ارزیابی پارامترهای خوردگی آرماتورها جهت تحلیل احتمالاتی تیرهای بتن مسلح

Ahmad S, “Reinforcement corrosion in concrete structures, its monitoring and service life prediction–A review”. Cement and Concrete Composite, 2003, 25, 459-71.

 Bastidas-Arteaga, E, Bressolette P, Chateauneuf AL, Sonchez-Silva M, “Probabilistic lifetime assessment of RC structures under coupled corrosion–fatigue deterioration processes”. Structural Safety, 2009, 31, 84–96.

Bhargava K, Mori Y, Ghosh AK, “Time-dependent reliability of corrosion-affected RC beams-Part 1: Estimation of time-dependent strengths and associated variability”. Nuclear Engineering and Design, 2011, 241, 1371–1384.

Dai H, Wang W, “Application of low-discrepancy sampling method in structural reliability analysis”. Structural Safety, 2009, 31, 55–66.

Darmawan MS, “Pitting corrosion model for reinforced concrete structures in a chloride environment”. Magazine of Concrete Research, 2010, 62(2), 91–101.

Dhillon BS, “Reliability, Quality, and Safety for Engineers”, CRC Pres, 2005.

Enright MP, Frangopol DM, “Probabilistic analysis of resistance degradation of reinforced concrete bridge beams under corrosion”. Engineering Structures, 1998, 20 (11), 960–971.

Gonzalez JA, Andrade C, Alonso C, Feliu S, “Comparison of rates of general corrosion and maximum pitting penetration on concrete embedded steel reinforcement”. Cement and Concrete Research, 1995, 25(2), 257-264.

Gupta SP, “Statistical Method”, New Delhi, 1997.

Li C, Yang S, Saafi M, “Numerical simulation of behavior of reinforced concrete structures considering corrosion effects on bonding”, Journal of Structural Engineering, 2014, 140(12), 04014092.

Mohammadi Farsani A, Keshtegar B, “Reliability analysis of corroded reinforced concrete beams using enhanced HL-RF method”, Civil Engineering Infrastructures Journal, 2015, 48(2), 297-304.

Nowak AS, Collins KR, “Reliability of Structures”, McGraw-Hill, 2000.

Pellizzer GP, Leonel ED, Nogueira CG, “Influence of reinforcement’s corrosion into hyperstaticreinforced concrete beams: a probabilistic failure scenarios analysis”, IBRACON Structures and Materials Journal, 2015, 8 (4), 479-490.

Rodriguez J, Ortega LM, Casal J, Diez JM, “Corrosion of reinforcement and service life of concrete structures”. Durability of Building Materials and Components 1996, 7 (1), 117–126.

Rohatgi VK, Ehsanes SAK, “Introduction to probability and statistics”. Macmillan published Company, New York, 2001.

Stewart MG, “Mechanical behaviour of pitting corrosion of flexural and shear reinforcement and its effect on structural reliability of corroding RC beams”. Structural Safety, 2009, 31, 19-30.

Stewart MG, “Spatial variability of pitting corrosion and its influence on structural fragility and reliability of RC beams in flexure”. Structural Safety, 2004, 26(4), 453–70.

Stewart MG, Al-Harthy A, “Pitting corrosion and structural reliability of corroding RC structures, experimental data and probabilistic analysis”. Reliability Engineering and System Safety, 2008, 93(3), 273–382.

Stewart MG, Rosowsky DV, “Time-dependent reliability of deteriorating reinforced concrete bridge decks”. Structural Safety, 1998, 20, 91-109.

Suzuki M, Tsutsumi T, Irie M, “Reliability analysis of durability/deterioration indices of reinforced concrete in a marine environment”. Corrosion of reinforcement in concrete. Barking U.K.: Elsevier Sciencep, 1990, 268-277.

Val DV, Melchers RE, “Reliability of deteriorating RC slab bridges”. Journal of Structural Engineering, ASCE, 1997, 123(12), 1638–1644.

Vidal T, Castel A, Francois R, “Analyzing crack width to predict corrosion in reinforced concrete". Cement and Concrete Research, 2004, 34, 165–174).

Vu K, Stewart MG, “Structural reliability of concrete bridges including improved chloride-induced corrosion models”. Structural Safety, 2000, 22 (4), 313-333.

Vu K, Stewart MG, Mullard J, “Corrosion-Induced Cracking: Experimental Data and Predictive Models”. ACI, Structural Journal, 2005, 102(5), 719-726.