| تعداد نشریات | 45 |
| تعداد شمارهها | 1,416 |
| تعداد مقالات | 17,490 |
| تعداد مشاهده مقاله | 56,485,105 |
| تعداد دریافت فایل اصل مقاله | 18,742,409 |
ارزیابی عددی رفتار دیوار میخکوبی شده | ||
| نشریه مهندسی عمران و محیط زیست | ||
| مقاله 1، دوره 55، شماره 119، شهریور 1404، صفحه 1-11 اصل مقاله (2.24 M) | ||
| نوع مقاله: مقاله کامل پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22034/ceej.2024.56139.2249 | ||
| نویسندگان | ||
| عبداله تبرئی* 1؛ سیده تکتم سیدی2 | ||
| 1گروه مهندسی عمران، مؤسسه آموزش عالی اشراق، بجنورد | ||
| 2گروه مهندسی عمران، مؤسسه آموزش عالی توس، مشهد | ||
| چکیده | ||
| امروزه، با توجه به رشد جمعیت در مناطق شهری، ساخت ساختمان های مرتفع گسترش یافته است. ایجاد ساختمان های مرتفع، نیازمند ایجاد طبقاتی در سطح زیرزمین و لزوم طراحی و اجرای گودبرداری زمین آن میباشد. در پژوهش حاضر، ابتدا دیواره میخکوبی شده منطقه سیاتل واشنگتن توسط نرم افزار PLAXIS 2D مدل سازی شده است. پس از صحت سنجی مدل عددی، اثر فاصله سربار مجاور از لبه گودبرداری بر عملکرد استاتیکی و لرزه ای دیوار میخکوبی شده مورد بررسی قرار گرفته است. نتایج تحلیل های عددی بیانگر این بودند که بیشترین مقدار نیروی برشی دیوار در محل میخ ها ایجاد میشود و با افزایش عمق، مقدار نیروی برشی افزایش پیدا کرده که این امر با توزیع فشار جانبی خاک نسبت به دیوار که به صورت مثلثی بوده متناسب میباشد. وجود میخ ها مانع حرکت دیوار به سمت گودبرداری شده و درنتیجه لنگر خمشی دیوار در اطراف هد میخ ها افزایش مییابد. نتایج تحلیل ها نشان دادند با تغییر فاصله سربار از لبه گودبرداری، مقادیر مؤلفه نیرو در میخ ها و درنتیجه پایداری دیواره تحت تأثیر قرار میگیرند. به علاوه، در فونداسیون های نزدیک به گودبرداری موضوع نشست اختلافی ناشی از محل گوه گسیختگی یک پارامتر بسیار مهم بوده و بایستی مورد توجه طراحان قرار بگیرد. | ||
| کلیدواژهها | ||
| دیوار میخکوبی شده؛ نرم افزار PLAXIS 2D؛ تغییر مکان افقی دیوار؛ نشست فونداسیون | ||
| مراجع | ||
|
Briaud JL, Lim Y, “Soil-nailed wall under piled bridge abutment: simulation and guidelines”, Journal of Geotechnical and Geoenvironmental Engineering, 1997, 123 (11), 1043-1050. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:11(1043) Brinkgreve RBJ, “PLAXIS 2D Version 8.6”, Manuals, 2002. Bryne R, “Manual for design & construction monitoring of soil nail walls”, US Department of Transportation, Federal Highway Administration, 1998. Ghareh S, “Parametric assessment of soil-nailing retaining structures in cohesive and cohesionless soils”, Measurement, 2015, 73, 341-351. https://doi.org/10.1016/j.measurement.2015.05.043 Haddad A, Karimi Farzaghi B, “Optimization of excavated walls using a combined nailing and anchoring system”, Fourth International Conference on Geotechnical and Soil Engineering, Iran, 2007. Hajian-niya A, Ebrahimian B, Hadizadeh Bazaz D, “Reducing the deformation of the pit walls using a combination of nailing and anchoring methods”, National Conference on Structures, Roads, Architecture, Chalus, 2011. Lin DG, Chung TC, Phien-Wej N, “Quantitative evaluation of corner effect on deformation behavior of multi-strutted deep excavation in Bangkok subsoil”, Geotechnical Engineering, 2003, 34 (1), 41-57. Mahdizadeh Shandiz M, “Numerical modeling of trench behavior stabilized by rod driving method-a case study”, Master's thesis, University of Science and Technology, Tehran 2012. Mittal S, “Soil nailing application in erosion control–an experimental study”, Geotechnical and Geological Engineering, 2006, 24 (3), 675-688. https://doi.org/10.1007/s10706-005-2577-9 Morse Cheriq B, Yousefi Rad M, “Stabilization of excavation by nailing method in granular soils with stable groundwater level”, Third National Conference of Iranian Geotechnical Engineering, 2018. National Building Regulations, Topic 6, “Loads on Buildings”, Ministry of Housing and Urban Development, Deputy of Housing and Building, National Building Regulations Office, 2019 edition. Ou CY, “Deep excavation theory and practice”, Taylor and Francis/Balkema, London, 2006. Rutherford CJ, “Design manual for excavation support using deep mixing technology”, Master’s Dissertation, College of Engineering, Texas A&M University, Texas, 2004. Sharma A, Ramkrishnan R, “Parametric optimization and multi-regression analysis for soil nailing using numerical approaches”, Geotechnical and Geological Engineering, 2020;38, 3505-3523. https://doi.org/10.1007/s10706-020-01230-8 Singh VP, Sivakumar Babu, GL, “2D Numerical Simulations of Soil Nail Walls”, Geotechnical and Geological Engineering, 2010, 28 (4), 299-309. https://doi.org/10.1007/s10706-009-9292-x Thompson SR, Miller IR, “Design, construction and performance of a soil nailed wall in Seattle, Washington”, In: Proceeding of a conference on design and performance of earth retaining structures, ASCE Special Publication, 1990, 25, 629-643. Wu D, Wang P, Liu GQ, “Influence of C and u values on slope supporting by soil nailing wall in thick miscellaneous fill site”, Advanced Materials Research, 2013, 504-507. Ye X, Wang S, Wang Q, Sloan SW, Sheng D, “Numerical and experimental studies of the mechanical behaviour for compaction grouted soil nails in sandy soil”, Computers and Geotechnics, 2017, 90, 202-214. https://doi.org/10.1016/j.compgeo.2017.06.011 Zamiran S, Ghojavand H, Saba H, “Numerical Analysis of Soil Nail Walls under Seismic Condition in 3D Form Excavations”, Applied Mechanics and Materials, 2012, 204-208, 2671-2676. 10.4028/www.scientific.net/AMM.204-208.2671 Zhang CC, Xu Q, Zhu HH, Shi B, Yin JH, “Evaluations of load-deformation behavior of soil nail using hyperbolic pullout model”, Geomechanics and Engineering, 2014, 277-292. https://doi.org/10.12989/gae.2014.6.3.277 Zolqadr E, Yasrobi SS, “Effect of wall batter angle on soil nail walls performance”, Geotechnical Aspects of Underground Construction in Soft Ground, 2014, 133-136. | ||
|
آمار تعداد مشاهده مقاله: 371 تعداد دریافت فایل اصل مقاله: 51 |
||