مدلسازی تحلیلی اتصالات تیر به ستون با جزئیات غیرلرزه‌ای بهسازی شده با استفاده از بزرگ‌کردن اتصال و پیش‌تنیدگی

Akbar J, Ahmad N, Alam B, “Seismic strengthening of deficient reinforced concrete frames using reinforced concrete haunch”, Aci Structural Journal, 2019, 116, 225-235. https://doi.org/10.14359/51710875

Akguzel U, “Seismic performance of FRP retrofitted exterior RC beam-column joints under varying axial and bidirectional loading”,  2011.

Alcocer SM, Jirsa JO, “Strength of reinforced concrete frame connections rehabilitated by jacketing”, ACI structural journal, 1993, 90.

Behnam H, Kuang J, Huang RY, “Exterior RC wide beam-column connections: Effect of beam width ratio on seismic behaviour”, Engineering Structures, 2017, 147, 27-44. https://doi.org/10.1016/j.engstruct.2017.05.044

Cosgun C, Comert M, Demir C, Ilki A, “Seismic retrofit of joints of a full-scale 3D reinforced concrete frame with FRP composites”, Journal of Composites for Construction, 2019, 23, 21. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000923

Dang CT, Dinh NH, “Experimental study on structural performance of RC exterior beam-column joints retrofitted by steel jacketing and haunch element under cyclic loading simulating earthquake excitation”, Advances in Civil Engineering, 2017, 1-11. https://doi.org/10.1155/2017/9263460

Del Vecchio C, Di Ludovico M, Prota A, Manfredi G, “Analytical model and design approach for FRP strengthening of non-conforming RC corner beam-column joints”, Engineering Structures, 2015, 87, 8-20. https://doi.org/10.1016/j.engstruct.2015.01.013

Deng BY, Liu X, Yu KQ, Li LZ, Chen Y, “Seismic retrofitting of RC joints using steel cage and haunch with bolted steel plate”, Structures, 2022, Elsevier, 285-298. https://doi.org/10.1016/j.istruc.2022.06.056

Doǧangun A, “Performance of reinforced concrete buildings during the May 1, 2003 Bingöl Earthquake in Turkey”, Engineering Structures, 2004, 26, 841-856. https://doi.org/10.1016/j.engstruct.2004.02.005

Du X, Wei D, Huang L, Zhu M, Zhang Y, Zhu Y, “3D printing of mesoporous bioactive glass/silk fibroin composite scaffolds for bone tissue engineering”, Materials Science and Engineering: C, 2019, 103, 109731. https://doi.org/10.1016/j.msec.2019.05.016

Engindeniz M, Kahn LF, Abdul-Hamid Z, “Repair and strengthening of reinforced concrete beam-column joints: State of the art”, ACI Structural Journal, 2005, 102.

Feng DC, Xu J, “An efficient fiber beam-column element considering flexure-shear interaction and anchorage bond-slip effect for cyclic analysis of RC structures”, Bulletin of Earthquake Engineering, 2018, 16, 5425-5452. https://doi.org/10.1007/s10518-018-0392-y

Genikomsou AS, Polak MA, “Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS”, Engineering Structures, 2015, 98, 38-48. https://doi.org/10.1016/j.engstruct.2015.04.016

Ghobarah A, Aziz TS, Biddah A, “Rehabilitation of reinforced concrete frame connections using corrugated steel jacketing”, Structural Journal, 1997, 94, 282-294.

Ghobarah A, Saatcioglu M, Nistor I, “The impact of the 26 December 2004 earthquake and tsunami on structures and infrastructure”, Engineering Structures, 2006, 28, 312-326. https://doi.org/10.1016/j.engstruct.2005.09.028

Gur T, Pay A, Ramirez JA, Sozen MA, Johnson AM, Irfanoglu A, Bobet A, “Performance of school buildings in Turkey during the 1999 Düzce and the 2003 Bingöl Earthquakes”, Earthquake Spectra, 2009, 25, 239-256. https://doi.org/10.1193/1.3089367

Hajrasouliha M, Mostofinejad D, “Effect of lateral beam on the seismic behavior of corner RC beam-column joints under cyclic reversal loading”, European Journal of Environmental and Civil Engineering, 2019. https://doi.org/10.1080/19648189.2019.1618738

