پیش‌بینی عملکرد پمپ گریز از مرکز به‌عنوان توربین و تأثیر پره‌های جداکننده

[1] Gleick H., Peter Water and energy, Annual review of energy and the environment 19, No. 1, pp. 267-299, 1994.

[2] S. Sheng Yang, K. Fan-Yu, Fu Jian-Hui X. Ling, Numerical research on effects of splitter blades to the influence of pump as turbine, International Journal of Rotating Machinery, Vol. 2012, 2012.

[3] Chapallaz Jean-Marc, P., Eichenberger G., Fischer Manual on pumps used as turbines, 1992.

[4] Amelio, Mario S., Barbarelli, A one-dimensional numerical model for calculating the efficiency of pumps as turbines for implementation in micro-hydro power plants, In ASME 7th Biennial Conference on Engineering Systems Design and Analysis, American Society of Mechanical Engineers, pp. 65-72. 2004.

[5] Singh, Punit, F. Nestmann, An optimization routine on a prediction and selection model for the turbine operation of centrifugal pumps, Experimental Thermal and Fluid Science, 34, No. 2, pp. 152-164, 2010.

[6] S. Derakhshan, A. Nourbakhsh, Experimental study of characteristic curves of centrifugal pumps working as turbines in different specific speeds, Experimental thermal and fluid science, 32, No. 3,pp.: 800-807, 2008.

[7] Sharma K., Small hydroelectric project-use of centrifugal pumps as turbines, Technical Report, Kirloskan Electric Co., Bangalore, India, 1985.

[8] Wong W., Application of centrifugal pumps for powers generation, World Pump, pp. 348–381, 1987.

[9]Ramos H., and Borga A.. Pumps as turbines: an unconventional solution to energy production, Urban Water, Vol. 1, No. 3, pp. 261-263, 1999.

[10] Derakhshan S., Nourbakhsh A., Theoretical, numerical and experimental investigation of centrifugal pumps in reverse operation, Experimental Thermal and Fluid Science, Vol. 32, No. 8, pp.1620-1627, 2008.

[11] Anderson H., Modern developments in the use of large single-entry centrifugal pumps, Proceedings of the Institution of Mechanical Engineers, Vol. 169, No. 1, pp. 141-161, 1955.

[12] Derakhshan S., Mohammadi B., Nourbakhsh A., Efficiency improvement of centrifugal reverse pumps, Journal of Fluids Engineering, Vol. 131, No. 2, pp. 021103, 2009.

[13] Derakhshan S., Mohammadi B., Nourbakhsh A., The comparison of incomplete sensitivities and Genetic algorithms applications in 3D radial turbo machinery blade optimization, Computers & Fluids, Vol. 39, No. 10, pp. 2022-2029, 2010.

[14] Singh, Punit, and Franz Nestmann. Internal hydraulic analysis of impeller rounding in centrifugal pumps as turbines, Experimental Thermal and Fluid Science, Vol. 35, No. 1, pp. 121-134, 2011.

[15] Yang, Sun-Sheng, Chao Wang, Kai Chen, and Xin Yuan, Research on Blade Thickness Influencing Pump as Turbine, Advances in Mechanical Engineering, Vol. 2014, 2014.

 [16] Kergourlay G., Younsi M., Bakir F., Rey R., Influence of splitter blades on the flow field of a centrifugal pump: test-analysis comparison, International Journal of Rotating Machinery, Vol. 2007, 2007.

[17] Gölcü M., Pancar Y., Sekmen Y., Energy saving in a deep well pump with splitter blade, Energy Conversion and Management, Vol. 47, No. 5,
pp. 638-651, 2006.

 [18] Shigemitsu T., Fukutomi J., Wada T., Shinohara H., Performance analysis of mini centrifugal pump with splitter blades, Journal of Thermal Science, Vol. 22, No. 6, pp. 573-579, 2013.

[19] Shigemitsu T., Fukutomi J., Kaji K., Wada T., Performance and internal flow condition of mini centrifugal pump with splitter blades, in Proceeding of  IOP Conference Series: Earth and Environmental Science, IOP Publishing, Vol. 15, No. 7, pp. 072001, 2012.

 [20] Li W.-G., Analysis of flow in extreme low specific speed centrifugal pump impellers with multi-split-blade, International Journal of Turbo and Jet Engines, Vol. 23, No. 2, pp. 73-86, 2006.

[21] Hou Y., Li R., Zhang J., Research on the Length Ratio of Splitter Blades for Ultra-high Head Francis Runners,Procedia  Engineering,Vol.31,pp.9296,2012.

 [22] Sun-Sheng, Yang, Kong Fan-Yu, Fu Jian-Hui, and Xue Ling, Numerical research on effects of splitter blades to the influence of pump as turbine, International Journal of Rotating Machinery, Vol. 2012, 2012.

[23] Ehghaghi M. B., Vajdi M., Numerical and Experimental Study of splitter blades effect on the centrifugal pump performance, Modares Mechanical Engineering, Vol. 15, No. 3, pp. 398-410, 2014. (In Persian)

[24] Elder R., Tourlidakis A., Yates M., Advances of CFD in fluid machinery design, John Wiley & Sons, 2003.

[25] Shojaeefard M., Tahani M., Ehghaghi M., Fallahian M., Beglari M., Numerical study of the effects of some geometric characteristics of a centrifugal pump impeller that pumps a viscous fluid, Computers & Fluids, Vol. 60, pp. 61-70, 2012.

[26]Menter F.R.,Two-equationeddy-viscosityturbulencemodelsforengineering applications,AIAAjournal,Vol.32,No.8,pp.1598-1605, 1994.

[27] Spence R., Amaral-Teixeira J., A CFD parametric study of geometrical variations on the pressure pulsations and performance characteristics of a centrifugal pump, Computers & Fluids, Vol. 38, No. 6, pp. 1243-1257, 2009.

[28] Stickland M. T., Scanlon T. J., Blanco-Marigorta E., Fernandez-Francos J., González-Pérez J., Santolaria-Morros C., Numerical flow simulation in centrifugal pump with impeller-volute interaction, in Proceeding of ASME, pp.147-154, 2010.

[29] A. J. Stepanoff, Centrifugal and axial flow pumps, 1948.

[30] Šavar M., Hrvoje  K. and Sutlović I.. Improving centrifugal pump efficiency by impeller trimming. Desalination 249, No. 2, pp. 654-659, 2009.

[31] Yang W., Xiao R., Wang F., Wu Y., Influence of splitter blades on the cavitation performance of a double suction centrifugal pump, Advances in Mechanical Engineering, Vol. 2014, 2014.