آمار
| تعداد نشریات | 45 |
| تعداد شمارهها | 1,518 |
| تعداد مقالات | 18,541 |
| تعداد مشاهده مقاله | 60,773,680 |
| تعداد دریافت فایل اصل مقاله | 21,640,239 |
Comparison of seismic and gravity progressive collapse in dual systems with special steel moment-resisting frames and braces | ||
| نشریه مهندسی عمران و محیط زیست | ||
| مقاله 13، دوره 52، شماره 109، 1401، صفحه 151-161 اصل مقاله (1.54 M) | ||
| نوع مقاله: مقاله کامل پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22034/jcee.2021.38392.1914 | ||
| نویسندگان | ||
| مریم موسوی زنوز1؛ محمدرضا شیدائی* 2 | ||
| 1گروه مهندسی عمران، دانشکده فنی، دانشگاه ارومیه | ||
| 2گروه مهندسی عمران، دانشکده فنی، دانشگاه ارومیه | ||
| چکیده | ||
| Progressive collapse studies generally assess the performance of the structure under gravity and blast loads, while earthquakes may also lead to the progressive collapse of a damaged structure. In this study, the progressive collapse response of concentrically braced dual systems with steel moment-resisting frames was assessed under seismic loads through pushover analysis using triangular and uniform lateral load patterns. Two different bracing types (X and inverted V braces) were considered, and their performances were compared under different lateral load patterns using the nonlinear static alternate path method recommended in the Unified Facilities Criteria (UFC) guideline. Eventually, the seismic progressive collapse resistance of models was compared to their progressive collapse response under gravity loads. These studies showed that models under the seismic progressive collapse loads satisfied UFC acceptance criteria and limited rehabilitation objective. The structures had better performance under seismic progressive collapse than models under gravity loads because of more resistance, ductility, suitable load redistribution, and more structural elements that participated in load redistribution. Furthermore, despite studies on progressive collapse under gravity loads, the dual system with X braces showed better progressive collapse performance (more resistance, residual reserve strength ratio and ductility) under seismic loads than the model with inverted V braces. | ||
| کلیدواژهها | ||
| Seismic progressive collapse؛ Dual system؛ Concentric brace؛ Alternate path method؛ Nonlinear static analysis | ||
| مراجع | ||
|
American Concrete Institute (ACI 318), “Building code requirements for structural concrete”, Farmington Hills, Mich, 2005. American Institute of Steel Construction (AISC 341), “Seismic provisions for structural steel buildings”, Chicago, US, 2016. American Institute of Steel Construction (AISC 360), “Specifications for structural steel buildings”, Chicago, US, 2016. American Society of Civil Engineers (ASCE 7), “Minimum design loads for buildings and other structures”, New York, US, 2005. American Society of Civil Engineers (ASCE 7), “Minimum design loads for buildings and other structures”, New York, US, 2010. American Society of Civil Engineers (ASCE 7), “Minimum design loads for buildings and other structures”, New York, US, 2016. Faroughi A, Moghadam AS, Hosseini M, “Seismic progressive collapse of MRF-EBF dual steel systems”, Proceedings of the Institution of Civil Engineers-Structures and Buildings, 2017, 170 (1), 67-75. Federal Emergency Management Agency (FEMA 356), “Pre standard and commentary for the seismic rehabilitation of buildings”, Washington, D.C, 2000. Fu F, “3-D nonlinear dynamic progressive collapse analysis of multi-storey steel composite frame buildings-parametric study”, Engineering Structure, 2010, 32 (12), 3974-3980. Fu F, “Response of a multi-storey steel composite building with concentric bracing under consecutive column removal scenarios”, Journal of Constructional Steel Research, 2012, 70 (1), 115-126. Galal MA, Bandyopadhyay M, Banik AK, “Vulnerability of three-dimensional semirigid composite frame subjected to progressive collapse”, Journal of Performance of Constructed Facilities, 2019, 33 (3), 1-15. General Services Administration (GSA), “Progressive Collapse Analysis and Design Guidelines for new federal office buildings and major modernization projects”, Washington DC, US, 2003. Ghobadi MS, Yakhchalian M, Yavari H, “Effects of torsional irregularity and seismicity level on progressive collapse potential of steel moment frames”, Journal of Civil and Environmental Engineering, 2018, online published. Guo L, Gao S, Fu F, “Structural