شبیه سازی اکستروژن پروفیل آلومینیوم با در نظر گرفتن اثر روانکار

[1]  Saha P. K., Aluminum extrusion technology. Asm International, 2000.

[2]  Nilsen K. E., Numerical modelling of the aluminum extrusion process and comparison with results obtained from industrially extruded complex sections. Bournemouth University, 2014.

[3]  Dieter G. E., Kuhn H. A. and Semiatin S. L., Handbook of workability and process design. ASM international, 2003.

[4] Bakhshi-Jooybari M., A theoretical and experimental study of friction in metal forming by the use of the forward extrusion process. Journal of materials processing technology, Vol. 125, pp. 369-374, 2002.

[5] Flitta I. and Sheppard T., Nature of friction in extrusion process and its effect on material flow. Materials science and Technology, Vol. 19, No. 7, pp. 837-846, 2003.

[6] Kim S. H, Chung S. W. and Padmanaban S., Investigation of lubrication effect on the backward extrusion of thin-walled rectangular aluminum case with large aspect ratio. Journal of materials processing technology, Vol. 180, No. 1, pp. 185-192, 2006.

[7] Schikorra M., Donati L., Tomesani L. and Kleiner M., The role of friction in the extrusion of AA6060 aluminum alloy, process analysis and monitoring. Journal of Materials Processing Technology, Vol. 191, No. 1, pp. 288-292, 2007.

[8] Wang L., He Y., Zhang Y. Cai J., Zhou J., Duszczyk J. and Katgerman L., Modeling of double action extrusion—A novel extrusion process for friction characterization at the billet–die bearing interface. Tribology international, Vol. 43, No. 11, pp. 2084-2091, 2010.

[9]  Nakamura T., Bay N. and Zhang Z. L., FEM Simulation of a Friction Testing Metliod Based on Combined Forward Conical Can-Backward Straight Can Extrusion. Journal of tribology, Vol. 120, No. 4, pp. 716-723, 1998.

[10] Velu R. and Cecil M., Quantifying Interfacial Friction in Cold Forming using Forward Rod Backward Cup Extrusion Test. Journal of The Institution of Engineers (India), Series C, Vol. 93, No. 2, pp. 157-161, 2012.

[11]Hafis S., Ridzuan M., Farahana R., Ayob A. and Syahrullail S., Paraffinic mineral oil lubrication for cold forward extrusion: Effect of lubricant quantity and friction. Tribology International, Vol. 60, pp. 111-115, 2013.

[12] Wang L., Zhou J., Duszczyk J. and Katgerman L. , Friction in aluminium extrusion—Part 1: A review of friction testing techniques for aluminium extrusion. Tribology International, Vol. 56, pp. 89-98, 2012.

[13] Wang L. and Yang H., Friction in aluminium extrusion—part 2: A review of friction models for aluminium extrusion. Tribology International, Vol. 56, pp. 99-106, 2012

[14] Donati L., Khalifa N.B., Tomesan L. and Tekkaya A.E., Comparison of different FEM code approaches in the simulation of the die deflection during aluminium extrusion. International Journal of Material Forming, Vol. 3, No. 1, pp. 375-378, 2010.

[15] Reggiani B., Donati L. and Tomesani L.,  Evaluation of different FE simulation codes in the stress analysis of extrusion dies. International Journal of Material Forming, Vol. 3, No. 1, pp. 395-398, 2010.