شبیه‌سازی عددی جریان سیال داخل لوله تحت‌فشار راکتور CANDU-6 با استفاده از روش دینامیک سیالات محاسباتی و بررسی حضور نانو ذرات در جریان خنک‌کننده

[1]     Cacuci, D. G., Handbook of Nuclear Engineering, Springer, New York,2010.

[2]     Piro, M., Experimental and Computational Investigation of Flow By-Pass in a 37-Element CANDU Fuel Bundle in a Crept Pressure Tube, In Computational Fluid Dynamics for Nuclear Reactor Safety Applications (CFD4NRS), Cambridge, USA, 2016.

[3]     Teyssedou, A., Necciari, R., Reggio, M. and Mehdi Zadeh, F., Moderator Flow Simulation Around Calandria Tubes of Candu-6 Nuclear Reactors. Engineering Applications of Computational Fluid Mechanics, Vol. 8, No.1, pp. 178-192, 2014.

[4]     Catana, A., Danila, N., Prisecaru, I., and Dupleac, D., Thermal-hydraulics analysis for advanced fuel to be used in Candu 600 nuclear reactors. Paul Scherrer Institut, Switzerland ,2008.

[5]     Catana, A., Dupleac, D., Prisecaru, I. and Denila, N., CFD Thermal-Hydraulic analysis of a CANDU fuel channel, In NUCLEAR 2009 international conference on sustainable development through nuclear research and education, Pitesi, Romania, 2009.

[6]     Catana, A., Prisecaru, I., Dupleac, D., and Danila, N., CFD thermal-hydraulic analysis of a CANDU fuel channel with SEU43 type fuel bundle.  In International Symposium on Nuclear Energy SIEN 2007 Nuclear Power - A New Challenge, (p. 532). Romania: Romanian Nuclear Energy Association, AREN, 2009.

[7]     Zhonsheng, X., and Boczar, P. G., CANDU Fuel–Cycle Vision. Xi'an Jiatong University and Atomic Energy of Canada Limited, 2014.

[8]     Abbasian, F., Hadaller, G. I., and Fortman, R. A., Single-Phase and Two-Phase CFD Simulations of the Coolant Flow Inside a Bruce/Darlington CANDU Flow Channel. In Proc of the Int. Nuclear reactor thermal hydraulics. Conf., NURETH-16, Chicago (pp. 7820-7829), 2015.

[9]     Zadeh, F. M., Étienne, S., and Teyssedou, A., 2-D CFD time-dependent thermal-hydraulic simulations of CANDU-6 moderator flows. Nuclear Engineering and Design, Vol. 309, pp. 122-135, 2016.

[10]  Logtenberg, D., Grant, W., Chan, P., and Corcoran, E., Convective Heat Transfer in CANDU Spent Fuel Racks After a Loss of Coolant. In  26th International Conference on Nuclear Engineering (pp. V009T16A030-V009T16A030). American Society of Mechanical Engineers, 2018.

[11] Piro, M.H.A., Wassermann, F., Grundmann, S. and Leitch, B.W., Progress in on-going Experimental and Computational Fluid Dynamic Investigations within a CANDU Fuel Channel. Nuclear Engineering and Design, Vol. 299, pp.  184-200, 2016.

[12] Keheley, T., AREVA use of CFD in fuel assembly design and licensing, thermal hydraulics, Salt Lake City, UT February,23/24,2006.

[13] Catana, A., Prisecaru, I., Dupleac, D., and Danila, N., Computational fluid dynamic approach for CANDU6 and ACR1000 fuel channel coolant flow. In CIEM2009, In 3rd International Conference on ENERGY and ENVIRONMENT, Bucharest, 12-24 November 2009.

[14] Ehghaghi M. B. and Vajdi M., Numerical and Experimental Study of Splitter Blades Effect on the Centrifugal Pump Performance, Modares Mechanical Engineering journal, Vol. 15, No.3, pp. 398-410, 2015.

[15] Kim, H. T., In, W. K., and Park, J. H., three dimensional analyses of CANDU6 fuel channel using CFX code, In Transactions of the Korean Nuclear Society Autumn Meeting, Jeju, Korea, 2010.