بررسی و ارزیابی آزمایشگاهی کمانش اعوجاجی در تیرهای فولادی با ارتفاع جان متغیر تحت بار متمرکز

Andrade A, Camotim D, “Lateral-torsional buckling of prismatic and tapered thin-walled open beams: assessing the influence of pre-buckling deflections”, Steel and Composite Structures, An International Journal, 2004, 4 (4), 281-301.

Attard MM, “Extrapolation techniques for buckling loads”, Journal of Structural Engineering, 1983, 109 (4), 926-935.

Attard MM, Bradford MA, “Bifurcation experiments on monosymmetric cantilevers. In 12th Aust”, Conf. On Mechanics of Structures and Material, 1990, December, 207-213.

Bradford MA, “Buckling of elastically restrained beams with web distortions”, Thin-Walled Structures, 1988, 6, 287-304. https://doi.org/10.1016/0263-8231(88)90005-5

Bradford MA, “Buckling strength of deformable monosymmetric I-beams”, Engineering Structures, 1988, 10, 167-173. https://doi.org/10.1016/0141-0296(88)90003-X

Bradford MA, “Distortional buckling of monosymmetric I-beams”, Journal of Constructional Steel Research, 1985, 5, 123-136. https://doi.org/10.1016/0143-974X(85)90010-0

Bradford MA, “Distortional buckling of monosymmetric I-beams”, Journal of Constructional Steel Research, 1985, 5 (2), 123-136.

Bradford MA, “Inelastic distortional buckling of I beams”, Computers & Structures, 1986, 24, 923–933. https://doi.org/10.12989/scs.2003.3.1.001

Bradford MA, “Lateral-Distortional buckling of steel I Section members”, Journal of Constructional Steel Research, 1992, 23 (1-3), 97-116.

Bradford MA, Wee A, “Analysis of buckling tests on beams on seat supports”, Journal of Constructional Steel Research, 1994, 28 (3), 227-242.

Hughes O, Ma M, “Lateral–distortional buckling of monosymmetric beams under point load”, Journal of Structural Mechanics, 1996, 122 (10), 1022-1029.

Lei JS, Li LY, “Combined web distortional and lateral-torsional buckling of partially restrained I-section beams”, International Journal of Mechanical Sciences, 2017, 131, 107-112.

Mandal P, Calladine CR, “Lateral-torsional buckling of beams and the Southwell plot”, International Journal of Mechanical Sciences, 2002, 44 (12), 2557-2571.

Naderian HR, Ronagh HR, Azhari M, “Elastic distortional buckling of doubly symmetric steel I-section beams with slender webs”, Thin-Walled Structures, 2014, 84, 289-301.

Pi Y-L, Trahair NS, “Lateral-distortional buckling of hollow flange beams”, Journal of Structural Engineering, 1997, 123, 695-702. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:6(695)

Roberts TM, Jhita PS, “Lateral, local and distortional buckling of I-beams. Thin-Walled Structures, 1983, 1, 289-308. https://doi.org/10.1016/0263-8231(83)90011-3

Rossi A, Ferreira FPV, Martins CH, Júnior ECM, “Assessment of lateral distortional buckling resistance in welded I-beams”, Journal of Constructional Steel Research, 2020, 166, 105924.

Rossi A, Nicoletti RS, de Souza ASC, Martins CH, “Lateral distortional buckling in steel-concrete composite beams: A review”, Structures, 2020, 27, 1299-1312.

Samanta A, Kumar A, “Distortional buckling in monosymmetric I-beams”, Thin-Walled Structures, 2006, 44 (1), 51-56.

Schafer BW, Peköz T, “Computational modeling of cold-formed steel: characterizing geometric imperfections and residual stresses”, Journal of Constructional Steel Research, 1998, 47 (3), 193-210.

Trahair NS, “Deformations of geometrically imperfect beams”, Journal of the Structural Division, 1969, 95 (7), 1475-1496.

Trahair NS, “Lateral–distortional buckling of monorails”, Engineering Structures, 2009, 31 (12), 2873-2879.

Wang CM, Chin CK, Kitipornchai S, “Parametric study on distortional buckling of monosymmetric beam-columns”, Journal of Constructional Steel Research, 1991, 18, 89-110. https://doi.org/10.1016/0143-974X(91)90067-B

Ye ZM, Kettle R, Li LY, “Buckling behaviour of cold-formed zed-purlins partially restrained by steel sheeting”, Thin-walled structures, 2002, 40 (10), 853-864.

Young B, Rasmussen KJ, “Design of lipped channel columns”, Journal of Structural Engineering, 1998, 124 (2), 140-148.

Zirakian T, “Elastic distortional buckling of doubly symmetric I-shaped flexural members with slender webs”, Thin-Walled Structures, 2008, 46 (5), 466-475.

Zirakian T, “Lateral–distortional buckling of I-beams and the extrapolation techniques”, Journal of Constructional Steel Research, 2008, 64 (1), 1-11.

Zirakian T, Showkati H, “Distortional buckling of castellated beams”, Journal of Constructional Steel Research, 2006, 62 (9), 863-871.

Zirakian T, Showkati H, “Experiments on distortional buckling of I-beams”, Journal of Structural Engineering, 2007, 133 (7), 1009-1017.