مطالعه اثر سقف کامپوزیت در کنترل تخریب پیش رونده ساختمان‌های قاب خمشی فولادی

AISC 360. Specification for Structural Steel Buildings. One East Wacker Drive, Suite 700, Chicago, Illinois 60601-1802: American National Standard, 2016.

ASCE/SEI 7. “Minimum design loads for buildings and other structures (ASCE/SEI 7-16)”, In American Society of Civil Engineers, 2016.

Chen, Chang Hong, Yan Fei Zhu, Yao Yao, Ying Huang, and Xu Long, “An evaluation method to predict progressive collapse resistance of steel frame structures”, Journal of Constructional Steel Research, 2016, 122, 238-50.

CSI. “Linear and nonlinear static and dynamic analysis and design of three-dimensional structures”, Berkeley (CA, USA), Computers and Structures Inc, 2016.

Dimopoulos, Christoforos A, Fabio Freddi, Theodore L Karavasilis, George Vasdravellis, “Progressive collapse resistance of steel self-centering mrfs including the effects of the composite floor”, Engineering Structures, 2020, 208, 109923.

Dimopoulos, Christoforos, Fabio Freddi, Theodore Karavasilis, George Vasdravellis, “3D numerical assessment of the progressive collapse resistance of a seismic-resistant steel building with post-tensioned beam-column connections”, In 9^th Greek National Steel Structures Conference, 2017.

Ellingwood, Bruce R, Robert Smilowitz, D O Dusenberry, Dat Duthinh, Hai S Lew, Nicholas J Carino, “Best practices for reducing the potential for progressive collapse in buildings”, NIST Interagency/Internal Report (NISTIR), 7396, 2007.

Fema 356, “Fema 356: prestandard and commentary for the seismic rehabilitation of buildings in rehabilitation requirements”, American Society of Civil Engineers Washington, DC, USA, 2000.

Fu, Qiu Ni, Kang Hai Tan, “Parametric effects on composite floor systems under column removal scenario”, Engineering Structures, 2019, 187, 161-76.

Fu, Qiu Ni, Kang Hai Tan, Xu Hong Zhou, Bo Yang. “Three-dimensional composite floor systems under column-removal scenarios”, Journal of Structural Engineering, 2018, 144 (10), 4018196.

Fu, Qiuni, Kang-Hai Tan, “Numerical study on steel-concrete composite floor systems under corner column removal scenario”, In Structures, 2019, 21, 33-44, Elsevier.

Gerasimidis S, Sideri J, “A new partial-distributed damage method for progressive collapse analysis of steel frames”, Journal of Constructional Steel Research, 2016, 119, 233-45.

GSA, “Progressive collapse analysis and design guidelines for new federal office buildings and major modernization projects”, Washington, DC. 2016.

Hadjioannou, Michalis, Sean Donahue, Eric B Williamson, Michael D Engelhardt, “Large-scale experimental tests of composite steel floor systems subjected to column loss scenarios”, Journal of Structural Engineering, 2018, 144 (2), 4017184.

IBCS, “Iranian building codes and standards, iranian code of practice for seismic resistant design of buildings, standard no.2800, 4th edition”, 2013.

INBC Part 10^th, “Iranian national building code, part 10^th, design and construction of steel buildings”, 2013.

INBC Part 21^th, “Iranian national building code, passive defense, draft 01”, 2009.

INBC Part 21^th, “Iranian national building code , passive defense, eddition 01”, 2013.

INBC Part 21^th, “Iranian national building code, passive defense, eddition 02”, 2017.

INBC Part 6^th, “Iranian national building code, part 6^th , design loads for buildings”, 2013.

Johnson, Eric S, Jeffrey E Meissner, Larry A Fahnestock. “Experimental behavior of a half-scale steel concrete composite floor system subjected to column removal scenarios”, Journal of Structural Engineering, 2016, 142 (2), 4015133.

Khandelwal, Kapil, Sherif El-Tawil, “Collapse behavior of steel special moment resisting frame connections”, Journal of Structural Engineering, 2007, 133 (5), 646-55.

Kim, Jinkoo, Dawoon An, “Evaluation of progressive collapse potential of steel moment frames considering catenary action”, The Structural Design of Tall and Special Buildings, 2009, 18 (4), 455-65.

