بکارگیری متدولوژی مناسب بودن برای سرویس (FFS) در خطوط لوله با عیوب خوردگی از نوع کاهش موضعی ضخامت

[1] American Petroleum Institute (API) (API standard), Corrosion Control Documents, 2017.

[2] E. F. o. C. (EFC), Corrosion Resistant Alloys for Oil and Gas Production: Guidance on General Requirements and Test Methods for H 2 S Service, EFC-17, Maney Publishing, London, 2002.

[3] Dumitrescu A., Zecheru G. and Diniţă A., Non-destructive Testing and Repair of Pipelines. Springer International Publishing AG, Switzerland, 2018.

[4] Wang Y., Cheng G., Wu W., Li Y., Role of inclusions in the pitting initiation of pipeline steel and the effect of electron irradiation in SEM, Corrosion. Science. Vol. 130, pp. 252-260, 2018.

[5] Heidary R., Gabriel S.A., Modarres M., Groth K. M., and Vahdati N., A Review of Data-Driven Oil and Gas Pipeline Pitting Corrosion Growth Models Applicable for Prognostic and Health Management. International Journal of Prognostics and Health Management, Vol. 9, No. 1, pp. 1-13, 2018.

[6] Asadi Z.S., and Melchers R.E., Extreme value statistics for pitting corrosion of old underground cast iron pipes. Reliability Engineering and System Safety, Vol. 162, pp. 64-71, 2017.

[7] Sahraoui Y., Khelif R., Chateauneuf A., Maintenance planning under imperfect inspections of corroded pipelines, International Journal of Pressure Vessels and Piping, Vol. 104, pp. 76-82, 2013.

[8] Zhang S., Zhou W., Cost-based optimal maintenance decisions for corroding natural gas pipelines based on stochastic degradation models, Engineering Structures, Vol. 74, pp. 74-85, 2014.

[9] R. Api, 579-1/ASME FFS-1, Houston, TX:, American Petroleum Institute, 2007.

[10] Attia M., Megahed M., Darwish M. A., Sundram S. Assessment of corrosion damage acceptance criteria in API579-ASME/1 code, International Journal of Mechanics and Materials in Design, Vol. 12, No. 1, pp. 141-151, 2016.

[11] Janelle J. L. An overview and validation of the fitness-for-service assessment procedures for local thin areas, Thesis, University of Akron, 2005.

[12] Kiefner J., Maxey W., Eiber R. Duffy A., Failure stress levels of flaws in pressurized cylinders, in: Progress in Flaw Growth and Fracture Toughness Testing, Eds.: ASTM International, 1973.

[13] Netto T., Ferraz U., Botto A. On the effect of corrosion defects on the collapse pressure of pipelines, International Journal of Solids and Structures, Vol. 44, No. 22, pp. 7597-7614, 2007.

[14] Medjo B., Rakin M., Arsic M., Šarkocevic Ž., Zrilic M., Putic, S. Determination of the load carrying capacity of damaged pipes using local approach to fracture, Materials Transactions, Vol. 53, No. 1, pp. 185-190, 2012.

[15] Alang N., Razak N. Finite element analysis on burst pressure of steel pipes with corrosion defects, 13^th International Conference on Fracture, June 16–21, 2013, Beijing, China.

[16] Su C., Li X., Zhou J. Failure pressure analysis of corroded moderate-to-high strength pipelines, China Ocean Engineering, Vol. 30, No. 1, pp. 69-82, 2016.

[17] Koçak M. FITNET fitness-for-service procedure: an overview, Weld. World, Vol. 51, No. 5-6, pp. 94-105, 2007.

[18] Cicero S., Lacalle R., Cicero R., Ferreno D. Assessment of local thin areas in a marine pipeline by using the FITNET FFS corrosion module, International Journal of Pressure Vessels and Piping, Vol. 86, No. 5, pp. 329-334, 2009.

[19] Christensen C., Nielsen T. S., Mollan R. Fitness for Purpose Evaluation of Sour Service Riser Pipes, In NACE International, pp.215. San Diego, California, 2003.

[20] Jang J.-I., Choi Y., Lee J.-S., Lee Y.-H., Kwon D., Gao M., Kania R. "Application of instrumented indentation technique for enhanced fitness-for-service assessment of pipeline crack", International Journal of Fracture, Vol. 131, No. 1, pp. 15-33, 2005.

[21] Cosso G., Rizzo C., Servetto C. Fitness-for-service assessment of defected welded structural details by experimental evaluation of the fatigue resistance SN curve, Weld. World, Vol. 60, No. 5, pp. 847-858, 2016.

[22] Shekari E., Khan F., Ahmed S. A predictive approach to fitness-for-service assessment of pitting corrosion, International Journal of Pressure Vessels and Piping, Vol. 137, pp. 13-21, 2016.