| تعداد نشریات | 45 |
| تعداد شمارهها | 1,416 |
| تعداد مقالات | 17,490 |
| تعداد مشاهده مقاله | 56,483,988 |
| تعداد دریافت فایل اصل مقاله | 18,742,300 |
تأثیر رکوردهای پالسدار بر ظرفیت فروریزش لرزهای قابهای خمشی ویژه بتنآرمه بهینهسازی شده براساس عملکرد در ساختمانهای بلندمرتبه | ||
| نشریه مهندسی عمران و محیط زیست | ||
| مقاله 9، دوره 55، شماره 119، شهریور 1404، صفحه 109-124 اصل مقاله (973.52 K) | ||
| نوع مقاله: مقاله کامل پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22034/ceej.2025.64694.2400 | ||
| نویسندگان | ||
| مهرناز کوه کمری؛ اشکان خدابنده لو* | ||
| گروه مهندسی عمران، دانشگاه آزاد اسلامی، واحد ارومیه | ||
| چکیده | ||
| اثر تخریبی زلزله به عواملی چون مکانیزم شکست گسل، فاصله گسل تا ساختگاه، نوع خاک، مشخصات حرکت زمین و همچنین به خصوصیات دینامیکی سازه وابسته است. هدف از این مطالعه، بررسی تأثیر رکوردهای پالسدار بر ایمنی لرزهای قابهای خمشی ویژه بتنآرمه بهینهسازی شده براساس عملکرد در ساختمانهای بلندمرتبه میباشد. در این تحقیق بهمنظور مدلسازی و انجام تحلیل ها از نرمافزار اپنسیس (Open-Sees) و جهت پیاده سازی چهارچوب بهینهسازی مبتنی بر عملکرد از نرمافزار متلب (Matlab) استفاده شده است. در گام اول قابهای بلند خمشی با استفاده از تحلیل مودال پوشاور (Push Over) و لینک نرمافزار متلب با نرمافزار اپنسیس بر اساس ضوابط آییننامه ASCE41-17 و FEMA356، براساس عملکرد بهینهسازی شدند. در گام دوم، ارزیابی لرزهای قابهای بهینهسازی شده، با استفاده از تحلیل دینامیکی افزایشی IDA، نمودارهای شکنندگی و مقدار نسبت حاشیه فروریزش به دست آمده مورد بحث و بررسی قرار گرفته است. 3 قاب خمشی بلند بتنی 20، 25 و 30 طبقه با ارتفاع طبقات 2/3 متر و عرض دهانه 6 متر، مثال های مورد بررسی در این تحقیق میباشند. با توجه به نتایج به دست آمده از دینامیکی افزاینده بر روی سازههای مذکور، ظرفیت فروریزش قاب 20، 25 و 30 طبقه تحت زلزلههای پالسدار، بهترتیب 13%، 36% و 59% کمتر از ظرفیت فروریزش قابهای مذکور تحت زلزلههای بدون پالس میباشد. ازطرفی هر سه قاب طراحی شده از لحاظ ایمنی لرزهای در محدوده قابل قبول با توجه به ACMR، مجاز میباشند. | ||
| کلیدواژهها | ||
| قاب خمشی بلند بتنی؛ بهینهسازی؛ طراحی براساس عملکرد؛ تحلیل دینامیکی افزایشی؛ نسبت ظرفیت فروریزش | ||
| مراجع | ||
|
ACI, 2019, “Building Code Requirements for Structural Concrete and Commentary”, Farmington Hills: M.A.C.I. Asgarian B, Sadrinezhad A, Alanjari P, “Seismic performance evaluation of steel moment resisting frame through incremental dynamic analysis”, Journal of Constructional Steel Research, 2010, 66, 178-190. Bayati Z, Masoud S, “Ground motion selection and scaling approach for evaluation of reinforced concrete frames against sidesway collapse”, 2012. Cha YJ, Bai JW, “Seismic fragility estimates of a moment-resisting frame building controlled by MR dampers using performance-based design”, Engineering Structures, 2016, 116, 192-202. Deierlein G, Liel A, “Assessing building system collapse performance and associated requirements for seismic design”, SEAOC Convention Proceedings, 2007. Ebrahimi, 2013. Assessment of Collapse Capacity of RC Buildings Based on Fiber-element Modelling. Department of Civil and Natural Resources Engineering, University of Canterbury, Christchurch, New Zealand. Elnashai MR, Sigbjörnsson R, Salama A, “Significance of sever distance and moderate close earthquake on design and behavior of tall building”, The Structural Design of Tall and Special Building, 2006, 15, 391-416. Fattahi F, Gholizadeh S, “Seismic fragility