مدل‌سازی دینامیکی چرخ‌دنده مغناطیسی هم‌محور بر مبنای مدار معادل مغناطیسی با استفاده از روش تحلیل گره

[1]     J. Rens, R. Clark, S. Calverley, K. Atallah, and D. Howe, “Design, analysis and realization of a novel magnetic harmonic gear,” in 2008 18th International Conference on Electrical Machines, 2008, pp. 1-4.

[2]     D. H. K.Attaallah, J. Rens, and, S.Calverly, “a novel magnetic harmonic gear,” IEEE Transactions on Industry Applications Superconductivity, vol. 46, no. 1, pp. 206-212, 2010.

[3]     K. Atallah, S. D. Calverley, and D. Howe, “High-performance magnetic gears,” Journal of Magnetism and Magnetic Materials, vol. 272-276, no. Supplement, pp. E1727-E1729, 2004.

[4]     X. L. Xiaoxu Zhang , Chao Wang and Zhe Chen, “Analysis and design optimization of a coaxial surface-mounted permanent-magnet magnetic gear,” energies, vol. 7, no. 12, pp. 8535-8553, 2014.

[5]     Y. F. Xin Yin, Xiaoyan Huang, “Analytical modeling of a novel vernier pseudo-direct-drive permanent-magnet machine,” IEEE Transactions on Magnetics vol. 53, no. 6, 2017.

[6]     S. P. G. Muruganandam, and P. Selvakumar, “Design and implementation of a novel magnetic bevel gear,” Control Engineering and Applied Informatics, vol. 15, no. 2, pp. 30–37, 2013.

[7]     Y. Liu, S. L. Ho, and W. N. Fu, “A Novel Magnetic Gear With Intersecting Axes,” IEEE Transactions on Magnetics, vol. 50, no. 11, pp. 1-4, 2014.

[8]     S. Gerber, “Evaluation and design aspects of magnetic gears and magnetically geared electrical machines,” Department of Electrical and Electronic Engineering Faculty of Engineering, Stellenbosch University, 2015.

[9]     P. M. Tlali, R. J. Wang, and S. Gerber, “Magnetic gear technologies: A review,” in 2014 International Conference on Electrical Machines (ICEM), 2014, pp. 544-550.

[10]   Y. D. Yao, D. R. Huang, C. M. Lee, S. J. Wang, D. Y. Chiang, and T. F. Ying, “Magnetic coupling studies between radial magnetic gears,” IEEE Transactions on Magnetics, vol. 33, no. 5, pp. 4236-4238, 1997.

[11]   Y. D. Yao, D. R. Huang, C. C. Hsieh, D. Y. Chiang, and S. J. Wang, “Simulation study of the magnetic coupling between radial magnetic gears,” IEEE Transactions on Magnetics, vol. 33, no. 2, pp. 2203-2206, 1997.

[12]   S. Kikuchi and K. Tsurumoto, “Design and characteristics of a new magnetic worm gear using permanent magnet,” IEEE Transactions on Magnetics, vol. 29, no. 6, pp. 2923-2925, 1993.

[13]   S. Kikuchi and K. Tsurumoto, “Trial construction of a new magnetic skew gear using permanent magnet,” IEEE Transactions on Magnetics, vol. 30, no. 6, pp. 4767-4769, 1994.

[14]   J. Rens and K. Atallah, “A novel magnetic harmonic gear,” Electric Machines & Drives Conference, 2007. IEMDC '07. IEEE International, pp. 3-8, 2007.

[15]   K. Davey, L. McDonald, and T. Hutson, “Axial flux cycloidal magnetic gears,” IEEE Transactions on Magnetics, vol. 50, no. 4, 2014.

[16]   Y. Chen and F. Weinong, “A novel hybrid-flux magnetic gear and its performance analysis using the 3-D finite element method,” Energies, vol. 8, no. 5, pp. 3313-3327, 2015.

[17]   M. Chen, K.-t. Chau, C. H. T. Lee, and C. Liu, “Design and analysis of a new axial-field magnetic variable gear using pole-changing permanent magnets,” Progress In Electromagnetics Research, vol. 153, no. October, pp. 23-32, 2015.

[18]   K. Atallah and D. Howe, “A novel high-performance magnetic gear,” IEEE Transactions on Magnetics, vol. 37, no. 4, pp. 2844-2846, 2001.

[19]   L. Jian and K. T. Chau, “A coaxial magnetic gear with halbach permanent-magnet arrays,” IEEE Transactions on Energy Conversion, vol. 25, no. 2, pp. 319-328, 2010.

