طراحی پلاستیک براساس عملکرد در قاب‌های مهاربندی شده واگرا مجهزبه میراگر جرمی و دارای تیر پیوند افقی

Ahmadi A, Alirezaei M, Sharifi M, “Experimental study of improved seismic behaviour of eccentrically braced frames by zipper elements”, Proceedings of the Institution of Civil Engineers-Structures and Buildings, 2025. https://doi.org/10.1680/jstbu.24.00076

AISC 341-05, “Seismic provisions for structural steel buildings”, American Institute of Steel Construction, Chicago, Illinois, 2005.

Cai Y, Gu H, Shi J, Wang S, Sun C, Tong L, Xu W, “Seismic performance of a self-centering concrete frame with tuned viscous mass dampers based on mode tuning design”, Structures, 2025, 76, 108991. https://doi.org/10.1016/j.istruc.2025.108991

Chao SH, Goel SC, “Performance-based seismic design of ebf using target drift and yield mechanism as performance criteria, report No. UMCEE 05-05”, Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, MI, 2005.

Chao SH, Goel SC, “A seismic design method for steel concentric braced frames for enhanced performance”, 4^th International Conference on Earthquake Engineering, Taipei, Taiwan, 2006a, 10-11.

Chao SH, Goel SC, “Performance-based design of eccentrically braced frames using target drift and yield mechanism”, AISC Engineering Journal, Third Quarter, 2006b, 173-200. https://doi.org/10.62913/engj.v43i3.1294

Chao SH, Goel SC, Lee SS, “A seismic design lateral force distribution based on inelastic state of structures”, Earthquake Spectra, 2007, 23 (3), 547-569. https://doi.org/10.1193/1.2753549

Chao SH, Goel SC, “Performance-based plastic design of seismic resistant special truss moment frames”, AISC Engineering Journal, Second Quarter, 2008, 127-150. https://doi.org/10.62913/engj.v45i2.933

Chen W, Xu J, Yu K, Yu J, Ma M, Ma Z, “Performance-based design of FRP-confined recycled aggregate concrete powered by machine learning techniques”, Engineering Structures, 2025, 336, 120478. https://doi.org/10.1016/j.engstruct.2025.120478

Chopra AK, “Estimating seismic demands for performance-based engineering of buildings”, Proceedings of the 13^th World Conference on Earthquake Engineering, Mira Digital Publishing, Canada, 2004.

Clough RW, Penzien J, “Of structures”, McGraw-Hill, NY, USA, 1975.

CSI, “PERFORM-3D v.4.0 User Manual”, Computers and Structures Inc., Berkeley, CA, 2007.

Dasgupta P, Goel SC, Parra-Montesinos G, “Performance-based seismic design and behavior of a composite buckling restrained braced frame (BRBF)”, Proceedings of the Thirteenth World Conference on Earthquake Engineering, 2004.

Furukawa S, Goel SC, Chao SH, “Seismic evaluation of eccentrically braced steel frames designed by performance-based plastic design method”, The 14^th World Conference on Earthquake Engineering, October 12-17, Beijing, China, 2008.

Goel SC, Chao SH, “Performance-Based Plastic Design: Earthquake Resistant Steel Structures”, International Code Council, Washington, DC, 2008.

Housner GW, “Limit design of structures to resist earthquakes”, Proceedings of First World Conference on Earthquake Engineering, Earthquake Engineering Research Institute, Berkeley, CA, June 1956, Part 5, 1-11.

International Building Code (IBC), International Code Council, 2009.

Jiang S, Ma R, Bi K, Du X, Song J, “Negative stiffness enhanced tuned mass damper (NS-TMD) for seismic induced response mitigation of isolated bridges”, Engineering Structures, 2025, 325, 119416. https://doi.org/10.1016/j.engstruct.2024.119416

Lee SS, Goel SC, “Performance-based design of steel moment frames using target drift and yield mechanism, Report No. UMCEE 01-17”, Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, MI, 2001.

Leelataviwat S, Goel SC, Stojadinović B, “Drift and yield mechanism based seismic design and upgrading of steel moment frames, Report No. UMCEE 98-29”, Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, 1998.

Leelataviwat S, Goel SC, Stojadinović B, “Toward performance-based seismic design of structures”, Earthquake Spectra, 1999, 15 (3). https://doi.org/10.1193/1.1586052

Leelataviwat S, Saewon W, Goel SC, “An energy-based method for seismic evaluation of structures”, Proceedings of Structural Engineers Association of California Convention, SEAOC 2007, Lake Tahoe, CA, September, 2007, 26 (29), 21-31. https://doi.org/10.1061/41084(364)70

Li T, Su M, Shi G, Guo J, Zhao H, “Damage and collapse assessment of high-strength steel-composite K-shaped eccentrically-braced frame based on deformation and energy dissipation”, Journal of Building Engineering, 2025, 114, 114298. https://doi.org/10.1016/j.jobe.2025.114298

Li Y, Xue J, Yuan H, Huang H, Zhang Y, Wang Q, “Seismic performance of special-shaped column prefabricated eccentrically braced frame with low-yield-point links”, Journal of Constructional Steel Research, 2026, 236, 110019. https://doi.org/10.1016/j.jcsr.2025.110019

Ma C, Gernay T, “Economic impact of performance-based fire design of composite steel frame structures”, Engineering Structures, 2025, 338, 120542. https://doi.org/10.1016/j.engstruct.2025.120542

NEHRP, “Commentary on recommended provisions for the development of seismic regulations for new buildings (FEMA 369)”, Federal Emergency Management Agency, Washington, D.C, 2001a.

NEHRP, “Recommended provisions for the development of seismic regulations for new buildings (FEMA 368)”, Federal Emergency Management Agency, Washington, D.C, 2001b.

Nuñez E, Mata R, Melo D, “Seismic performance of eccentrically braced frames with intermediate- and long-links: An IDA-based study using Chilean earthquakes”, Structures, 2025, 82, 110452. https://doi.org/10.1016/j.istruc.2025.110452

Rakhsha F, Hatami S, Gorji Azandariani M, Alipour Mansourkhani A, Davani M, “Resistance of eccentric braced steel frames against progressive collapse and overload factor”, Structures, 2024, 70, 107933. https://doi.org/10.1016/j.istruc.2024.107933

Standard No. 2800, “Iranian code of practice for seismic resistant design of buildings”, Edition 4, 2016.

Tai Y, Cheng L, Liu L, Bao H, Wang S, “Optimal design and performance analysis of a tuned negative-stiffness inerter mass damper for vibration control systems”, Structures, 2025, 73, 108163. https://doi.org/10.1016/j.istruc.2024.108163

Tran NA, Anh ND, Nguyen NL, Bui HL, Cao HQ, “Passive or active control of an actual building under earthquakes using rolling rim-type TMD: A comparative study”, Soil Dynamics and Earthquake Engineering, 2026, 200, 109828. https://doi.org/10.1016/j.soildyn.2025.109828

Tran NA, Bui HL, “Rolling tuned mass damper for vibration control of building structures subjected to earthquakes: A comparative study”, Soil Dynamics and Earthquake Engineering, 2025, 194, 109376. https://doi.org/10.1016/j.soildyn.2025.109376

Uniform Building Code (UBC), “International conference of building officials”, Whittier, Calif, 1994.

Uniform Building Code (UBC), “International conference of building officials”, Whittier, Calif, 1997.