performance of semi-rigid composite frame under column loss”, Engineering Structures, 2015, 95 (1), 112-126. Hosseini M, Fanaie N, Yousefi AM, “Studying the vulnerability of steel moment resistant frames subjected to progressive collapse”, Indian Journal of Science and Technology, 2014, 7 (3), 335-342. Khandelwal K, El-Tawil Sh, Sadek F, “Progressive collapse analysis of seismically designed steel braced frames”, Journal of Constructional Steel Research, 2009, 65 (3), 699-708. Kiakojouri F, De Biagi V, Chiaia B, Sheidaii MR, “Progressive collapse of framed building structures: Current knowledge and future prospects”, Engineering Structures, 2020, 206, 110061. Kiakojouri F, Sheidaii MR, De Biagi V, Chiaia B, “Progressive collapse assessment of steel moment-resisting frames using static-and dynamic-incremental analyses”, Journal of Performance of Constructed Facilities, 2020, 34 (3), 04020025. Kim J, Kim T, “Assessment of progressive collapse-resisting capacity of steel moment frames”, Journal of Constructional Steel Research, 2009, 65 (1), 169-179. Kim J, Lee Y, Choi H, “Progressive collapse resisting capacity of braced frames”, Structural Design of Tall and Special Building, 2011, 20 (2), 257-270. Kim J, Park J, “Design of special truss moment frames considering progressive collapse”, International Journal of steel structures, 2014, 14 (2), 1-13. Kordbagh B, Mohammadi M, “Influence of seismicity level and height of the building on progressive collapse resistance of steel frames”, The Structural Design of Tall and Special Buildings, 2017, 26 (2), e1305. Li S, Shan S, Zhai Ch, Xie L, “Experimental and numerical study on progressive collapse process of RC frames with full-height infill walls”, Engineering Failure Analysis, 2016, 57, 57-68. Mahmoudi M, Koozani H, Teimoori T, Hashemi SS, “Stability assessment of steel moment frames against progressive collapse”, Journal of Civil and Environmental Engineering, 2016, 46 (1), 59-67. Marjanishvili S, Agnew E, “Comparison of various procedures for progressive collapse analysis”, Journal of Performance of Constructed Facilities, 2006, 20 (4), 365-374. Musavi-Z M, Sheidaii, MR, “Effect of seismic resistance capacity of moment frames on progressive collapse response of concentrically braced dual systems”, Asian Journal of Civil Engineering, 2021, 22 (1), 23-31. National Institute of Standards and Technology (NIST), “Final Report on the Collapse of the World Trade Center Tower”, Gaithersburg, 2008. Park J, Kim J, “Fragility analysis of steel moment frames with various seismic connections subjected to sudden loss of a column”, Engineering Structure, 2010, 32 (6), 1547-1555. Rezvani FH, Asgarian B, “Effect of seismic design level on safety against progressive collapse of concentrically braced frames”, Steel and Composite Structures, 2014, 16 (2), 135-156. SAP2000, Structural Analysis Program, Computers and Structures, Berkeley, CA, 2004. Shayanfar MA, Javidan MM, “Progressive collapse-resisting mechanisms and robustness of RC frame-shear wall structures”, Journal of Performance of Constructed Facilities, 2017, 31 (5), 04017045. Straub D, Faber MH, “Risk based acceptance criteria for joints subject to fatigue deterioration”, Journal of Offshore Mechanics and Arctic Engineering, 2005, 127 (2), 150-157. Suwondo R, Cunningham L, Gillie M, Bailey C, “Progressive collapse analysis of composite steel frames subject to fire following earthquake”, Fire Safety Journal, 2019, 103, 49-58. Tavakoli HR, Rashidi Alashti A, “Evaluation of progressive collapse potential of multi-story moment resisting steel frame buildings under lateral loading”, Scientia Iranica, 2013, 20 (1), 77-86. Unified Facilities Criteria (UFC), “Design of Buildings to Resist Progressive Collapse”, Washington DC, US, 2005. Unified Facilities Criteria (UFC), “Design of Buildings to Resist Progressive Collapse”, Washington DC, US, 2016. Wang J, Wang W, Qian X, “Progressive collapse simulation of the steel-concrete composite floor system considering ductile fracture of steel”, Engineering Structures, 2019, 200, 1-18. Wibowo H, Lau DT, “Seismic progressive collapse qualitative point of view”, Civil Engineering Dimension, 2005, 11 (1), 8-14. Yousefi AM, Hosseini M, Fanaie N, “Vulnerability assessment of progressive collapse of steel moment resistant frames”, Trends in Applied Sciences Research, 2014, 9 (8), 450-460. | ||
|
آمار تعداد مشاهده مقاله: 1,036 تعداد دریافت فایل اصل مقاله: 780 |
||