[20]   L. Jian, K. T. Chau, Y. Gong, J. Z. Jiang, C. Yu, and W. Li, “Comparison of coaxial magnetic gears with different topologies,” IEEE Transactions on Magnetics, vol. 45, no. 10, pp. 4526-4529, 2009.

[21]   H. Y. Li, H. Hao, M. J. Jin, and J. X. Shen, “Analytical calculation of magnetic field distribution in magnetic gears with consequent-pole rotors by subdomain method,” 2016 IEEE Vehicle Power and Propulsion Conference, VPPC 2016 - Proceedings, pp. 24-29, 2016.

[22]   J. X. Shen, H. Y. Li, H. Hao, and M. J. Jin, “A coaxial magnetic gear with consequent-pole rotors,” IEEE Transactions on Energy Conversion, vol. 32, no. 1, pp. 267-275, 2017.

[23]   J. X. Shen, H. Y. Li, H. Hao, M. J. Jin, and Y. C. Wang, “Topologies and performance study of a variety of coaxial magnetic gears,” IET Electric Power Applications, vol. 11, no. 7, pp. 1160-1168, 2017.

[24]   H. M. Shin and J. H. Chang, “Analytical magnetic field calculation of coaxial magnetic gear with flux concentrating rotor,” IEEE Transactions on Magnetics, vol. 52, no. 7, pp. 1-4, 2016.

[25]   T. Lubin, S. Mezani, and A. Rezzoug, “Analytical computation of the magnetic field distribution in a magnetic gear,” IEEE Transactions on Magnetics, vol. 46, no. 7, pp. 2611-2621, 2010.

[26]   Y.-J. Ge, C.-Y. Nie, and Q. Xin, “A three dimensional analytical calculation of the air-gap magnetic field and torque of coaxial magnetic gears,” Progress In Electromagnetics Research, vol. 131, pp. 391-407, 2012.

[27]   B. Dianati, H. Heydari, and S. A. Afsari, “Analytical computation of air-gap magnetic field in a viable superconductive magnetic gear,” IEEE Transactions on Applied Superconductivity, vol. 26, no. 6, pp. 1-12, 2016.

[28]   C.-T. Liu, K.-Y. Hung, and C.-C. Hwang, “Developments of an efficient analytical scheme for optimal composition designs of tubular linear magnetic-geared machines,” IEEE Transactions on Magnetics, vol. 52, no. 7, pp. 1-4, 2016.

[29]   M. Desvaux, B. Traullé, R. L. G. Latimier, S. Sire, B. Multon, and H. B. Ahmed, “Computation time analysis of the magnetic gear analytical model,” IEEE Transactions on Magnetics, vol. 53, no. 5, pp. 1-9, 2017.

[30]   A. Rahideh, A. A. Vahaj, M. Mardaneh, and T. Lubin, “Two-dimensional analytical investigation of the parameters and the effects of magnetisation patterns on the performance of coaxial magnetic gears,” IET Electrical Systems in Transportation, vol. 7, no. 3, pp. 230-245, 2017.

[31]   A. S. Abdel-Khalik, A. S. Elshebeny, and S. Ahmed, “Design and evaluation of a magnetic planetary gearbox for compact harsh environments,” SPEEDAM 2010 - International Symposium on Power Electronics, Electrical Drives, Automation and Motion, pp. 1178-1182, 2010.

[32]   H. N.Niguchi and K. Howe, “Transmission Torque analysis of a novel magnetic planetary gear employing 3-D FEM” IEEE Transactions on Magnetics, vol. 48, no. 2, pp. 1043-1046, 2012.

[33]   S. Peng, W. N. Fu, and S. L. Ho, “A novel triple-permanent-magnet-excited hybrid-flux magnetic gear and its design method using 3-D finite element method,” IEEE Transactions on Magnetics, vol. 50, no. 11, pp. 3313-3327, 2014.

[34]   K. Nakamura, M. Fukuoka, and O. Ichinokura, “Performance improvement of magnetic gear and efficiency comparison with conventional mechanical gear,” Journal of Applied Physics, vol. 115, no. 17, pp. 50-53, 2014.

[35]   N. Niguchi, K. Hirata, M. Muramatsu, and Y. Hayakawa, “Eddy current analysis of magnetic gear employing 3-D FEM,” Electromagnetic Field Computation (CEFC), 2010 14th Biennial IEEE Conference on, vol. 540, no. 2009, pp. 1-1, 2010.