Karayannis CG, Chalioris CE, Sirkelis GM, “Local retrofit of exterior RC beam-column joints using thin RC jackets An experimental study”, Earthquake Engineering & Structural Dynamics, 2008, 37, 727-746. https://doi.org/10.1002/eqe.783

Kaya O, Yalcın C, Parvin A, Altay S, “Retrofitting of reinforced concrete beam-column joints by composites-Part I: experimental study”, ACI Structural Journal, 2019, 116, 17. https://doi.org/10.14359/51706922

Kmiecik P, Kamiński M, “Modelling of reinforced concrete structures and composite structures with concrete strength degradation taken into consideration”, Archives of Civil Mechanical Engineering, 2011, 11, 623-636. https://doi.org/10.1016/S1644-9665(12)60105-8

Ma Cl, Wang ZY, Smith ST, “Seismic Performance of Large-Scale RC Eccentric Corner Beam-Column-Slab Joints Strengthened with CFRP Systems”, Journal of Composites for Construction, 2020, 24. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000995

Mander JB, Priestley MJ, Park R, “Theoretical stress-strain model for confined concrete”, Structural Engineering, 1988, 114, 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)

Marchisella A, Muciaccia G, “Haunch retrofit of RC beam-column joints: Linear stress field analysis and Strut‐and‐Tie method application”, Earthquake Engineering & Structural Dynamics, 2023. https://doi.org/10.1002/eqe.3921

Miller DK, “Lessons learned from the Northridge earthquake”, Engineering Structures, 1998, 20, 249-260. https://doi.org/10.1016/S0141-0296(97)00031-X

Moehle JP, Mahin SA, “Observations on the behavior of reinforced concrete buildings during earthquakes”, Special Publication, 1991, 127, 67-90.

Murad Y, “Joint shear strength models for exterior RC beam-column connections exposed to biaxial and uniaxial cyclic loading”, Journal of Building Engineering, 2020, 30, 11. https://doi.org/10.1016/j.jobe.2020.101225

Nezami SA, Shafaei J, “Parametric Finite Element Evaluation of RC Beam-Column Joints”, Advance Researches in Civil Engineering, 2021, 3, 16-26. https://doi.org/10.30469/arce.2021.135123

Nzabonimpa J, Hong WK, Kim J, “Nonlinear finite element model for the novel mechanical beam-column joints of precast concrete-based frames”, Computers & Structures, 2017, 189, 31-48. https://doi.org/10.1016/j.compstruc.2017.04.016

Pampanin S, “Controversial aspects in seismic assessment and retrofit of structures in modern times: Understanding and implementing lessons from ancient heritage”, Bulletin of the New Zealand Society for Earthquake Engineering, 2006, 39, 120-133.

Pampanin S, Akguzel U, “Performance-based seismic retrofit of existing reinforced concrete frame buildings using fibre-reinforced polymers: challenges and solutions”, Structural Engineering International, 2011, 21, 260-270. https://doi.org/10.2749/101686611X13049248220041

Pampanin S, Amaris A, Akguzel U, Palermo A, “Experimental investigations on high-performance jointed ductile connections for precast frame systems”, 2006.

Park R, “Evaluation of ductility of structures and structural assemblages from laboratory testing”, Bulletin of the New Zealand National Society for Earthquake Engineering, 1989, 22, 155-166.

Paulay T, Priestley MN, “Seismic design of reinforced concrete and masonry buildings”, 1992a.

Paulay T, Priestley MN, “Seismic design of reinforced concrete and masonry buildings”, Seismic Design Book, 1992b.

Pimanmas A, Chaimahawan P, “Shear strength of beam-column joint with enlarged joint area”, Engineering Structures, 2010, 32, 2529-2545. https://doi.org/10.1016/j.engstruct.2010.04.021

Priestley M, “Report on the Third US PRESSS Coordinating Meeting”, Report No. PRESSS, 1992, 92, 12-16.

Purwanto P, Ekaputri JJ, Nuroji N, Indriyantho BR, Gan BS, Han AL, “Geopolymer haunch beam-column connection behavior”, Arabian Journal for Science and Engineering, 2023, 48, 13633-13648.

