elliptical tubes. Applied Thermal Engineering, Vol. 119, pp.  360–372, 2017.

[21] Murthy M.S.R., and Gupta A.V.S.S.K.S., Experimental investigation to study flow and heat transfer characteristics over a NACA0018 aerofoil for different height ratios. Journal of Heat and Mass Transfer, Vol. 50, pp. 923-932, 2014.

[22] Mohanty R.L., Swain A., and Das M.K., Thermal performance of mixed tube bundle composed of circular and elliptical tubes. Thermal Science and Engineering Progress, Vol. 5, pp. 492-505, 2018.

[23] Moffat R., Contributions to the theory of single-sample uncertainty analysis. ASME Journal of Fluids Engineering, Vol. 104, pp. 250-258, 1982.