Kim, Jinkoo, Taewan Kim, “Assessment of progressive collapse-resisting capacity of steel moment frames”, Journal of Constructional Steel Research, 2009, 65 (1), 169-79.

Kim, Seonwoong, Cheol-Ho Lee, Kyungkoo Lee, “Effects of floor slab on progressive collapse resistance of steel moment frames”, Journal of Constructional Steel Research, 2015, 110, 182-90.

Kong DY, Bo Y, Elchalakani M, Kang Chen, Lu-Ming Ren, “Progressive collapse resistance of 3d composite floor system subjected to internal column removal: experiment and numerical simulation”, Journal of Constructional Steel Research, 2020, 172, 106208.

Li T, Zhongfeng Shang YJ, Chuanqing L, “Research on catenary action of frame structure in progressive collapse with fiber model”, In 3rd International Conference on Mechatronics, Robotics and Automation, Atlantis Press, 2015.

Mahmoudi M, Hazhir Koozani T, Teimoori S Sh, Hashemi, “Stability assessment of steel moment frames against progressive collapse”, 2016.

Mehdizadeh, Kourosh, Abbas Karamodin, “Evaluation the possibility of the occurrence of progressive collapse in steel moment frames (ordinary, intermediate and special) due to sudden column removal”, Journal of Structural and Construction Engineering, 2018, 5 (3), 85-105.

MPO 360, Instruction for Seismic Rehabilitation of Existing Buildings, Office of Deputy for Strategic Supervision Department of Technical Affairs, No. 360 ,First Revision.

Pirmoz, Akbar, Min Max Liu, “Finite element modeling and capacity analysis of post-tensioned steel frames against progressive collapse”, Engineering Structures, 2016, 126, 446-56.

Ren, Lu-Ming, Bo Yang, Kang Chen, Ya-Juan Sun, De-Yang Kong, “Progressive collapse of 3d composite floor systems with rigid connections under external column removal scenarios”, Journal of Structural Engineering, 2020, 146 (11), 4020244.

Rezvani, Farshad Hashemi, Amir Mohammad Yousefi, and Hamid Reza Ronagh, “Effect of span length on progressive collapse behaviour of steel moment resisting frames”, In Structures, 2015, 3, 81-89. Elsevier.

SIMULIA, “Abaqus/CAE 6.14 User’s Manual”, Dassault Systémes Inc. Providence, RI, USA, 2014, 1-1146.

Song, Brian I, Halil Sezen, “Experimental and analytical progressive collapse assessment of a steel frame building”, Engineering Structures, 2013, 56, 664-72.

Starossek, Uwe, “Progressive collapse of structures: nomenclature and procedures”, Structural Engineering International, 2006, 16 (2), 113-17.

Starossek, Uwe, Progressive Collapse of Structures, 153, thomas telford London, 2018.

UFC, Design of Buildings to Resist Progressive Collapse. Department of Defence, 2009.

Wang, Junjie, Wei Wang, Yihai Bao, Dawn Lehman, “Full-scale test of a steel moment-resisting frame with composite floor under a penultimate edge column removal scenario”, Journal of Constructional Steel Research, 2019, 162, 105717.

Wang, Junjie, Wei Wang, Yihai Bao, Dawn Lehman, “Numerical investigation on progressive collapse resistance of steel-concrete composite floor systems”, Structure and Infrastructure Engineering, 2020, 1-15.

Wang, Junjie, Wei Wang, Dawn Lehman, Charles Roeder. “Effects of different steel-concrete composite slabs on rigid steel beam-column connection under a column removal scenario”, Journal of Constructional Steel Research, 2019, 153, 55-70.

Zhang, Jing-Zhou, Guo-Qiang Li, Jian Jiang, “Collapse of steel-concrete composite frame under edge-column loss-experiment and its analysis”, Engineering Structures, 2020, 209, 109951.

Zhang, Jing-Zhou, Guo-Qiang Li, Jian Jiang, Wen-Jin Zhang, “Collapse resistance of composite framed-structures considering effects of slab boundary restraints”, Journal of Constructional Steel Research, 2019, 158, 171-81.