
تعداد نشریات | 45 |
تعداد شمارهها | 1,385 |
تعداد مقالات | 16,967 |
تعداد مشاهده مقاله | 54,601,201 |
تعداد دریافت فایل اصل مقاله | 17,211,728 |
تحلیل عددی و تجربی افت فشار روغن و نیروی لازم برای تغییر وضعیت سوپاپ دو راههی هیدرولیکی | ||
مهندسی مکانیک دانشگاه تبریز | ||
دوره 55، شماره 2 - شماره پیاپی 111، مرداد 1404، صفحه 25-32 اصل مقاله (494.08 K) | ||
نوع مقاله: مقاله پژوهشی | ||
شناسه دیجیتال (DOI): 10.22034/jmeut.2025.64003.3476 | ||
نویسندگان | ||
منصور صادقی سلیمی1؛ پژمان نیک اندیش* 2 | ||
1کارشناسی ارشد، گروه مهندسی مکانیک، دانشگاه صنعتی جندیشاپور دزفول، دزفول، ایران | ||
2استادیار، گروه مهندسی مکانیک، دانشگاه صنعتی جندیشاپور دزفول، دزفول، ایران | ||
چکیده | ||
در این مقاله، تأثیر شیب محور و نسبت قطر سطوح مؤثر اسپول، بر افت فشار روغن و نیروی لازم برای تغییر وضعیت سوپاپهای دوراههی هیدرولیکی به روشهای عددی و تجربی، مطالعه گردید. بررسیها نشان داد که متوسط اختلاف میان نتایج حاصل از اندازهگیریهای تجربی کمیتهای وابسته، با نتایج عددی، کمتر از 6 درصد است. در ضمن، ایجاد شیبهای 15، 20 و 25 درجه بر روی محور اسپول، کاهش 5/31، 3/29 و 6/25 درصدی افت فشار روغن و همچنین، کاهش، 1/26، 2/23 و 7/20 درصدی نیروی وارد بر اسپول را به همراه دارند. این در حالی است که با افزایش نسبت قطر برآمدگی اسپول به قطر محور آن از 6/0 به 8/0، افت فشار و نیروی لازم برای تغییر وضعیت سوپاپ، به ترتیب، 14 و 8/10 درصد افزایش مییابند. با کاهش نسبت قطر برآمدگی اسپول به قطر محور آن از 6/0 به 4/0، تغییر قابلتوجهی در روند تغییرات افت فشار روغن و نیروی محوری وارد بر اسپول ایجاد نمیگردد. | ||
کلیدواژهها | ||
سوپاپ هیدرولیکی؛ افت فشار؛ تحلیل عددی؛ سامانههای هیدرولیکی؛ نسبت قطر؛ دو راهه | ||
مراجع | ||
[1] Li Y, Li R, Yang J, Yu X, Xu J. Review of Recent Advances in Hydraulic Control Valve Drive Method. Processes. 2023;11(9):2537. [2] نیکاندیش پ، میرزاوند م، تحلیل تجربی و عددی عملکرد سوپاپ هیدرولیکی شامل پاپت مخروطی با نشیمنگاه لبه تیز. مجلۀ مهندسی مکانیک دانشگاه تبریز. 1400، د. 51، ش. 2، ص 249-258.
[3] نیکاندیش پ، مینایی س، قبادیان ب، شیخ داوودی ج، تعیین کمیتهای موثر در رابطهی خطیسازیشده جریان برای سوپاپهای کنترل جهت هیدرولیکی. مجلۀ مهندسی مکانیک دانشگاه تبریز. 1393، د. 44، ش. 1، ص 39-49. [4] Zhang H, Liao Y, Tao Z, Lian Z, Zhao R. Dynamic Characteristics of a Novel High-Pressure and Large-Flow Water Hydraulic Proportional Valve. Machines. 2022;10(1):37. [5] Domagala M, Fabis-Domagala J. A Review of the CFD Method in the Modeling of Flow Forces. Energies. 2023;16(16):6059. [6] Zhang J, Lu Z, Xu B, Su Q. Investigation on the dynamic characteristics and control accuracy of a novel proportional directional valve with independently controlled pilot stage. ISA Trans. 2019;93:218-30. [7] Gomez I, Gonzalez-Mancera A, Newell B, Garcia-Bravo J. Analysis of the Design of a Poppet Valve by Transitory Simulation. Energies. 2019;12(5):889. [8] Zhang J-h, Wang D, Xu B, Su Q, Lu Z, Wang W. Flow control of a proportional directional valve without the flow meter. Flow Measurement and Instrumentation. 2019. [9] Zhu Y, Jin B. Analysis and modeling of a proportional directional valve with nonlinear solenoid. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2015;38. [10] Liu J, Li R, Ding X, Liu Q. Flow force research and structure improvement of cartridge valve core based on CFD method. Heliyon. 2022; 8(11): 11700. [11] Lisowski E, Filo G, Rajda J. Analysis of Flow forces in the initial phase of a throttle gap opening in a proportional control valve. Flow Measurement and Instrumentation. 2018;59:157-67. [12] Li R, Sun Y, Wu X, Zhang P, Li D, Lin J, et al. Review of the Research on and Optimization of the Flow Force of Hydraulic Spool Valves. Processes. 2023;11(7):2183. [13] Borghi M, Milani M, Paoluzzi R. Influence of Notch Shape and Number of Notches on the Metering Characteristics of Hydraulic Spool Valves. International Journal of Fluid Power. 2005;6:5-18. [14] Lisowski E, Rajda J. CFD analysis of pressure loss during flow by hydraulic directional control valve constructed from logic valves. Energy Conversion and Management. 2013;65:285-91. [15] Ye Y, Yin C-B, Li X-D, Zhou W-j, Yuan F-f. Effects of groove shape of the notch on the flow characteristics of the spool valve. Energy Conversion and Management. 2014;86:1091-101. [16] Aung NZ, Jinghui P, Songjing L. Reducing the steady flow force acting on the spool by using a simple jet-guiding groove. 2015 International Conference on Fluid Power and Mechatronics (FPM). 2015:289-94. [17] Rituraj R, Scheidl R. Stability analysis of spools with imperfect sealing gap geometries. International Journal of Fluid Power. 2020; 21(3): 383-404. [18] Tang W, Xu G, Zhang S, Jin S, Wang R. Digital twin-driven mating performance analysis for precision spool valve. Machines. 2021; 9(8): 157. [19] Fei S, Jia C, Likun P, Jie L. Experimental research on the internal leakage of hydraulic slide valve. Fluid Machinery. 2021; 49(7): 1-6. [20] Li S, Du J, Shi Z, Xu K, Shi W. Characteristics Analysis of the Pilot-Operated Proportional Directional Valve by Experimental and Numerical Investigation. Energies. 2022;15(24):9418. [21] Chen J, Li F, Yang Y. An accurate mathematical model and experimental research of pressure distribution in the spool valve clearance film. Mathematical Problems in Engineering. 2022; 11: 1-18. [22] Ledvoň M, Hružík L, Bureček A, Polášek T, Dýrr F, Kolář D. Experimental and Numerical Analysis of Flow Force Acting on the Spool of Proportional Directional Valve. Processes. 2023;11(12):3415. [23] Ledvoň M, Hružík L, Bureček A, Dýrr F, Polášek T. Leakage Characteristics of Proportional Directional Valve. Processes. 2023;11(2):512. | ||
آمار تعداد مشاهده مقاله: 29 تعداد دریافت فایل اصل مقاله: 13 |