تعیین عدد مدول نشست جانبو در خاک های رسی با استفاده از سرعت موج برشی (مطالعه موردی: شهر تبریز)

بلوری بزاز ج، فرخنده س، "برآورد نشست تحکیمی خاک­های رسی با استفاده از شبکه­های عصبی مصنوعی"، پنجمین کنگره ملی مهندسی عمران، دانشگاه فردوسی مشهد، ایران، 1389.

دریائی م، کاشفی­پور س م، احدیان ج، قبادیان ر، "مدل­سازی شاخص فشردگی خاک­های ریزدانه به کمک شبکه عصبی مصنوعی و مقایسه با سایر روابط تجربی"، نشریه آب و خاک، 24 (4)، 1389، 667-659.

هاشمی جوکار م،  میراثی س، رهنما ح "تعیین شاخص تراکم خاک­های رسی با استفاده از سیستم استنتاج فازی- عصبی انطباقی"، مجله عمران مدرس، دوره هفدهم شماره4، 1396 ،277-289.

Amiri SN, Esmaeily A, Mahouti A, “A Realistic Theory of Soils Consolidation.Geo-Frontiers”, 2014, 3828-3837.

American Society for Testing and Materials. ASTM D 2435-03, “Standard test method for one-dimensional consolidation properties of soils using incremental loading”, West Conshohocken, PA, USA. 2011.

American Society for Testing and Materials. ASTM D 854. Standard test method for specific gravity of soil solids by water pycnometer, West Conshohocken, PA, USA. 2014.

American Society for Testing and Materials. ASTM D 422-63, “Standard test method for particle size analysis of soils”, West Conshohocken, PA, USA. 2007.

American Society for Testing and Materials. ASTM D 2216, “Standard test method for laboratory determination of water (moisture) content of soil and rock by mass”, West Conshohocken, PA, USA. 1998.

American Society for Testing and Materials. ASTM D 4318-93, “Standard test method for liquid limit, plastic limit and plasticity index of soils”, West Conshohocken, PA, USA. 2004.

American Society for Testing and Materials ASTM D 2487-93. “Standard classification of soils for engineering purposes (unified soil classification system)”, West Conshohocken, PA, USA. 2011.

American Society for Testing and Materials ASTM D7400-08, “Standard Test Methods for Down hole Seismic Testing”, West Conshohocken, PA, USA. 2008.

Carrol RA, “Use of CRS test to predict settlement in an Irish silt”, University College, Dublin, Ireland, 2007.

Fam M, Santamarina JC, “Study of Consolidation Uing Mechanical and Electromagnetic Waves”, Geotechnique, 1997, 47 (2), 203-249.

Fellenius BH, “Basics of Foundation Design”, Electronic Edition, www.Fellenius.net, 2006, 275.

Hooshmand A, Aminfar MH, Asghari E, Ahmadi H, “Mechanical and Physical Characterization of Tabriz Marls, Iran. Geotechnical Geology Engineering”, 2012, 30, 219-232.

Kalantary F, Kordnaij A, “Prediction of compression index using artificial neural network. Scientific”, Research and Essays, 2012, 7 (31), 2835-2848.

Knusen M, “On Determination of Gmax by Bender Element and Cross-Hole Testing”, Norwegian University of Science and Technology, Department of Civil and Transport Engineering, Master Thesis, 2014.

Landon M M, DeGroot D J, Sheahan TC, “Nondestructive Sample Quality Assessment of a Soft Clay Using Shear Wave Velocity”, American Society of Civil Engineers, ISSN (online), Journal of Geotechnical and Geoenvironmental Engineering, 2007, 424-432.

L’Heureux JS, “Correlations between shear wave velocity and geotechnical parameters in Norwegian clays”, Proceedings of the 17^th Nordic Geotechnical meeting Challenges in Nordic Geotechnic, 2016, 299-308.

L'Heureux JS, Long M, Vanneste M, Sauvin G, Hansen L, Polomf U, Lecomte I, Dehls J, Janbu N, “On the prediction of settlement from high-resolution shear-wave reflection seismic data: The Trondheim harbour case study, mid Norway”, Engineering Geology, 2013, 167, 72-83.

Likitlersuang S, Teachavorasinskun S, Surarak C, Oh E, Balasubramaniam A, “Small strain stiffness and stiffness degradation curve of Bangkok Clays”, Soils and Foundations, 2013, 53 (4), 498-509.

Long M, Donohue S, “Characterization of Norwegian marine clays with combined shear wave velocity and Piezocone cone penetration test (CPTU)”, Canadian Geotechnical Journal, 2010, 47 (7), 709-718.

Mandar PK, Patel A, Simgh DN, “Application of Shear Wave Velocity for Characterizing Clays from Coastal Regions.” KSCE Journal of Civil Engineering, 2010, 14 (3), 307-321.

Mayne PW, Rix GJ, “Gmax-qcrelationships for clays”, Geotechnical Testing Journal, 1993, 16 (1), ASTM, 54-60.

Nishimura S, “Laboratory Study on anisotropy of natural London Clay”, Department of Civil and Environmental Engineering Imperial College London, Doctor of Philosophy thesis. 2005.

Nor Omara M, Abbiss CP, Taha MR, Anuar K, Nayan M, “Prediction of long-term settlement on soft clay using shear wave velocity and damping characteristics”, Engineering Geology, 2011, 123, 259-270.

Noutash MK, Dabiri R, Hajialilue Bonab M, “The Evaluation of Soil Liquefaction Potential Using Shear Wave Velocity Based on Empirical Relationships”,Interbational Journal of Engineering, 2012, 6 (4), 218-232.

Ozer M, Isik NS, Orhan M, “Statistical and neural network assessment of the compression index of clay- bearing soils”, Bulletin of Engineering Geology and Environmental, 2008, 67, 537-545.

Park HI, “Evaluation of the compression index of soils using an artificial neural network”, Computers and Geotechnics 38, 2011, 472-481.

Tong L, Liu L, Cai G, Du G, “Assessing the coefficient of the earth pressure at rest from shear wave velocity and electrical resistivity measurements”, Engineering Geology, 2013, 163, 122-131.

Yang G, Luo Y, Zhang Y, Wang E, “Application of the tangent modulus method in nonlinear settlement analysis of sand foundation”, Proceedings of the 18^th International Conference on Soil Mechanic and Geotechnical Engineering, Paris, 2013.

Yilmaz I, Erzin Y, “On the reliability of SPT-N value as an indication of consistency of clayey soils”, Electronic Journal of Geotechnical Engineering, Published Onlin, 2004.

Yoon H, Lee C, Kim H, Lee JS, “Evaluation of preconsolidation stress by shear wave velocity”, Smart Structures and Systems, 2011, 7 (4), 275-287.