[36]   M. Fukuoka, K. Nakamura, and O. Ichinokura, “Dynamic analysis of planetary-type magnetic gear based on reluctance network analysis,” IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 2414-2417, 2011.

[37]   M. Fukuoka, K. Nakamura, and O. Ichinokura, “RNA-based optimum design method for spm type magnetic gears,” Journal of the Magnetics Society of Japan, vol. 37, no. 3-2, pp. 264-267, 2013.

[38]   Y.-C. Wu and B.-S. Jian, “Magnetic field analysis of a coaxial magnetic gear mechanism by two-dimensional equivalent magnetic circuit network method and finite-element method,” Applied Mathematical Modelling, vol. 39, no. 19, pp. 5746-5758, 2015.

[39]   M. Johnson, M. C. Gardner, and H. A. Toliyat, “A parameterized linear magnetic equivalent circuit for analysis and design of radial flux magnetic gears—Part I: Implementation,” IEEE Transactions on Energy Conversion, vol. 33, no. 12, pp. 784-791, 2017.

 [40]  D. Han and J. H. Chang, “Design of electromagnetic linear actuator using the equivalent magnetic circuit method,” IEEE Transactions on Magnetics, vol. 52, no. 3, pp. 1-4, 2016.

[41]   P. Naderi and A. Shiri, “Modeling of ladder-secondary-linear induction machine using magnetic equivalent circuit,” IEEE Transactions on Vehicular Technology, vol. 67, no. 12, pp. 11411-11419, 2018.

 [42]  F. Abolqasemi-Kharanaq, R. Alipour-Sarabi, Z. Nasiri-Gheidari, and F. Tootoonchian, “Magnetic equivalent circuit model for wound rotor resolver without rotary transformer’s core,” IEEE Sensors Journal,  vol. 18, no. 21, pp. 8693-8700, 2018.

[43]   P. Ojaghlu, A. Vahedi, and F. Totoonchian, “Magnetic equivalent circuit modelling of ring winding axial flux machine,” IET Electric Power Applications, vol. 12, no. 3, pp. 293-300, 2017.

[44]   J.-H. Sim, D.-G. Ahn, D.-Y. Kim, and J. P. Hong, “Three-Dimensional equivalent magnetic circuit network method for precise and fast analysis of PM-assisted claw-pole synchronous motor,” IEEE Transactions on Industry Applications,  vol. 54, no. 1, pp. 160-171, 2018.

[45]   ن. پیمان, «مدل‌سازی ماشین القایی روتور سیم‌پیچی شده با اثر اشباع از طریق مدارمعادل مغناطیسی تعمیم‌یافته» , مجله مهندسی برق تبریز، جلد 47، شماره 4، صفحه 1743-1733، زمستان 1396.

[46]   J. Bao, B. Gysen, and E. A. Lomonova, “Hybrid analytical modeling of saturated linear and rotary electrical machines: integration of fourier modeling and magnetic equivalent circuits,” IEEE Transactions on Magnetics,  no. 99, pp. 1-5, 2018.

[47]   م. دولتشاهی, س. م. سقائیان نژاد, J. W. Ahn و م. معلم، «کاهش نوسانات گشتاور و تلفات اهمی در موتور سوئیچ رلوکتانس با در نظر گرفتن اثر اشباع مغناطیسی» ، مجله مهندسی برق تبریز، جلد 44، شماره 2، صفحه 21-11، تابستان 1393.

 [48]  M. Cheng, K. Chau, C. Chan, E. Zhou, and X. M. Huang, “Nonlinear varying-network magnetic circuit analysis for doubly salient permanent-magnet motors,” IEEE Transactions on Magnetics,  vol. 36, no. 1, pp. 339-348, 2000.

[49]   R. Ghanaee, A. Darabi, A. Kioumarsi, R. M. Baghayipour, and J. M. Morshed, “A nonlinear equivalent circuit model for flux density calculation of a permanent magnet linear synchronous motor,” Serbian Journal of Electrical Engineering , vol. 12, no. 3, pp. 359-373, 2015.

[50]   D. C. Hanselman, Brushless permanent magnet motor design. The Writers' Collective, 2003.

[51]   M. Rahimi, M. Durali, and M. Asghari, “A design approach to coaxial magnetic gear and determination of torque capability,” Scientia Iranica B, vol. 25, no. 2, pp. 772-789, 2018.

[52]   S. Mallampalli and V. Rallabandi, “Parametric study of magnetic gear for maximum torque transmission,” in 2014 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), 2014, pp. 1-5.