روی‌کردی جدید به‌منظور کمّی‌سازی سهم هارمونیکی ولتاژ و جریان هر یک از منابع هارمونیک‌زا در شبکه‌های به‌هم‌پیوسته مبتنی‌بر حداکثر کاهش دامنه هارمونیک

[1]      علیرضا حسنی اصل، مهدی معلم، محمد کیوان‌فرد، «بهبود عملکرد فیلترهای هارمونیکی جبران‌کننده استاتیکی توان راکتیو برای کوره‌های قوس الکتریکی با آنالیز حساسیت و استفاده از نتایج عملی»، مجله مهندسی برق دانشگاه تبریز، دوره 46، شماره 1، صفحات 75-86،     بهار 1395.

[2]      محسن محمودی، علی عجمی، ابراهیم سیفی نجمی، «طراحی و کنترل ساختارهای جدید پایش‌گر یکپارچه کیفیت توان بین خطی بر اساس مبدل‌های چندپورته AC/AC»، مجله مهندسی برق دانشگاه تبریز، دوره 46، شماره 2، صفحات 237-250، تابستان 1395.

[3]      K. M. Islam, and A.H. Samra, “Identification of harmonic sources in power distribution systems,” Southeastcon'97. Engineering new New Century. IEEEProceedings, pp. 301-303, 1997.

[4]      W. Xu, X. Liu and Y. Liu, “An investigation on the validity of power-direction method for harmonic source determination,” IEEE Transactions on Power Delivery, vol. 18, no. 1, pp. 214-219, 2003.

[5]      W. Xu and Y. Liu, “A method for determining customer and utility harmonic contributions at the point of common coupling,” IEEE Transactions on Power Delivery, vol. 15, no. 2, pp. 804-811, 2000.

[6]      C. Li and W. Xu, “On defining harmonic contributions at the point of common coupling,” IEEE Power Engineering Review, vol. 22, no. 7, pp. 44-45, 2002.

[7]       N. Hamzah, A. Mohamed and A. Hussain, “Harmonic source location at the point of common coupling based on voltage magnitude,” TENCON 2004. 2004 IEEE Region 10 Conference, vol. 100, pp. 220-223, 2004.

[8]      C. Chen, X. Liu, D. Koval, W. Xu and T. Tayjasanant, “Critical impedance method-a new detecting harmonic sources method in distribution systems,” IEEE Transactions on Power Delivery, vol. 19, no. 1, pp. 288-297, 2004.

[9]      S. F. de Paula Silva and J. C. de Oliveira, “The sharing of responsibility between the supplier and the consumer for harmonic voltage distortion: A case study,” Electric Power Systems Research, vol. 78, no. 11, pp. 1959-1964, 2008.

[10]      M. Farhoodnea, A. Mohamed, H. Shareef and H. Zayandehroodi, “An enhanced method for contribution assessment of utility and customer harmonic distortions in radial and weakly meshed distribution systems,” International Journal of Electrical Power & Energy Systems, vol. 43, no. 1, pp. 222-229, 2012.

[11]      H. Hua, X. Jia, D. Cao and C. Zhao, “Practical method to determine the harmonic contribution of a specific harmonic load,”  Harmonics and Quality of Power (ICHQP), IEEE 15th International Conference, pp. 769-773, 2012.

[12]      Z. Po. Du, J. Arrillaga, N. R. Watson and S. Chen, “Identification of harmonic sources of power systems using state estimation,” IEE Proceedings-Generation, Transmission and Distribution, vol. 146, no. 1, pp. 7-12, 1999.

[13]      G. D'Antona, C. Muscas and S. Sulis, “State estimation for the localization of harmonic sources in electric distribution systems,” IEEE Transactions on Instrumentation and Measurement, vol. 58, no. 5, pp. 1462-1470, 2009.

[14]      E. Gursoy, and D. Niebur, “Harmonic load identification using complex independent component analysis,”  IEEE Transactions on Power Delivery, vol. 24, no. 1, pp. 285-292, 2009.

[15]      K. Pulimera and P. K. Rajan, “Independent component analysis for harmonic source estimation from piecewise constant parameter mixed measurements,” In System Theory (SSST), IEEE 43rd Southeastern Symposium, pp. 81-86, 2011.

[16]      A. Kumar, B. Das and J. Sharma, “Determination of location of multiple harmonic sources in a power system,” International journal of electrical power & energy systems, vol. 26, no. 1,        pp. 73-78, 2004.

[17]      A. R. Abdullah, G. Z. Peng, S. A. Ghani and M. H. Jopri, “A new vector draft method for harmonic source detection at point of common coupling,” Power Engineering and Optimization Conference (PEOCO), IEEE 8th International, pp. 110-114, 2014.

[18]      PowerFactory - DIgSILENT, “1 Harmonic Load Characteristic,” Retrieved June 2018, https://www.digsilent.de/en/faq-reader-powerfactory/how-do-i-model-a-load-containing-harmonic-components-based-on-its-spectrum/tags/load%2Charmonics.html