تخمین ظرفیت باربری شمع های بتنی درجاریز با استفاده مستقیم از نتایج آزمایش‌های صحرایی CPT، SPT و مقایسه با بارگذاری استاتیکی شمع- مطالعه موردی

AASHTO, Standard Specifications for Highway Bridges (2002) 17^th edition, HB-17. American Association of State Highway and Transportation Officials, Washington, DC.

Abu-Farsakh MY, Titi HH, “Assessment of direct cone penetration test methods for predicting the ultimate capacity of friction driven piles”, Journal of Geotechnical and Geoenvironmental Engineering, 2004, 130 (9), 935-944.

Alielahi H, Adampira M, “Comparison between empirical and experimental ultimate bearing capacity of bored piles-a case study”, Arabian Journal of Geosciences, 2016, 9 (1), 1-16.

Bustamante M, Gianeselli L, “Pile bearing capacity prediction by means of static penetrometer CPT”, In Proceedings of the 2-nd European symposium on penetration testing, 1982, 493-500.

Cai G, Liu S, Tong L, Du G, “Assessment of direct CPT and CPTu methods for predicting the ultimate bearing capacity of single piles”, Engineering Geology, 2009, 104 (3-4), 211-222.

Cai G, Liu S, Puppala AJ, “Reliability assessment of CPTu-based pile capacity predictions in soft clay deposits”, Engineering Geology, 2012, 141, 84-91.

Canadian Foundation Engineering Manual (CFEM), 4^th Edition, Canadian Geotechnical Society, Bitech Publishers, Vancouver, 2006.

De Ruiter J, Beringen F, “Pile foundations for large North Sea structures”, Marine Georesources and Geotechnology, 1979, 3 (3), 267-314.

Dung NT, Chung SG, Kim SR, Beak SH, “Applicability of the SPT-based methods for estimating toe bearing capacity of driven PHC piles in the thick deltaic deposits”, KSCE Journal of Civil Engineering, 2011, 15 (6), 1023-1031.

Eslami A, Fellenius BH, “Pile capacity by direct CPT and CPTu methods applied to 102 case histories”, Canadian Geotechnical Journal, 1997, 34 (6), 886-904.

Eslami A, Fellenius BH, “Toe bearing capacity of piles from cone penetration test (CPT) data”, In Proceedings of the International Symposium on Cone Penetration Testing, CPT, 1995, 95, 4-5.

Eslami AA, Fellenius BH, “CPT and CPTu data for soil profile interpretation: review of methods and a proposed new approach”, Iranian Journal of Science and Technology Transaction B-Engineering, 2004, 28, B1, 69-86.

Eslami A, Aflaki E, Hosseini B, “Evaluating CPT and CPTu based pile bearing capacity estimation methods using Urmiyeh Lake Causeway piling records”, Scientia Iranica, 2011, 18 (5), 1009-1019.

Fateh AMA, Eslami A, Fahimifar A, “Direct CPT and CPTu methods for determining bearing capacity of helical piles”, Marine Georesources & Geotechnology, 2017, 35 (2), 193-207.

Fellenius B, “Basics of foundation design”, Lulu. com. 2017.

Goudreault P, Fellenius BH, “Unipile program for unified analysis of piles and pile groups considering capacity, negative skin friction, and settlement”, User Manual, Bengt Fellenius Consultants, Inc., Ottawa, 1990.

Hannigan PJ, Rausche F, Likins GE, Robinson BR, Becker ML, Geotechnical Engineering Circular No. 12, Vol. I. “Design and construction of driven pile foundations”, Publication No. FHWA-NHI-16-009, U.S. Department of Transportation, Federal Highway Administration, 2016.

Hung LC, Kim SR, “CPT-based method for toe resistance of driven piles in sand”, Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 2015, 168 (6), 498-513.

KGS., “Design criteria of structure foundations”, Korean Geotechnical Society, 2003.

Nevels JB, Snethen D, “Comparison of settlement predictions for single piles in sand based on penetration test results”, In Vertical and Horizontal Deformations of Foundations and Embankments, ASCE, 1994, 1028-1038.

Nejad FP, Jaksa MB, Kakhi M, McCabe BA, “Prediction of pile settlement using artificial neural networks based on standard penetration test data”, Computers and Geotechnics, 2009, 36 (7), 1125-1133.

Schmertmann JH, “Guidelines for cone penetration test: performance and design (No. FHWA-TS-78-209)”, United States. Federal Highway Administration, 1978.

Zhang G, Robertson PK, Brachman RWI, “Estimating liquefaction-induced lateral displacements using the standard penetration test or cone penetration test”, Journal of Geotechnical and Geoenvironmental Engineering, 2004, 130 (8), 861-871.