شبیه‌سازی عددی شکست در مواد ترد با استفاده از روش اجزاء محدود توسعه‌یافته

] Griffith A.A., The phenomenon of rupture and flow in solids, philosophical transactions, Vol. 221, pp. 163-198, 1920.

[2] Irwin G.R., Analysis of stress and strains near the end of a crack traversing a plate, Applied Mechanics, Vol. 24, pp. 109-114, 1957.

[3] Rice J.R., Path-independent integral and the approximate analysis of strain concentration by notches and crack, Applied Mechanics Transactions Vol. 35, pp. 379-386, 1968.

[4] Barenblatt G., The matematical theory of equilibrium cracks in brittle fracture, Advances in Applied Mechechanics, Vol. 7, pp. 55-129, 1962.

[5] Hillerborg A.,Modeer M., Petersson P., Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cement and Concrete Research, Vol. 6, pp. 773-782, 1976.

[6] Carter B.J., Lajtai E.Z., Ayari M.L., Criteria for brittle fracture in compression, Engineering Fracture Mechanics, Vol. 37, pp. 59-74, 1990.

[7] Fischer K.F., Review of brittle fracture criteria in case of static and cyclic mixed mode loading, Theoretical and Applied Fracture Mechanics, Vol. 1, pp. 117-131, 1984.

[8] Belytschko T., Black T., Elastic crack growth in finite elements with minimal remeshing, Numerical Method in Engineering, Vol. 45, pp. 601-620, 1999.

[9] Kurek M., Walat K., Ogonowski C., Lagoda T., The multiaxial random fatigue criteria based on strain and energy damage parameters on the critical plane for the low-cycle range, International Journal of Fatigue, Vol. 37, pp. 100-111, 2012.

 [10] Torabi A.R., Pirhadi E., Stress-based criteria for brittle fracture in key-hole notches under mixed mode loading, European Journal of Mechanics and Solids, Vol. 49, pp. 1-12, 2014.

[11] Torabi A.R., Firoozabadi M., Ayatollahi M.R.,Brittle fracture analysis of blunt V-notches under compression, International Journal of Solids and Structures, Vol. 67-68, pp. 219-230, 2015.

[12] Saboori B., Ayatollahi M.R., Torabi A.R., Berto F., Mixed mode I/III brittle fracture in round-tip V-notches, Theoretical and Applied Fracture Mechanics, Vol. 83, pp. 135-151, 2016.

[13] Moes N., Dolbow J., Belytschko T., A finite element method for crack growth without remeshing, Numerical Method in Engineering, Vol. 149, pp. 131- 150, 1999.

[14] Mohammadi B., Salimi-Majd D., Ali-Bakhshi M.H., Analysisofcomposite skin/stringer debonding and failure under static loading using cohesive zone model, Mechanical Engineering of Modares, Vol. 14, pp. 17-25, 2014. (In persian)

[15] ABAQUS6.14 Help Documentation.ABAQUS theory manual.

[16] Salimi-Majd D., Investigation of delamination in laminated composites under fatigue loading using the cohesive interface element, Msc thesis, School of Mechanical Engineering, Iran University of Science and Technology, 2013. (In persian)

[17] Balzani C., Wagner W., An interface element for the simulation of delamination in unidirectional fiber-reinforced composite laminates, Engineering Fracture Mechanics, Vol. 75, pp. 2597-2615, 2008.

[18] Lazzarin P., Berto F., Ayatollahi A.R., Brittle failure of iInclined key-hole notches in isostatic graphite under in-Plane mixed mode loading,Fatigue and Fracture of Engineering Materials and Structures, Vol. 36, pp. 942-955, 2013.

[19] Berto F., Ayatollahi M.R., Fracture assessment of brazilian disc specimens weakened by blunt V-notches under mixedmode loading by mean of local energy, Materials and Design, Vol. 32, pp. 2858-2869, 2011.

[20] Ayatollahi M.R., Torabi A.R., Failure assessment of  

        notched polycrystalline graphite under tensile-shear loading, Materials Science Engineering, Vol. 528, pp. 5685-5695, 2011.