بررسی تحلیلی اثر تغییر شدت چرخش جریان هوای ورودی بر رفتار دینامیکی جریان، دما و شار گرمایی تابشی مشعل هارول

[1] H. Tsuji, A. K. Gupta, T. Hasegawa, M. Katsuki, K. Kishimoto, and M. Morita, High temperature air combustion: from energy conservation to pollution reduction: CRC press, 2002.

 [2]J. Lewtas, "Air pollution combustion emissions: characterization of causative agents and mechanisms associated with cancer, reproductive, and cardiovascular effects," Mutation Research/Reviews in Mutation Research, vol. 636, pp. 95-133, 2007.

[3] X. Xu, C. Chen, H. Qi, R. He, C. You, and G. Xiang, "Development of coal combustion pollution control for SO 2 and NO x in China," Fuel Processing Technology, vol. 62, pp. 153-160, 2000.

[4] A. Frassoldati, S. Frigerio, E. Colombo, F. Inzoli, and T. Faravelli, "Determination of NOx emissions from strong swirling confined flames with an integrated CFD-based procedure," Chemical Engineering Science, vol. 60, pp. 2851-2869, 2005.

[5] H. Poorhoseinni, A. Saeedi, and M. Moghiman, "Experimental and numerical investigation of the inlet air swirl angle effects on temperature profile and CO, NO pollutants," Energy Engineering Management, vol. 2, pp. 32-39, 2012.

[6] L. Zhou, X. Chen, and J. Zhang, "Studies on the effect of swirl on no formation in methane/air turbulent combustion," Proceedings of the Combustion Institute, vol. 29, pp. 2235-2242, 2002.

[7] R. K. Cheng, "Low swirl combustion," The Gas Turbine Handbook, pp. 241-255, 2006.

[8] K. Bashirnezhad, M. Moghiman, and M. Mousavi, "On the Dependence of Soot formation and Combustion on swirling combustion Furnaces: Measurement and Simulation," JAST-TEHRAN-, vol. 3, p. 205, 2006.

[9] F. Bonatesta, A. La Rocca, P. Shayler, and E. Wahab, "The influence of swirl ratio on soot quantity and distribution in the cylinder of a diesel engine," in Third European Combustion Meeting ECM, 2007.

[10] M. E. Feyz, S. I. Pishbin, M. Ghazikhani, and S. M. Razavi, "Parametric assessment of a low-swirl burner using the exergy analysis," Energy, vol. 79, pp. 117-126, 2015.

[11] Y. Huang and V. Yang, "Dynamics and stability of lean-premixed swirl-stabilized combustion," Progress in Energy and Combustion Science, vol. 35, pp. 293-364, 2009.

[12] N. Wilkes, P. Guilbert, C. Shepherd, S. Simcox, H. C. S. UKAEA Atomic Energy Research Establishment, S. Div., et al., The application of HARWELL-FLOW3D to combustion problems: UKAEA Atomic Energy Research Establishment Computer Science and Systems Division, 1989.

[13] E. Keramida, H. Liakos, M. Founti, A. Boudouvis, and N. Markatos, "Radiative heat transfer in natural gas-fired furnaces," International Journal of Heat and Mass Transfer, vol. 43, pp. 1801-1809, 2000.

[14] N. Syred and J. Beer, "Combustion in swirling flows: a review," Combustion and flame, vol. 23, pp. 143-201, 1974.

[15] B. F. Magnussen and B. H. Hjertager, "On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion," Symposium (International) on Combustion, vol. 16, pp. 719-729, 1977.

[16] A. Fluent, "14.5, Theory Guide; ANSYS," Inc., Canonsburg, PA, 2012.

[17] M. Ilbas, "The effect of thermal radiation and radiation models on hydrogen–hydrocarbon combustion modelling," International Journal of Hydrogen Energy, vol. 30, pp. 1113-1126, 2005.

[18] I. Yılmaz, "Effect of swirl number on combustion characteristics in a natural gas diffusion flame," Journal of Energy Resources Technology, vol. 135, p. 042204, 2013.