ارائه روش اندازه‌گیری سریع جهت بهره‌برداری بهینه ظرفیت SVC به منظور کاهش فلیکر کوره‌های قوس الکتریکی

[1] H. Samet, and A. Mojallal, “Enhancement of electric arc furnace reactive power compensation using Grey-Markov prediction method,” IET Gener. Transm. Distrib., vol. 8, no. 9, pp. 1626–1636, 2014.

[2] H. Samet, and M. Parniani, “Predictive method for improving svc speed in electric arc furnace compensation,” IEEE Trans. Power Del., vol. 22, no. 1, pp. 732–734, 2007.

[3] M. A. Gomez-Martinez, A. Medine, and C. R. Fuerte-Esquivel, “Ac arc furnace stability analysis based on bifurcation theory,” IEE Proc.-Gener. Transm. Distrib., vol. 153, no. 4, pp. 463–468, 2006.

[4] M. Cernan, and J. Tlusty, “Study of the susceptance control of industrial Static VAr Compensator,” 2015 16th International Scientific Conference on Electric Power Engineering (EPE), pp. 538–541, 2015

[5] T. J. E. Miller, “Reactive power control in electric systems,” John-Wiley, 1982.

[6] L. Tey, P. So, and Y. Chu, “Improvement of power quality using adaptive shunt active filter,” IEEE Trans. Power Del., vol. 20, no. 2, pp. 1558–1568, 2005.

[7] J. M. Gonzalez, C. A. Canizares, and J. M. Ramoirez, “Stability modeling and comparative study of series vertical compensators’, IEEE Trans. on Power Del., vol. 25, no. 2, pp. 1093–1103, 2010.

[8] P. K. Dash, S. Morris, and S. Mishra, “Design of a nonlinear variable gain fuzzy controller for FACTS devices,” IEEE Trans. on Control Syst. Tech., vol. 12, no. 3, pp. 428–438, 2004.

[9] C. F. Lu, and C. F. Juang, “Evolutionary fuzzy control of flexible ac transmission system,” IEE Proc.-Gener., Transm. Distrib., vol. 152, no. 4, pp. 441-448, 2005.

[10] C. F. Lu, C. H. Hsu, and C. F. Juang, “Coordinated control of flexible ac transmission system device using an evolutionary fuzzy lead-lag controller with advanced continuous ant colony optimization,” IEEE Trans. Power Syst., vol. 28, no. 1, pp. 385–392, 2012.

[11] G. Carpinelli, F. Iacovone, A. Russo and P. Varilone, “Chaos-based modeling of dc arc furnaces for power quality issues’, IEEE Trans. Power Del., vol. 19, no. 4, pp. 1869–1876, 2004.

[12] G. Carpinelli, F. Iacovone, A. Russo and P. Varilone, “A new frequency domain approach for flicker planning studies,” IEEE Trans. Power Del., vol. 18, no. 2, pp. 631–638, 2003.

[13] N. Gibo, K. Yukihira, K. Deno, and Y. Nagasaka, “Reduction of svc capacity by flicker control using parallel band-pass filters,” 14th International Conference on Harmonics and Quality of Power (ICHQP), pp. 1–6, Sep. 2010.

[14] J. Guo, X. Xiao, and T. Shun, “Discussion on instantaneous reactive power theory and currents physical component theory,” 15th Int. Conf. on Harmonics and Quality of Power (ICHQP), pp. 427–432, 2012.

[15] H. Samet, I. Masoudipour, and M. Parniani, “New reactive power calculation method for electric arc furnaces,” Measurement, vol. 81, pp. 251–263, 2016.

[16] Y. J. Hsu, K. H. Chen, P. Y. Huang, and C. N. Lu, “Electric arc furnace voltage flicker analysis and prediction,” IEEE Trans. Instrum. Meas., vol. 60, no. 10, pp. 3360–3368, 2011.

[17] D. B. Kulkarni, and G. R. Udupi, “ANN-Based SVC Switching at Distribution Level for Minimal-Injected Harmonics,” IEEE Trans. on Power Del., vol. 25, no. 3, pp. 1978–1985, 2010.

[18] M. Asban, J. Aghaei, T. Niknam and M. Akbari, “Designing Static Var Compensator capacity to enhance power quality in electric arc furnaces,” Simulation: International Transaction of the Socitey for Modeling and Simulation, vol. 93, no. 6, pp. 515-525, 2017.

[19] T. L. Morello, S. Dionise, and T. J. Mank, “Comprehensive analysis to specify a static VAr compensator for an electric arc furnace upgrade,” IEEE Trans. Ind. Appl., vol. 51, no. 6, pp. 4840–4852, 2015.

[20] T. J. Dionise, “Assessing the performance of a static VAr compensator for an electric arc furnace’, IEEE Transactions on Industry Applications, vol. 50, no. 3, pp. 1619–1629, 2014.