Said A, Nehdi M, “Rehabilitation of RC frame joints using local steel bracing”, Structures and Infrastructure Engineering, 2008, 4, 431-447. https://doi.org/10.1080/15732470600822033

Santarsiero G, Masi A, “Seismic performance of RC beam–column joints retrofitted with steel dissipation jackets”, Engineering Structures, 2015, 85,95-106. https://doi.org/10.1016/j.engstruct.2014.12.013

Sezen H, Whittaker AS, Elwood KJ, Mosalam KM, “Performance of reinforced concrete buildings during the August 17, 1999 Kocaeli, Turkey earthquake, and seismic design and construction practise in Turkey”, Engineering Structures, 2003, 25, 103-114. https://doi.org/10.1016/S0141-0296(02)00121-9

Shafaei J, Hosseini A, Marefat MS, “Seismic retrofit of external RC beam-column joints by joint enlargement using prestressed steel angles”, Engineering Structures, 2014, 81, 265-288. https://doi.org/10.1016/j.engstruct.2014.10.006

Shafaei J, Hosseini A, Marefat MS, Ingham JM, “Rehabilitation of earthquake damaged external RC beam‐column joints by joint enlargement using prestressed steel angles”, Earthquake Engineering & Structural Dynamics, 46, 291-316. https://doi.org/10.1002/eqe.2794

Shafaei J, Hosseini A, Marefat MS, Ingham JM, “Rehabilitation of earthquake damaged external RC beam‐column joints by joint enlargement using prestressed steel angles”, Earthquake Engineering Structural Dynamics, 2017b, 46, 291-316. https://doi.org/10.1002/eqe.2794

Shafaei J, Nezami SA, “Effect of different size of joint enlargement on seismic behavior of gravity load designed RC beam‐column connections”, The Structural Design of Tall and Special Buildings, 2019, 28, e1653. https://doi.org/10.1002/tal.1653

Tavasoli E, Rezaifar O, Kheyroddin A, “Seismic performance of RC joints retrofitted by external diagonal bolts”, Journal of Building Engineering, 2022, 46, 103691. https://doi.org/10.1016/j.jobe.2021.103691

Thorenfeldt E, “Mechanical properties of high-strength concrete and applications in design”, Symposium Proceedings, Utilization of High-Strength Concrete, Norway, 1987.

Tonidis M, Sharma A, “Detailed 3D FE modeling approach for 2D and 3D beam-column joints retrofitted with fully fastened haunch retrofit solution including anchor behavior”, Engineering Structures, 2023, 294, 116769. https://doi.org/10.1016/j.engstruct.2023.116769

Torabi A, Maheri MR, “Seismic repair and retrofit of RC beam-column joints using stiffened steel plates”, Iranian Journal of Science and Technology, Transactions of Civil Engineering, 2017, 41, 13-26.

Tsonos ADG, Performance enhancement of R/C building columns and beam-column joints through shotcrete jacketing”, Engineering Structures, 2010, 32, 726-740. https://doi.org/10.1016/j.engstruct.2009.12.001

Tsonos AG, “Lateral load response of strengthened reinforced concrete beam-to-column joints”, Seismic Design Practice into the Next Century, Routledge, 1998.

Tsonos AG, “Seismic repair of exterior R/C beam-to-column joints using two-sided and three-sided jackets”, Structural Engineering and Mechanics, 2002, 13, 17-34.

Yang Y, Chen Y, Chen Z, Wang N, Yu Y, “Experimental study on seismic behavior of RC beam-column joints retrofitted using prestressed steel strips”, Earthquakes and Structures, 2018, 15, 499. https://doi.org/10.12989/eas.2018.15.5.499

Yurdakul Ö, Tunaboyu O, Avşar Ö, “Retrofit of non-seismically designed beam-column joints by post-tensioned superelastic shape memory alloy bars”, Bulletin of Earthquake Engineering, 2018, 16, 5279-5307.

Zhao B, Taucer F, Rossetto T, “Field investigation on the performance of building structures during the 12 May 2008 Wenchuan earthquake in China”, Engineering Structures, 2009, 31, 1707-1723. https://doi.org/10.1016/j.engstruct.2009.02.039