مطالعه عددی آیرودینامیک شعله در کوره‌های دوار

[1]      Boateng A. A., Rotary kilns: transport phenomena and transport processes: Butterworth-Heinemann, 2015.

[2]     Elatta H.r, Specht E., Fouda, A. S. Bin-Mahfouz, CFD modeling using PDF approach for investigating the flame length in rotary kilns, Heat and Mass Transfer, Vol. 52, No. 12, pp. 2635-2648, 2016.

[3]     Peray, Kurt E., and Joseph J. Waddell. The rotary cement kiln. Vol. 139. Edward Arnold, 1986.

[4]     Elattar H., Stanev R., Specht E., Fouda A., CFD simulation of confined non-premixed jet flames in rotary kilns for gaseous fuels, Computers & Fluids, Vol. 102, pp. 62-73, 2014.

[5]     Jenkins B., Mullinger P., Industrial and process furnaces: principles, design and operation: Butterworth-Heinemann, 2011.

[6]     Alyaser A. H., Fluid flow and combustion in rotary kiln,  Thesis, University of British Columbia, 1998.

[7]     Mastorakos E., Massias A., Tsakiroglou C., Goussis D., Burganos V., Payatakes A., CFD predictions for cement kilns including flame modelling, heat transfer and clinker chemistry, Applied Mathematical Modelling, Vol. 23, No. 1, pp. 55-76, 1999.

[8]     Mujumdar K. S., Ranade V. V., CFD modeling of rotary cement kilns, Asia‐Pacific Journal of Chemical Engineering, Vol. 3, No. 2, pp. 106-118, 2008.

[9]     Liu X. Y., Specht E., Temperature distribution within the moving bed of rotary kilns: Measurement and analysis, Chemical Engineering and Processing: Process Intensification, Vol. 49, No. 2, pp. 147-150, 2010.

[10]  Macphee J., Sellier M., Jermy M., Tadulan E., Combustion modelling of a rotary limekiln, Progress in Computational Fluid Dynamics, an International Journal, Vol. 10, No. 5-6, pp. 384-393, 2010.

[11]  Li G., Liu J., Xiong H., Kong J.,. Gao Z, Xiao W., Zhang Y., Cheng F., Numerical Simulation of Airflow Temperature Field in Rotary Kiln, Sensors & Transducers, Vol. 161, No. 12, pp. 271, 2013.

[12]  Rahimpour M., Mazaheri K., Seyedein S. H., Numerical Study of the Effect of Burner Angle on Melting Rate in an Aluminum Rotary Furnace, Modares Mechanical Engineering, Vol. 14, No. 16, 2015.

[13]  Elattar H. F., Specht E., Fouda A., Bin‐Mahfouz A. S., Study of parameters influencing fluid flow and wall hot spots in rotary kilns using CFD, The Canadian Journal of Chemical Engineering, Vol. 94, No. 2, pp. 355-367, 2016.

[14]  Spadaccini L. J., Owen F. K., Bowman C. T., Influence of aerodynamic phenomena on pollutant formation in combustion: Environmental Protection Agency, Office of Research and Development, 1979.

[15]  Pierce C. D., Progress-variable approach for large-eddy simulation of turbulent combustion,  Thesis, stanford university, 2001.

[16]  Davies P. R., Norton M. J., Wilson D. I., Davidson J. F., Scott D. M., Gas flow in rotary kilns, Particuology, Vol. 8, No. 6, pp. 613-616, 2010.

[17]  Poinsot T., Veynante D., Theoretical and numerical combustion: RT Edwards, Inc., 2005.

[18]  Gutierrez L., Tamagno J. P., Elaskar S. A., RANS Simulation of Turbulent Diffusive Combustion using Open Foam, JOURNAL OF APPLIED FLUID MECHANICS, Vol. 9, No. 2, pp. 669-682, 2016.

[19]  Nejad M. S., Fundamental of Turbulent Flowsand Turbulence Modeling: daneshnegar, 2009 (in Persian).

[20]  Heidarinejad G., An Introduction to Turbulence: Tarbiat Modares University, 2008(in Persian).

[21]  https://www.sharcnet.ca/Software/Fluent6/html/ug/node480.htm, Accessed (2016/09/21).

[22]  Correa S. M., Turbulence-chemistry interactions in the intermediate regime of premixed combustion, Combustion and Flame, Vol. 93, No. 1-2, pp. 41-60, 1993.

[23]  Chen J.-Y., Stochastic modeling of partially stirred reactors, Combustion Science and Technology, Vol. 122, No. 1-6, pp. 63-94, 1997.

[24]  Chen J., Development of reduced mechanisms for numerical modelling of turbulent combustion, in Proceeding of.

[25]  Chomiak J., Karlsson A., Flame liftoff in diesel sprays, in Proceeding of, Elsevier, pp. 2557-2564.

[26]  Nordin P., Complex chemistry modeling of diesel spray combustion: Chalmers University of Technology, 2001.

[27]  Golovitchev V., Chomiak J., Numerical Modeling of high Temperature Air ‘Flameless Combustion,’ in Proceeding of, 27-30.

[28]  Guessable A., Airs A., I. Go alp, Heal F. T., RANS Simulation of Methane Diffusion Flame: Comparison of Two Chemical Kinetics Mechanisms: Comparison of Two Chemical Kinetics Mechanisms, Journal of Physical Science and Application, Vol. 3, No. 6, pp. 400-408, 2013.

[29]  Modest M. F., Radiative heat transfer: Academic press, 2013.

[30]  Kadar A. H., Modelling Turbulent Non-Premixed Combustion in Industrial Furnaces, 2015.

[31]  https://www.sharcnet.ca/Software/Fluent6/html/ug/node416.htm#sec-rotate-equations, Accessed(2016/09/21).

[32] Ghasemi E., Soleimani S., Lin C., RANS simulation of methane-air burner using local extinction approach within eddy dissipation concept by OpenFOAM, International Communications in Heat and Mass Transfer, Vol. 54, pp. 96-102, 2014.