Numerical Analysis of Plastic Hinge Regions in RC Deep Beams under Concentrated and Distributed Loads

Abdel-Fattah B, Wight JK, "Study of moving beam plastic hinging zones for earthquake-resistant design of reinforced concrete buildings", Structural Journal, 1987, 84, 31-39.

Adinkrah-Appiah K, Adom-Asamoah M, "Characterization and Shear Strength Prediction of Reinforced Concrete Deep Beams-A Review, 2016.

Aguilar G, Matamoros AB, Parra-Montesinos G, Ramírez JA, Wight JK, "Experimental evaluation of design procedures for shear strength of deep reinfoced concrete beams", American Concrete Institute, 2002.

Abdel-Fattah B, Wight JK, "Study of moving beam plastic hinging zones for earthquake-resistant design of reinforced concrete buildings", Structural Journal, 1987, 84, 31-39. https://doi.org/10.14359/2767.

Adinkrah-Appiah K, Adom-Asamoah M, "Characterization and Shear Strength Prediction of Reinforced Concrete Deep Beams-A Review", International Journal of Science And Research, 2016, 5 (3), 1789-1798.

Aguilar G, Matamoros AB, Parra-Montesinos G, Ramírez JA, Wight JK, "Experimental evaluation of design procedures for shear strength of deep reinfoced concrete beams", American Concrete Institute, 2002.

Arabzadeh A, Aghayari R, Rahai A.R, "Investigation of experimental and analytical shear strength of reinforced concrete deep beams", International Journal of Civil Engineering, 2011, 207-214.

Baker AL, "The ultimate load theory applied to the design of reinforced & prestressed concrete frames", Concrete Publ. Lmd, 1956.

Chen H, Yi WJ, Hwang HJ, "Cracking strut-and-tie model for shear strength evaluation of reinforced concrete deep beams", Engineering Structures, 2018, 163, 396-408. https://doi.org/10.1016/j.engstruct.2018.02.077.

ACI committee 318, "Building code requirements for structural concrete", 2014.

Coleman J, Spacone E, "Localization issues in force-based frame elements", Journal of Structural Engineering, 2001, 127, 1257-1265. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:11(1257)

Corley WG, "Rotational capacity of reinforced concrete beams", Journal of the Structural Division, 1966, 92, 121-146. https://doi.org/10.1061/JSDEAG.0001504.

Demir A, Caglar N, Ozturk H, "Parameters affecting diagonal cracking behavior of reinforced concrete deep beams", Engineering Structures, 2019, 184, 217-231. https://doi.org/10.1016/j.engstruct.2019.01.090

Elmenshawi A, Brown T, El-Metwally S, "Plastic hinge length considering shear reversal in reinforced concrete elements", Journal of Earthquake Engineering, 2012. https://doi.org/10.1080/13632469.2011.597485

Ghazi-Nader D, Aghayari R, "Plastic hinge region in simply supported RC deep beams", Third International Conference and 7^th National Conference on Civil Engineering Materials and Structures, Bu-Ali Sina University, Iran, 2018.

Hussein G, Sayed SH, Nasr NE, Mostafa AM, "Effect of loading and supporting area on shear strength and size effect of concrete deep beams", Ain Shams Engineering Journal, 2018, 9, 2823-2831. https://doi.org/10.1016/j.asej.2017.11.002

Ibrahim MA, El Thakeb A, Mostfa AA, Kottb HA, "Proposed formula for design of deep beams with shear openings", HBRC Journal, 2018, 14, 450-465. https://doi.org/10.1016/j.hbrcj.2018.06.001.

Kheyr AA, Naderpour H, "Plastic hinge rotation capacity of reinforced concrete beams", 2007.

Legeron F, Paultre P, "Behavior of high-strength concrete columns under cyclic flexure and constant axial load", Structural Journal, 2000, 97, 591-601. https://doi.org/10.14359/7425

López AM, Sosa PF, Senach JL, Prada MÁ, "Influence of the plastic hinge rotations on shear strength in continuous reinforced concrete beams with shear reinforcement", Engineering Structures, 2020, 207, 110242. https://doi.org/10.1016/j.engstruct.2020.110242

Ma C, Xie C, Tuohuti A, Duan Y, "Analysis of influencing factors on shear behavior of the reinforced concrete deep beams", Journal of Building Engineering, 2022, 45, 103383. https://doi.org/10.1016/j.jobe.2021.103383.

Manual AU. version 6.8: Providence: Hibbit. Karlsson and Sorenson, 2008.

Mattock AH, "Discussion of Rotation Capacity of Reinforced Concrete Beams", Journal of Structual Division, 1967, 93, 519-522. https://doi.org/10.1061/JSDEAG.0001678.

Mohamed AR, Shoukry MS, Saeed JM, "Prediction of the behavior of reinforced concrete deep beams with web openings using the finite element method", Alexandria Engineering Journal, 2014, 53, 329-339. https://doi.org/10.1016/j.aej.2014.03.001

Mohamed N, Farghaly AS, Benmokrane B, Neale KW, "Flexure and shear deformation of GFRP-reinforced shear walls", Journal of Composites for Construction, 2014, 18, 04013044. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000444

Niranjan BR, Patil SS, "Analysis of RC deep beam by finite element method", International Journal of Modern Engineering Research (IJMER), 2012, 2, 4664-4667.

Panagiotakos TB, Fardis MN, "Deformations of reinforced concrete members at yielding and ultimate", Structural Journal, 2001, 98, 135-148. https://doi.org/10.14359/10181

Park R, Paulay T, "Reinforced concrete structures", John Wiley & Sons, 1991.

Paulay T, Priestley MN, "Seismic design of reinforced concrete and masonry buildings", 1992.

Pereira N, Romão X, "Damage localization length in RC frame components: Mechanical analysis and experimental observations", Engineering Structures, 2020, 221, 111026. https://doi.org/10.1016/j.engstruct.2020.111026

Pokhrel M, Bandelt MJ, "Plastic hinge behavior and rotation capacity in reinforced ductile concrete flexural members", Engineering Structures, 2019, 200, 109699. https://doi.org/10.1016/j.engstruct.2019.109699

Roy NC, Brena SF, "Behavior of deep beams with short longitudinal bar anchorages", ACI Structural Journal, 2008, 105, 460.

Herbert A, Sawyer JR, "Design of concrete frames for two failure stages", Special Publication, 1964, 12, 405-437. https://doi.org/10.14359/16726

Schlappal T, Kalliauer J, Vill M, Mang HA, Eberhardsteiner J, Pichler BL, "Ultimate limits of reinforced concrete hinges", Engineering Structures, 2020, 224, 110889. https://doi.org/10.1016/j.engstruct.2020.110889

Wang GL, Meng SP, "Modified strut-and-tie model for prestressed concrete deep beams", Engineering Structures, 2008, 30, 3489-3496. https://doi.org/10.1016/j.engstruct.2008.05.020

Yang KH, Chung HS, Lee ET, Eun HC, "Shear characteristics of high-strength concrete deep beams without shear reinforcements", Engineering structures, 2003, 25, 1343-1352. https://doi.org/10.1016/S0141-0296(03)00110-X

Zhao XM, Wu YF, Leung AY, "Analyses of plastic hinge regions in reinforced concrete beams under monotonic loading", Engineering Structures, 2012, 34, 466-482. https://doi.org/10.1016/j.engstruct.2011.10.016

Zhao X, Wu YF, Leung AY, Lam HF, "Plastic hinge length in reinforced concrete flexural members", Procedia Engineering, 2011, 14, 1266-1274. https://doi.org/10.1016/j.proeng.2011.07.159.