بهینه‌سازی حساسیت خط مرجع ولتاژ کم‌توان با استفاده از ساختار نوین دوطبقه در زیرآستانه

[1] B.Razavi, Design of Analog CMOS Integrated Circuits. New York McGraw-Hill Education 2017.

[2] T. C. Carusone, A. David, D. A. J. Tony Chan Carusone, W. M. Kenneth, B. E. B. E. Bürdek, P. R. H. Gray, et al., "Analog integrated circuit design," in WORKSHOP on VLSI Signal Processing (1986: Los Angeles, US), 2012.

[3] نظری و یاوند حسنی، «طراحی یک تقویت‌کننده کم‌نویز کسکود ولتاژ پایین با خطینگی بالا به کمک روش تزویج مغناطیسی در باند GHz45»، مجله مهندسی برق دانشگاه تبریز، دوره 47، شماره 2، صفحه 760-751، تابستان 1396.

[4] پروین، محمدپور و امیدوار، «ارائه روشی مبتنی بر پوشش سراسری و تخمین اتفاق آرا برای بهبود کارایی در شبکه حسگر بی‌سیم»، مجله مهندسی برق دانشگاه تبریز، 1395.

[5] A. Wang and A. Chandrakasan, "A 180-mV subthreshold FFT processor using a minimum energy design methodology," IEEE Journal of solid-state circuits, vol. 40, pp. 310-319, 2005.

[6] S.-C. Luo and L.-Y. Chiou, "A sub-200-mV voltage-scalable SRAM with tolerance of access failure by self-activated bitline sensing," IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 57, pp. 440-445, 2010.

[7] I. Filanovsky and A. Allam, "Mutual compensation of mobility and threshold voltage temperature effects with applications in CMOS circuits," IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, vol. 48, pp. 876-884, 2001.

[8] H. Banba, H. Shiga, A. Umezawa, T. Miyaba, T. Tanzawa, S. Atsumi, et al., "A CMOS bandgap reference circuit with sub-1-V operation," IEEE Journal of Solid-State Circuits, vol. 34, pp. 670-674, 1999.

[9] Y. Yang, D. M. Binkley, L. Li, C. Gu, and C. Li, "All-CMOS subbandgap reference circuit operating at low supply voltage," in Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, pp. 893-896, 2011.

[10] B.-D. Yang, "250-mV supply subthreshold CMOS voltage reference using a low-voltage comparator and a charge-pump circuit," IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 61, pp. 850-854, 2014.

[11] G. De Vita and G. Iannaccone, "A Sub-1-V, 10 ppm/˚C, Nanopower Voltage Reference Generator," IEEE Journal of Solid-State Circuits, vol. 42, pp. 1536-1542, 2007.

[12] L. Magnelli, F. Crupi, P. Corsonello, C. Pace, and G. Iannaccone, "A 2.6 nW, 0.45 V temperature-compensated subthreshold CMOS voltage reference," IEEE Journal of Solid-State Circuits, vol. 46, pp. 465-474, 2011.

[13] D. Albano, F. Crupi, F. Cucchi, and G. Iannaccone, "A Sub-kT/q Voltage Reference Operating at 150 mV," IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 23, pp. 1547-1551, 2015.

[14] H. Luo, Y. Han, R. C. Cheung, G. Liang, and D. Zhu, "Subthreshold CMOS voltage reference circuit with body bias compensation for process variation," IET circuits, devices & systems, vol. 6, pp. 198-203, 2012.

[15] P. Kinget, C. Vezyrtzis, E. Chiang, B. Hung, and T. Li, "Voltage references for ultra-low supply voltages," IEEE Custom Integrated Circuits Conference, pp. 715-720, 2008.

[16] A. Boni, "Op-amps and startup circuits for CMOS bandgap references with near 1-V supply," IEEE Journal of Solid-State Circuits, vol. 37, pp. 1339-1343, 2002.

[17] A.-J. Annema, P. Veldhorst, G. Doornbos, and B. Nauta, "A sub-1V bandgap voltage reference in 32nm FinFET technology," IEEE Solid-State Circuits Conference-Digest of Technical Papers, pp. 332-333, 2009.

[18] Y. Wang, Z. Zhu, J. Yao, and Y. Yang, "A 0.45-V, 14.6-nW CMOS subthreshold voltage reference with no resistors and no BJTs," IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 62, pp. 621-625, 2015.