بررسی عددی تأثیر نایکنواختی جریان هوا، ابعاد هندسی و پروفایل پره بر انتقال گرمای رادیاتورهای کروگیت با پره کرکره‌ای و لوله تخت و معرفی یک پروفایل بهبودیافته

[1]           Kurland, C. N., Computer Program for Engine Cooling Radiator Selection. SAE Technical Paper, Report No. 0148-7191, 1971.

[2]           Park, Y. G. and Jacobi, A. M., Air-side heat transfer and friction correlations for flat-tube louver-fin heat exchangers. Journal of Heat Transfer, Vol. 131, No. 2, p. 021801, 2009.

[3]           Uhl, B., Brotz, F., Fauser, J., and Krüger, U., Development of engine cooling systems by coupling CFD simulation and heat exchanger analysis programs. SAE Technical Paper, Report No. 0148-7191, 2001.

[4]           Ng, E. Y., Watkins, S., Johnson, P. W., and Mole, L., Measuring Local Time-Averaged Airflow Velocity through an Automotive Heat Exchanger, in Proceedings of the 14th Australasian Fluid Mechanics Conference, 2001.

[5]           Jahani, K. and Beigmoradi, S., Under-Hood Air Flow Evaluation of Pedestrian-Friendly Front-End Style Using CFD Simulation. SAE International Journal of Passenger Cars-Mechanical Systems, Vol. 7, No. 2, pp. 787-792, 2014.

[6]           Khaled, M., Mangi, F., El Hage, H., Harambat, F., and Peerhossaini, H., Fan air flow analysis and heat transfer enhancement of vehicle underhood cooling system–Towards a new control approach for fuel consumption reduction. Applied Energy, Vol. 91, No. 1, pp. 439-450, 2012.

[7]           Ruijsink, R., Hoorneman, J., and Mulders, C., The Measurement of the Distribution of the Airflow through a Radiator. SAE Technical Paper, Report No. 0148-7191, 1993.

[8]           Ng, E., Johnson, P., and Watkins, S., An analytical study on heat transfer performance of radiators with non-uniform airflow distribution, in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2005.

[9]           Knaus, H., Ottosson, C., Brotz, F., and Kuehnel, W., Cooling module performance investigation by means of underhood simulation. SAE Technical Paper, Report No. 0148-7191, 2005.

[10]         Ecer, A., Toksoy, C., Rubek, V., Hall, R., Gezmisoglu, G., Pagliarulo, V., et al., Air flow and heat transfer analysis of an automotive engine radiator to calculate air-to-boil temperature. SAE Technical Paper, Report No. 0148-7191, 1995.

[11]         Guler, K. G., Cetin, B., and Aksel, M. H., Simulation of Thermal Characteristics of Radiators using a Porous Model.Begel House Inc. 2014.

[12]         Shui-Chang, L., Li-Fu, L., and Yong, Z., Vehicle Radiators’ Performance Calculation and Improvement Based on the Coupling of Multi-scale Models Simulations. The Open Mechanical Engineering Journal, Vol. 8, No. 1, 2014.

[13]         Charyulu, D. G., Singh, G., and Sharma, J., Performance evaluation of a radiator in a diesel engine—a case study. Applied Thermal Engineering, Vol. 19, No. 6, pp. 625-639, 1999.

[14]         Schwentker, R., Winkler, J., Aute, V., and Radermacher, R., A simulation and design tool for flat tube, louvered-fin heat exchangers. SAE Technical Paper, Report No. 0148-7191, 2006.

[15]         Pérez-Segarra, C., Oliet, C., and Oliva, A., Thermal and fluid dynamic simulation of automotive fin-and-tube heat exchangers, Part 1: Mathematical model. Heat Transfer Engineering, Vol. 29, No. 5, pp. 484-494, 2008.

[16]         Jung, D. and Assanis, D. N., Numerical modeling of cross flow compact heat exchanger with louvered fins using thermal resistance concept. SAE Technical Paper, Report No. 0148-7191, 2006.

[17]         Kanefsky, P., Nelson, V. A., and Ranger, M., A systems engineering approach to engine cooling design. SAE Technical Paper, Report No. 0148-7191, 1999.

[18]         Incropera, F. P. and Dewitt, D. P., Introduction to heat transfer.Wiley, New York 1990.

[19]         Thome, J. R., Engineering data book III 2004.

[20]         Sahnoun, A. and Webb, R., Prediction of heat transfer and friction for the louver fin geometry. Journal of heat transfer, Vol. 114, No. 4, pp. 893-900, 1992.

[21]         Chang, Y.-J. and Wang, C.-C., A generalized heat transfer correlation for Iouver fin geometry. International Journal of heat and mass transfer, Vol. 40, No. 3, pp. 533-544, 1997.

[22]         Dong, J., Chen, J., Chen, Z., Zhang, W., and Zhou, Y., Heat transfer and pressure drop correlations for the multi-louvered fin compact heat exchangers. Energy Conversion and Management, Vol. 48, No. 5, pp. 1506-1515, 2007.

[23]         Kim, M.-H. and Bullard, C. W., Air-side thermal hydraulic performance of multi-louvered fin aluminum heat exchangers. International Journal of Refrigeration, Vol. 25, No. 3, pp. 390-400, 2002.

[24]         Wang, C.-C., Webb, R. L., and Chi, K.-Y., Data reduction for air-side performance of fin-and-tube heat exchangers. Experimental Thermal and Fluid Science, Vol. 21, No. 4, pp. 218-226, 2000.

[25]         Alshamani, K., Equations for physical properties of automotive coolants. SAE Technical Paper, Report No. 0148-7191, 2003.