بررسی عدم قطعیت در چندلایه‌های ساخته‌شده از الیاف شیشه/اپوکسی هنگام جدایش با استفاده از روش سطح پاسخ

[1]   António, C.C. and Hoffbauer, L.N., Uncertainty propagation in inverse reliability-based design of composite structures, International Journal of Mechanics and Materials in Design, Vol. 6, pp. 89-102, 2010.

[2]   Liu, P. and Zheng, J., Strength reliability analysis of aluminium–carbon fiber/epoxy composite laminates, Journal of Loss Prevention in the Process Industries, Vol. 23, pp. 421-427, 2010.

[3]   Shaw, A., Sriramula, S., Gosling, P.D. and Chryssanthopoulos, M.K., A critical reliability evaluation of fibre reinforced composite materials based on probabilistic micro and macro-mechanical analysis, Composites Part B: Engineering, Vol. 41, pp. 446-453, 2010.

[4]   Welemane, H. and Dehmous, H., Reliability analysis and micromechanics: A coupled approach for composite failure prediction, International Journal of Mechanical Sciences, Vol. 53, pp. 935-945, 2011.

[5]   Chiachio, M., Chiachio, J. and Rus, G., Reliability in composites–a selective review and survey of current development, Composites Part B: Engineering, Vol. 43, pp. 902-913, 2012.

[6]   Adarsh, S. and Reddy, M.J., Reliability analysis of composite channels using first order approximation and monte carlo simulations, Stochastic environmental research and risk assessment, Vol. 27, pp. 477-487, 2013.

[7]   Kimiaeifar, A., Lund, E., Thomsen, O.T. and Sørensen, J.D., Asymptotic sampling for reliability analysis of adhesive bonded stepped lap composite joints, Engineering Structures, Vol. 49, pp. 655-663, 2013.

[8]   Gosling, P.D. and Polit, O., A high-fidelity first-order reliability analysis for shear deformable laminated composite plates, Composite Structures, Vol. 115, pp. 12-28, 2014.

[9]   Shayanfar, M.A., Barkhordari, M.A. and Roudak, M.A., Locating design point in structural reliability analysis by introduction of a control parameter and moving limited regions, International Journal of Mechanical Sciences, Vol. 126, pp. 196-202, 2017.

[10]              Akula, V.M., Multiscale reliability analysis of a composite stiffened panel, Composite Structures, Vol. 116, pp. 432-440, 2014.

[11]              Zhang, S., Zhang, C. and Chen, X., Effect of statistical correlation between ply mechanical properties on reliability of fibre reinforced plastic composite structures, Journal of Composite Materials, Vol. 49, pp. 2935-2945, 2015.

[12]              Zhang, S., Zhang, L., Wang, Y., Tao, J. and Chen, X., Effect of ply level thickness uncertainty on reliability of laminated composite panels, Journal of Reinforced Plastics and Composites, Vol. 35, pp. 1387-1400, 2016.

[13]              Zhou, X.-Y., Gosling, P., Ullah, Z. and Pearce, C., Exploiting the benefits of multi-scale analysis in reliability analysis for composite structures, Composite Structures, Vol. 155, pp. 197-212, 2016.

[14]              [Delbariani-Nejad, A., Farrokhabadi, A. and Jafari, S.R., An energy based approach for reliability analysis of delamination growth under mode i, mode ii and mixed mode i/ii loading in composite laminates, International Journal of Mechanical Sciences, Vol. 145, pp. 287-298, 2018.

[15]              Box, G.E. and Wilson, K.B., On the experimental attainment of optimum conditions, Journal of the Royal Statistical Society: Series B (Methodological), Vol. 13, pp. 1-38, 1951.

[16]              Giunta, A.A., Aircraft multidisciplinary design optimization using design of experiments theory and response surface modeling methods, Virginia Tech, 1997.

[17]              Bucher, C.G. and Bourgund, U., A fast and efficient response surface approach for structural reliability problems, Structural safety, Vol. 7, pp. 57-66, 1990.

[18]              Lemaire, M., Structural reliability, John Wiley & Sons, 2013.

[19]              Rosenblatt, M., Remarks on a multivariate transformation, The annals of mathematical statistics, Vol. 23, pp. 470-472, 1952.

[20]              Xiaoping, D., Probabilistic engineering design, Teaching Notes, September, 2005.

[21]              ASTM, D., 5528-01: Standard test method for mode i interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites, Annual book of ASTM Standards, Vol. 15, 2001.

[22]              WK22949, A., New test method for determination of the mode ii interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites using the end-notched flexure (enf) test, American Society for Testing and Materials, West Conshohocken, 2009.

[23]              ASTM, D., 6671/d 6671m-06. Standard test method for mixed mode i–mode ii interlaminar fracture toughness of unidirectional fiber reinforced polymer matrix composites, Annual book of ASTM Standards, Vol. 15, 2004.

[24]              Kenane, M. and Benzeggagh, M., Mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites under fatigue loading, Composites Science and Technology, Vol. 57, pp. 597-605, 1997.

[25]              Kenane, M., Delamination growth in unidirectional glass/epoxy composite under static and fatigue loads, Physics Procedia, Vol. 2, pp. 1195-1203, 2009.

[26]              Der Kiureghian, A., Haukaas, T. and Fujimura, K., Structural reliability software at the university of california, berkeley, Structural safety, Vol. 28, pp. 44-67, 2006.

[27]              Cheng, G., Xu, L. and Jiang, L., A sequential approximate programming strategy for reliability-based structural optimization, Computers & Structures, Vol. 84, pp. 1353-1367, 2006.

[28]              Ducept, F., Davies, P. and Gamby, D., An experimental study to validate tests used to determine mixed mode failure criteria of glass/epoxy composites, Composites Part A: Applied Science and Manufacturing, Vol. 28, pp. 719-729, 1997.