assessment of optimally designed steel moment frames”, Engineering Structures, 2019, 179, 37-51. Fragiadakis M, Lagaros N, Papadrakakis M, “Performance based earthquake engineering using structural optimization tools”, International Journal of Reliability and Safety, 2006, 1 (1/2), 59-76. Gholizadeh S, Ebadijalal M, “Performance based discrete topology optimization of steel braced frames by a new metaheuristic”, Advances in Engineering Software, 2018, 123, 77-92. https://doi.org/10.1016/J.ADVENGSOFT.2018.06.002 Gholizadeh S, Aligholizadeh V, “Reliability-based optimum seismic design of RC frames by a metamodel and metaheuristics”, Structural Design of Tall and Special Buildings, 2019, 28, e1552. https://doi.org/10.1002/tal.1552 Hajirasouliha I, Asadi P, Pilakoutas K, “An efficient performance-based seismic design method for reinforced concrete frames”, Earthquake Engineering & Structural Dynamics, 2012, 41 (4), 663-679. Hardyniec A, Charney F, “A new efficient method for determining the collapse margin ratio using parallel computing”, Computers and Structures, 2015, 148, 15-25. Hwang SH, Lignos DG, “Earthquake-induced loss assessment of steel frame buildings with special moment frames designed in highly seismic regions”, Earthquake Engineering and Structural Dynamics, 2017, 46, 2141-2162. Kaveh A, Sabzi O, “Optimal design of reinforced concrete frames Using big bang-big crunch algorithm”, IJCE, 2012, 10 (3), 189-200. Mander JB, Priestley MJN, Park R, “Theoretical stress-strain model for confined concrete”, Journal of Structural Engineering, 1988, 114, 1804-1826. Rahgozar N, Moghadam AS, “Probabilistic safety assessment of self-centering steel braced frame”, Frontiers of Structural and Civil Engineering, 2017. Razmara Shooli A, Vosoughi AR, Banan MR, “A mixed GA-PSO-based approach for performance-based design optimization of 2D reinforced concrete special moment-resisting frames”, Applied Soft Computing, 2019, 85, 105843. https://doi.org/10.1016/j.asoc.2019.105843 Rojas HA, Pezeshk S, Foley CM, “Performance-based optimization considering both structural and nonstructural components”, Earthquake Spectra, 2007, 23 (3), 685-709. Saboonchi S, Khodabandehlou A, “The Effect of far- and near-field earthquakes on the collapse capacity of performance-based optimization of rc moment frames”, Journal of Analysis of Structure and Earthquake, 2023, 20 (1), Spring. https://doi.org/10.30495/CIVIL.2023.701926 Shafei B, Zareian F, Lignos DJ, “A simplified method for collapse capacity assessment of moment-resisting frame and shear wall structural systems”, Engineering Structures, 2011, 1107-1116. Stewart JP, Chiou S, Bray JD, Somerville PG, Abrahamson N, “Ground Motion Evaluation procedure for performance-based design”, Report 2001/09, PEER Berkeley, 2001. Xu J, Spencer BF, Lu X, “Performance-based optimization of nonlinear structures subject to stochastic dynamic loading”, Engineering Structures, 2017, 134, 334-345. Yazdani H, Khatibinia M, Gharehbaghi S, Hatami K, “Probabilistic performance-based optimum seismic design of RC structures considering soil-structure interaction effects”, ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 3, G4016004, 2017. https://doi.org/10.1061/AJRUA6.0000880A
| ||
|
آمار تعداد مشاهده مقاله: 180 تعداد دریافت فایل اصل مقاله: 99 |
||